Livecareer-Resume
Jessica
Claire
resumesample@example.com
(555) 432-1000,
Montgomery Street, San Francisco, CA 94105
:
Summary
Mechanical Engineer with more than [Number] years of progressive experience specializing in project team supervision, energy efficiency analysis and machine and mechanical design.
Highlights
ASME, ASTM , MSS, API, NEMA, ANSI/ASME B 31.1/3 /4/8, B16.5, B16.34, B16.9, ASME VIII ,ANSI, API, WRC 107, WRC 297, API 610, API 620, API 650. API 653, NFPA 30 and DOT Part 192, 195.
  • Facility and plant modifications
  • Pump and piping systems
  • ASME
  • Stress and strain analysis
  • Hand stress calculations
  • Material science
Education
San Francisco State University San Francisco, CA Expected in 2013 Bachelor of Arts : Business Administration - GPA :
Accomplishments
Led new product management team that designed and developed the biggest cost saving project in company history. Recognized by [Organization Name] for contributions to [Project Name]. Contributed to development of [Product Name], earning sales of over $[Number].
Experience
Wood Plc - Senior Piping and Material Engineer
Bay City, TX, 06/2015 - Present
  • Methanol Plant Louisiana USA For Methanal Plant in Louisiana: Prepared piping specifications and standards.
  • Developed fabrication/construction/ Material specifications for piping components..
  • Coordinated with Department engineers/specialists members: metallurgists, welding engineers, piping MTO for pipe materials specifications.
  • Reviewed, commented and stamped Piping Stress calculation done by others in Krakow Poland and New Delhi India.
  • Lead responsibility for technical direction of a group of engineers or functions as a technical specialist formulating and developing advanced engineering concepts, techniques, and standards Selected appropriate piping material and ratings per ASME B16.5, based on material selection diagrams (MSDs), Process Flow Diagrams (PFDs).
Dow Chemical Company - Lead Principal Piping /Material Engineer
Croydon, PA, 01/2014 - 01/2015
  • Prepared piping specifications for corporate standards.
  • Liquid Natural Gas (LNG) pre feed studies for Ethane Plant and LNG Plant.
  • Supervised, advised, and assigned work to a team of 3 piping stress and material engineers.
Jacobs Engineering Group Inc. - Sr. Piping Engineer
, , United Kingdom 09/2012 - Current
  • Identified the most efficient and acceptable resolutions to complex engineering problems. Planned, scheduled and coordinated detailed phases of large-scale projects. Recommended design modifications to eliminate machine and system malfunctions. Recommended design modifications to eliminate machine and system malfunctions. Pipe Stress Analysis) A leading EPC Firm in the Houston, TX area that supports the aviation, oil & energy, defense, environmental and utilities markets is looking to bring on a Sr.
  • Piping Engineer (Pipe Stress) to support their team on a long term (1 year) contract basis.
  • The group ranks among the top 10 design firms for the power industry market, and nearly 40 percent of its revenues is earned from projects specifically within that market.
  • They are also ranked one of the Fortune 100's top best places 20 to work! ROLE: Executed complex assignments requiring the use of advanced techniques, resulting in the development of new or improved processes, equipment and/or technological methods.
  • Developed and evaluated plans for major projects.
  • Assessed feasibility or soundness of proposed applications when data is insufficient or testing is advisable.
  • Coordinated departmental or divisional project studies, reports or project design assignments.
  • Progressive design and project management responsibilities.
  • Provide leadership, guidance and instruction to less experienced staff members.
  • Regularly meets and corresponds with clients or outside personnel.
  • Some marketing responsibilities.
  • Other duties as assigned.
  • Requirements: Pipe Stress Analysis experience utilizing Caesar Software Excellent written & verbal communication skills.
  • Strong analytical and problem solving skills.
  • This position requires an individual capable of applying intensive and diversified knowledge of principles and practices to broad areas of assignments.
  • Must be capable of devising new approaches to problems encountered.
  • Previous consulting experience preferrd Pipe Stress & Piping Engineer Lead Piping & Stress Engineer: Responsible for technical approval of piping engineering deliverables and running the pipe stress department.
  • Offshore modifications and repair projects on Enquest Thistle Alpha and Heather Alpha platforms, and Talisman Piper Bravo and Tartan platforms.
  • North Sea (UKCS) brownfield topsides].
  • Enquest Thistle Alpha Late Life Extension (LLX) Project: WBS 10 - De-bottlenecking of Produced Water System: Pipework upgrades and separation improvements to Produced water and Ballast Water Skimmer Tanks and Flotation Cells.
  • Installation of new 36" skimmed oil collection header.
