(555) 432-1000,
, , 100 Montgomery St. 10th Floor

Ten plus years experience in the Welding industry.

Talented professional experienced in welding, metal cutting. Brings strong attention to safety and quality. Team player with skills to read, understand and implement complex instructions.

Thorough and safety-focused professional with knowledge of welding and fabrication an design dedicated to cutting costs without sacrificing project quality and completing jobs on time. Skilled at welding processes using mig ,spray mig ,fluxcore spool gun, stick an tig welding on carbon steel stainless steel aluminum from sheet pipe an plate in structural an different size an thicknesses committed safety, efficiency and accuracy. Proven history of reliability. Working with different metalworking techniques, types of projects and environmental conditions. Works independently or as a team to accomplish project goals and consistently completes assignments on-time. Skills include brazing, welding and flame cutting.

Dedicated employee known for punctuality, pursuing employment options where good customer service and positive attitude will make a difference.

Motivated professional offering certification in welding an fabrication. Adds value to any organization in need of great collaboration, interpersonal, and multitasking abilities. Meets tight deadlines every time.

Flexible hard worker ready to learn and contribute to team success.

  • Decision Making
  • Overhead Welding Position
  • Stainless Steel Metal Welding
  • Flat Welding Position
  • Torch Installation
  • Filler Rod Selection
  • Power Tools Operation
  • Mathematical Calculations
  • Welding Techniques
  • Aluminum Metal Welding
  • Attention to Detail
  • Equipment Selection
  • Micrometers and Calipers
  • Vertical Welding
  • Hand Tools Use
  • Cast Iron Metal Welding
  • Time Management
  • Surface Material Preparation
  • Gas Metal Arc Equipment
  • Blueprints Analysis
  • Portable Grinders
  • Template Design
  • Operations Planning
  • Metallurgy Process
  • Welding Models
  • Customer Service
  • Welding Chart Specifications Compliance
  • Process Monitoring
  • Assembly Planning
  • Combination Metal Welding
  • Layout Planning
  • Work Order Analysis
  • Defective Material Identification
  • Straightedge Measurements
  • Workpiece Measurements
  • Fire Suppression Methods
  • Material Tagging
  • Engineering Drawings Analysis
  • Quality Control Analysis
Education and Training
New Smyrna Beach High School New Smyrna Beach, FL Expected in 05/2019 High School Diploma : - GPA :
Tulsa Welding School and Technology Center Houston, TX Expected in 05/2017 Certified welding specialist : - GPA :
Daytona State College Daytona Beach, FL Expected in 05/2003 : Business Administration - GPA :
ATI Actuators - Welding Fabrication an Design
City, STATE, 12/2019 - 12/2019
  • Experience working with the four main welding process MIG, TIG, STICK, FLUX CORE an the use of a Spool Gun also a push pull method or Mig Aluminum, specialize in thin gauge an light weight.
  • Able to read and interpret blueprints, custom shop drawings.
  • Also customers personal sketches.
  • Got recertified at Tulsa Welding School On May 2018.
  • Specialize in Tig welding, thin gauge aluminum, stainless steel an sheet carbon an cold rolled steel.
  • Production Aluminum Mig and Tig welding, Light weight thin gauge.
  • Detailed oriented Great team player, Work well in a fast Passed manufacturing environment.
  • Follow all safety precautions, steady hands.
  • Knowledge of different types of metals an their specific properties.
  • Follow welding procedures according to ASME guidelines.
  • Able to read blue prints, to determine appropriate equipment an methods based on requirements.
  • Set up an use manual an semi automatic welding equipment for various positions vertical horizontal an over head.
  • Repair products weld pieces fill gaps, grind chip deburr or cut, to prepaid metals or parts to weld.
  • Also weld using Arc an oxy-fuel welding, for pipe plate an structural.
  • GTAW - Gas Tungsten Arc Welding (TIG).
  • SMAW- Shielded Metal Arc Welding (STICK).
  • GMAW - Gas Metal Arc Welding (MIG).
  • FCAW - Flux Core Arc Welding (FLUX CORE).
  • Aluminum – Spool Gun an Mig Push an Pull method.
  • Years of oxy acetylene torch, plasma cutting, an arc gouging.
  • Mig an Spray Mig welding.
  • Laying out Cutting an Prepping of the various size an Shapes of metal to assemble the different types of Actuators An Valves.
  • Grinding, plasma cutting an gas torch cutting.
  • Turn table an positioner.
  • Reading prints an interpreting in to the different pumps an Actuators an Valves.
  • Rigid Global Buildings.
  • Checked cut length frequently for deviation in cut length specs.
