Seeking a Electrical engineering position at Executive Alliance that gives me the opportunity to work with the company in changing the world through advancing the limits of electrical engineering and design.
Undergraduate Writing Studio Consultant03/2017 to Current
Collaborated with students to discuss on a topic and consulted on facts and points that helped them make their report better.
Researched about various articles on studio pedagogy that helped us enhance our work as studio consultants.
Graduate Level Engineering Design Projects
Power flow study.
Calculated Power flow for an 8 bus (5 PQ, 2 PV, and 1 slack) using Gauss -Seidel analysis to observe the voltages and power rating at each bus.
Computed the admittance matrix and N-1 contingency for the 8 bus system and verified the results using values obtained from PowerWorld.
Fault analysis for a 5 bus system.
Calculated the sub transient fault currents for a bolted line-line fault from phase B to C for all 5 bus to determine the settings for current transformers (CT's).
Computed the zero, positive, and negative sequence networks and used the matrix calculation method to find admittance matrix which was later verified with results from PowerWorld.
Report on blackouts.
Examined the root causes of the major blackout that happened in 2006, 2011, 2003 and 1977.
Identified the factors that worked as per the requirement and the factors that did not work well and the Proposed changes made to the system to tackle such situation.
Power factor correction using Vienna rectifier.
Designed and implemented a unidirectional, three-phase, three-switch, three-level PWM to eliminate input current harmonics.
Successfully ran the inverter with an efficiency of 93%, having a 230V RMS supply and 3KW operating power
Closed loop control loop for a three phase RL load.
Controlled the d-axis and q-axis currents by use of command 'Id' and 'Iq' to control the switching cycle generated by space vector PWM.
Generator angle was used for the purpose of reference frame transformation.
Fully differential operational amplifier.
Engineered a fully differential amplifier by using a telescopic cascade amplifier with a common source as the second stage amplifier with miller compensation to attain an open loop gain of 100db.
Devised the transistor sizes to achieve a settling time of 75ns, a settling error of 0.01% and closed loop gain of 5.
Mutual Inductance based Lead-Bismuth Eutectic (LBE) level detector.
Engineered a level sensor that exploits the property of high temperature Lead-Bismuth Eutectic (LBE) to measure its level.
Evaluated the feasibility and working of the design using Comsol obtained plots for key parameters to find the most suitable operating point for high efficiency and the results from simulation were compared to results from the mathematical model created on Matlab.
Energy Project Technical Assistant06/2016 to 09/2016
Computed the energy consumption of 5 buildings on campus and suggested modifications for reduction in energy consumption, ultimately expense per annum on energy usage.
Initiated the practices of include scheduling and trending in building automation systems (BAS).
Mooring system for Wave Energy Converter (WEC Analyzed the following mooring systems for suitability with WEC: catenary anchor leg, turret, single anchor leg, fixed tower, and tethered.
Tested Single point absorber model in WEC-sim for all the forces acting on the mooring line and tracked the relation between the height of the wave and the force on the line.
The movement of the lines with respect to 2 dimensional planes were also observed.
04/2016 to 09/2016Sustainability Office, Oregon State UniversityCorvallis
Maintenance Intern06/2013 to 07/2013Bhabha Atomic Research Center BARCMumbai
Tested and calibrated differential capacitance type pressure gauge and diaphragm type pressure gauges for better accuracy.
Explored the design, working and calculation of various gauges and their specification.
Writing center, Oregon State University, Corvallis.
Education and Training
Masters of Engineering: Electrical EngineeringAugust 2017Oregon State UniversityElectrical Engineering
Bachelors of Engineering: Instrumentation EngineeringJune 2015Mumbai University (MU)Instrumentation Engineering