  • WBS 10 - Vent: Replacement of 18" H2S Hydrocarbon vent line from skimmer tanks to flare stack.
  • WBS 13 - Hot Water Project: Installation of 12" heater pipework from re-circ pumps to new heater.
  • WBS 15 - Installation of new desalination/reverse osmosis unit and associated Potable water pipework.
  • TH12164 - Well 53 Slot 60 Water Injection Flowline: Installation of new water injection flowline.
  • WBS 16 - Firewater: Installation of new 12" Cu-Ni firewater ringmain and deluge pipework.
Jacobs Engineering Group Inc. - LEAD PIPE Material Engineer/ Pipe Stress Engineer
Reston, VA, 01/2012 - 01/2014
  • Supervised and established piping specification and ensured that codes and standards are met.
  • Set up Smart Plant Materials Reference Database for all company projects.
  • Supervised Stress analyzed of critical piping systems for the complete plant.
  • Mentored, supervised, and assigned work to a team of piping material engineers Supervision of staff members and leads as overall lead and manage job cost accounting, manpower planning, estimating, change notice submittals, Produced and piping material and valve specifications and input into RDB/PDS Check the review of bid tabulations on quotations received.
  • Extensive experience in gathering information to perform technical bid evaluations.
  • Check calculations made by other piping spec engineers and Stress Engineer.
Wood Plc - Senior Piping Engineer
, , 09/2011 - 10/2012
  • 1 year 2 months)Baku, Azerbaijan Responsible (Lead) Piping Engineer for the Sangachal Shah Deniz Replacement LP and HP Flare TAR Tie-in Project, as part of BP-Amec integrated design team (ECMS Project): Performed the piping acoustic fatigue (AIV) assessment on LP and HP flare systems, for pipework local to pressure relieving devices (acoustic sources).
  • Likelihood of failure, L.O.F., was calculated in accordance with Energy Institute (EI) guidelines and BP guidance note GN 44-005.
  • Additional assessment also done using Eisinger / Carucci / Mueller method.
  • Prepared the piping estimate for the project based on the engineering norms in the Amec CTRG / CTRM system.
  • Reporting project piping progress using Amec CTRG / CTRM system.
  • Allocation of timesheet codes to piping team.
  • Lead a team of piping designers and engineers on the project.
  • Developed the pipe stress layout, using Caesar 5.20 to ASME B31.3, of 26" and 30" LP flare lines (-46ºC to +80ºC / FV to 10 Barg LTCS), and 10" and 40" (-110ºC to 80ºC / FV to 15 Barg SS) at flare control stations.
  • Analysis included seismic and blast loads, imposed deflections along existing and new pipe racks, and substantial foundation settlement.
  • Checked Procurement Requisitions, created using Amec PaMMs system, for piping bulks, valves, pipe supports, weld purge bags, and flange testers used on the project Prepared/checked SP Item data sheets for 30" & 40" 45º laterals.
  • Technical bid evaluations and vendor data review.
  • Engineering checking and approval of piping isometrics.
  • Prepared the pipe stress basis of design for the project.
  • Engineering checker of the flow induced fatigue (FIV) assessment for various small bore topside flow lines.
  • Likelihood of failure, L.O.F., was calculated in accordance with Energy Institute (EI) Guidelines.
  • A number of lines required additional support to increase the system natural frequency (stiffness) in order to reduce the L.O.F.
  • value to within allowables.
  • Open)1 recommendation Roger Lee principle piping engineer at Amec Foster Wheeler Anthony's ability far surpasses his youth and has proved himself on many ocassions during the lifespan of the 2012 Turn Around work at the Sangachal teminal in Azerbaijan.
  • His diligence and high quality work was carried out with utter...View.
Dow Chemical Company - Lead / Senior Piping Engineer
Louisville, , Canada 01/2011 - 01/2011
  • SAGD Plant for Conoco Phillip Alberta Canada.
  • Key contributor to the 4 Billion Oil Sand Projects.
  • Supervised, advised, and mentored junior engineers as well as assigned work to team of 4 piping engineers which increased efficiency of the department.
  • Analyzed and designed piping using Caesar II and visually checked and approved piping isometric.
  • Improved lagging isometric production, bringing it within goals.
Jacobs Engineering Group Inc. - Piping Engineer
, , 09/2010 - 09/2011
  • 1 year 1 month)Abu Dhabi, United Arab Emirates Please see the letter of recommendation at bottom of page for my time at WP Abu Dhabi) Responsible for the development and implementation of company standards and procedures for WorleyParsons Abu Dhabi office: Custodian of office engineering standard drawings and procedures.