  • Deposited intermittent tack welds for fit-up and alignment of work assemblies.
  • Stacked finished product on pallets according to packaging standard.
  • Produced work using appropriate welding techniques, metallurgy knowledge and engineering requirements.
  • Used [Tool] to cut, contour and bevel metal and structural shapes to accurate dimensions.
  • Safely ignited torches and [Tool] while closely monitoring surroundings to effectively complete [Type] projects.
Rigid Global Industry - Welding an Fabrication
City, STATE, 12/2014 - 12/2019
  • Structural welding and fabrication.
  • Welded structural Beams, Girders an Truss Beams etc.
  • Utilizing Mig and Stick Welding Process.
  • Read and interpret structural prints, drawings and custom sketches.
  • Worked with Carbon steel, Cold rolled, Stainless steel, Aluminum an various Exotic metals.
  • Verified product quality by checking products for accuracy and completing necessary adjustments.
  • Prepared metals for industrial processes by cleaning, degreasing and removing impurities from raw materials.
  • Followed Occupational Safety and Health Administration (OSHA) regulations to promote safe work environment.
  • Repaired workplace equipment when needed and inspected it for damage after every shift.
All Business Welding And Fabrication - Specialty Welding Fabrication
City, STATE, 12/2008 - 12/2014
  • The welding and fabrication of structural and piping an oil field related products.
  • Welding of pump skids for oil and gas, Trailers, Stairs, railings and what the customers specifically needed etc.
  • Assisting in planning the laying out of projects.
  • Ordering, buying of the materials an keeping records an following a budget.
  • Read and followed blueprints and weld diagrams.
  • Deposited intermittent tack welds for fit-up and alignment of work assemblies.
  • Used jigs, fixtures and tools for assembly of parts and components.
  • Stacked finished product on pallets according to packaging standard.
  • Checked angle of pipe on angle table.
  • Set up and operated welding equipment to complete all welding projects on-time.
  • Adjusted weld machines to correct settings for precision and waste reduction.
  • Cleaned and inspected parts and assemblies at each production stage and documented production defects.
  • Produced work using appropriate welding techniques, metallurgy knowledge and engineering requirements.
  • Positioned and clamped workpieces together and properly assembled in jigs and fixtures.
  • Getting an certification in welding
  • 6"Heavy wall piping, 6010 open root, 7018 Hot Pass, Fill a Cap.
  • 6G certified.
  • 5’’ Heavy wall pipe with a 70 degree bevel an a 1/8” landing Tig ER70S filler wire , open root, hot pass, Fill a Cap.
  • 6G certified.
  • 2” Heavy wall pipe with a 70 degree bevel and a 1/8” landing Tig ER70S filler wire, open root, Hot pass, Fill a Cap.
  • 6G certified.
  • 2’’ Heavy wall pipe with a 70 degree bevel an a 1/8” landing, Gas purge, Tig ER308L Stainless steel filler wire , open root, Hot pass, Fill an Cap.
  • 6G certified.
  • Plat with a 70 degree bevel an a 1/4” with a 3/32 landing ,Mig open root, hot pass, Fill a Cap.
  • Vertical an overhead position.
  • Plat with a 70 degree bevel an a 1/4” gap.
  • With a backer plate, Duel Shield Flux Core open root, hot pass, Fill a Cap Vertical positions.
  • Also I have been certified at Rigid Global to spray Mig up to a 1” plate bend an x-ray tested.
  • Also I have several years of Code Welding an Combo welding experience.
  • Recognized as Employee of the department for outstanding performance and team contributions.
  • Developed relationships with many new clients and typically exceeded sales goals by 20%
  • Consistently maintained high customer satisfaction ratings.

By clicking Customize This Resume, you agree to our Terms of Use and Privacy Policy


Resumes, and other information uploaded or provided by the user, are considered User Content governed by our Terms & Conditions. As such, it is not owned by us, and it is the user who retains ownership over such content.

How this resume score
could be improved?

Many factors go into creating a strong resume. Here are a few tweaks that could improve the score of this resume:


resume Strength

  • Formatting
  • Measurable Results
  • Personalization
  • Target Job

Resume Overview

School Attended

  • New Smyrna Beach High School
  • Tulsa Welding School and Technology Center
  • Daytona State College

Job Titles Held:

  • Welding Fabrication an Design
  • Welding an Fabrication
  • Specialty Welding Fabrication


  • High School Diploma
  • Certified welding specialist

By clicking Customize This Resume, you agree to our Terms of Use and Privacy Policy

*As seen in: