Fitter Resume Example

• Fit bulkheads / inserts / units using blueprints, jacks, come along, dogs, wedges

• Weld brackets, verticals, overhead, flat, ceramic, using SMAW / GMAW

• Proficient with a Plasma cutting / washing

• Air arcing, grinding and cutting discs

• Confident with tape measure standard or metric, use of speed square, levels, plum bob

• High reach certified, OSHA certified

Practical knowledge of repairing and refurbishment procedures

• Hands on experience of using variety of maintenance and repairing tools

• Familiar with performing preventive repairing to make certain that no damage occurs

• Highly skilled in Painting

• Effective written and oral communication skills.

• Outstanding talent to read and understand design patterns and manuals

Rigger:

• Proficient in moving heavy equipment

• Expertise in prepping and loading machines

• Skill in disassembling and disconnecting and reassembly of machines

• Ensured all safety and security regulations where adhered

Fitted, formed, cut, and tack welded sheets, angles, brackets, and round and flat bars of steel using a torch, a welding machine, a welding line and rods, a hammer, a level, comealong, and wedges Weld brackets, verticals, overhead, flat, ceramic, using SMAW / GMAW

• Followed blueprint specifications and national, yard, and industry standards Air arcing, grinding and cutting discs

• Determined logistics of work setup and execution, Measured and managed materials

• Align parts in relation to each other, using jacks, turnbuckles, clips, wedges, and mauls.

• Install packing, gaskets, liners, and structural accessories and members, such as doors, hatches, brackets, and clips using blueprints.

• Tack weld clips and brackets in place prior to permanent welding.

• May roll, bend, flange, cut, and shape plates, beams, and other heavy metal parts, using shop machinery, such as plate rolls, presses, bending brakes, and joggle machines.

Align parts in relation to each other, using jacks, turnbuckles, clips, wedges, and mauls.

• Install packing, gaskets, liners, and structural accessories and members, such as doors, hatches, brackets, and clips using blueprints.

• Tack weld clips and brackets in place prior to permanent welding.

• May roll, bend, flange, cut, and shape plates, beams, and other heavy metal parts, using shop machinery, such as plate rolls, presses, bending brakes, and joggle machines.

• Cut and bore holes in structures, such as bulkheads, decks, walls, and mains, prior to pipe installation, using hand and power tools.

• Modify, clean, and maintain pipe systems, units, fittings, and related machines and equipment, following specifications and using hand and power tools.

• Turn valves to shut off steam, water, or other gases or liquids from pipe sections, using valve keys or wrenches.

• Remove and replace worn components.

• Inspect work sites for obstructions and to ensure that holes will not cause structural weakness.

• Operate motorized pumps to remove water from flooded manholes, basements, or facility floors.