  • Developed office pipe stress analysis design guides for onshore piping and offshore fixed platforms.
  • Implemented a full set of standard pipe support drawings.
  • Implemented standard piping drawings for line blanks, bleed rings, orifice flanges, branch reinforcement, small bore bracing.
  • Produced calculations for the validation of standard piping drawings.
  • BP Iraq - Rumaila Oil Fields, Southern Iraq.
  • Replacement of underground Crude Oil pipelines at Central Rumaila, Janubia, Shamiyah and Qurainat Degassing Stations: Took a lead role on the project under the direction of the Chief Piping Engineer.
  • Developed piping and valves specification for BP Iraq project c/w material classes and valve datasheets.
  • Piping material classes were to NACE MR0175 for wet sour service covering ASME Classes 150 to 2500.
  • Pipe wall thickness, bolt length and blank design calculations.
  • Actively involved in the procurement of pipework and manual valves required for the project, with the cost of valves in excess of $2 million.
  • Preparation of material requisitions, technical bid evaluations and vendor data reviews.
  • Preparation of pipe stress analysis basis of design document for BP Iraq project.
  • Responsible for pipe routing and layout design, including pipe flexibility.
  • Pipe stress analysis of various crude oil systems using CAESAR II to ASME B31.3.
  • Design of pipe supports, utilising corporate pipe support standards and designing project-specific pipe supports, c/w validating pipe support calculations.
Hdr, Inc. - Senior Pipe Stress Engineer
Gig Harbor, , United Kingdom 08/2010 - 09/2010
  • Senior Pipe Stress Engineer on the HALES Evaporator D Project - Sellafield Nuclear Decommissioning Site:.
  • Transferred directly to Costain office to continue working on Evap D project, following 7 months previous work on Evap D via WorleyParsons/Mott MacDonald:.
  • Performing dynamic seismic response spectra analysis using CAESAR II.
  • Analysis of Highly Active Build 1 systems (ASME B31.3 Category M).
Rbi Solar - Senior Pipe Stress Engineer
, , 02/2010 - 08/2010
  • 7 months)Manchester and Teesside, United Kingdom On secondment to Mott MacDonald from WorleyParsons: Senior Pipe Stress Engineer on the HALES Evaporator D Project - Sellafield Nuclear Decommissioning Site.
  • Client: Costain) Duties:- Seismic Qualification of steam utility systems, designed to seismic S2 Category (to remain in operation during and after a seismic event).
  • Performing dynamic seismic response spectra analysis using CAESAR II to ASME B31.3.
  • Spirax Sarco - Enniskillen Hospital Steam System: Deputising as the Lead Pipe Stress/Project Engineer for the project, was successful in delivering the project early and within budget.
  • Duties included:- Responsible for leading all pipe stress activities on the project.
  • Pipe Stress analysis using CAESAR II v 5.20 to ASME B31.3.
  • Evaluation of nozzle loads on Biomass and Oil-Fired Boilers, calorifiers, and heat exchangers.
  • Client Liaison.
  • Open)1 recommendation Alan W Poad Lead Stress Engineer at WorleyParsons Anthony is an excellent worker who is very meticulous at all times in his job and can work unsupervised.
  • He is quick to learn new skills which has enabled him to become an accomplished Stress Engineer over the number of years he has been in this...View.
Doosan Babcock - Senior Piping Engineer
, , United Kingdom 03/2009 - 02/2010
  • Separation Area Ventilation Project.
  • Sellafield Nuclear Decommissioning Site.
CANADIAN NATURAL RESOURCES - Senior Piping Material ENGINEER
City, , Canada 01/2005 - 01/2011
  • 11 Billion Horizon Oil Sand Plant, Alberta.
  • Canada Key contributor for piping material and valve specifications and input into RDB/PDS Reviewed EPC Contractor's piping designs and piping material specification for pipe racks modules and utilities, providing key stakeholders with valuable data for decision making.
  • Reviewed company piping specifications for compliance.
  • Monitored and reviewed Contractor's piping engineering effort Provided piping and valves specification, Start-up, and commissioning support.
  • Coordinated engineering aspects of project to ensure technical objectives were met within approved scope.
  • Modified engineering for operating plant.
  • Stress .analyzed of critical piping systems for the operating plant.
  • Managed instrument, mechanical and rotating engineer for upgrading Plant.
  • Additional employment going back to 1979 FLUOR, STANTEC, SNC, Alberta, Canada Lead Mechanical/ Pipe Stress Engineer.
Day & Zimmermann - Piping Engineer
, , United Kingdom 01/2004 - 03/2009
  • Part of a two-man stress department responsible for carrying out all of Day & Zimmermann's pipe stress requirements within the UK and Northern Ireland: SembCorp Utilities UK - Project Elm Stress analysis of IP & HP steam systems from new Elm CHP Plant, to the existing Wilton Site steam grid (PED category III systems).
  • Axiom - ConocoPhillips Petroleum Company UK, North Tees Site Stress Analysis of the existing Boiler Plant HP Steam network using Caesar II to the BS 806 Piping Code.
  • Ineos Chlor - CMs Regeneration Project Analysis of PTFE lined pipe for the Hydrochloric acid service.
  • Sembcorp - Ensus Project Analysis of IP steam line supplying Ensus Bio-ethanol facility on Wilton.
  • Stress analysis of gas pipeline to ASME B31.8, for both above ground and buried installations.
  • Sembcorp UK - Boiler Island Stress analysis of LP Steam & IP Steam systems to the new Boiler Island Plant.
  • Huntsman Tioxide Greatham - Deaerator Project Analysis of pipework connecting to the new Deaerator being installed at the Greatham Site.
  • Eastman Chemicals Ectona - Filter Tow Plant, Workington Analysis of Hydrogen Gas, Glycol, Acetone Vapour, Slop Water, LP Steam and Cooling Water systems.
  • Huntsman Tioxide Greatham - Project Titan - Uprate of Icon 1 & Icon 2 Primary Cooler Systems.
  • Analysis of refractory-lined pipework constructed of exotic Nickel 200 (99% Nickel), for containment of 900ºC chlorine gas/titanium tetrachloride/sand mixture.
  • Advansa UK - T8 Mother Liquor Filter Project (MFL) Analysis of Mother Liquor filtration pipework, Solvent Slurry, Acetate Flush, and Degasser pipework for the installation of the new Mother Liquor Filtration plant on T8 at Wilton Site.
  • DuPont Maydown, Northern Ireland - Kevlar & Lycra Projects Analysis of chilled water and steam systems, ASP Gas, Yarn Lycra, Glycol and cooling water systems.
  • DuPont Maydown, Northern Ireland - Tar Still Project Analysis of the tar still reboiler purge system.
Day & Zimmermann - Piping Designer / Junior Engineer
, , United Kingdom 09/1998 - 01/2004
  • Based on site at the DuPont NYLON Intermediates Petrochemical complex, Wilton Site.
  • Responsibilities included frequent site surveys, producing piping studies, general arrangement drawings, construction Isometrics, pipe support detailing, system isometrics, stress isometrics, pressure vessel & saddle support drawings.
  • This role required extensive use of AutoCAD.
- Lead Piping and Pipe Stress Engineer
, , -
  • I have 30 years' experience in EPC as Lead Piping Stress engineer for large scale industrial plants: LNG, NGL ASU, Cryogenic Refinery/Petrochemical, Power Oil and Gas Performed detailed piping stress calculations using CAESAR II and specified standard pipe support and checked integral attachment.
  • Designed special pipe supports Checked pipe stress nozzle loads, pipe support and pipe displacements against the allowable and limits Created Piping specification development for the Project.
  • Reviewed and checked P&ID, piping ISOs and piping GA drawings for compliance to piping specification and valve specification.
NA - Lead Mechanical Engineer/Lead Pipe Stress Engineer/ Pipe Stress Engineer AMEC, Lead, Piping Engineer/ Piping Material Engineer
, , -
SNC Canada - Lead pipe stress/ Piping material engineer
, , -
Delta Hudson / Jacobs - Senior pipe stress engineer
, , -
- Senior Mechanical Engineer
, , -
  • North Atlantic Refinery, Supervisor Maintenance Engineering Group/ Piping Material.
Black And Veatch - Senior Mechanical/ Civil Engineer Polysar/Nova/Bayer Senior Mechanical/ Maintenance Engineer
, , -
NA - PROFESSIONAL ENGINEER
City, STATE, -
  • P.E) and (P.Eng).
  • USA: - Michigan (1XXX), Texas (2014).
  • Alaska (2014), Louisiana (2015).
  • Canada: - Ontario (1975), Alberta (2000), British Colombia (2013).
- Lead Pipe Stress Engineer
, , -
  • responsible for technical approval and delivery of the following offshore oil & gas pipe stress projects: Replacement 18"NS sour gas vent from produced water skimmer tanks to flare stack on Enquest Thistle Alpha.
  • Replacement SDSS 14" produced water line from Degasser to JC13 PW dump caisson & new 8" LTCS anti-siphon/exhaust vent line on Talisman Piper Bravo.
  • Stress analysis of Well 53- Slot 60 water injection flowline on EnQuest Thistle Alpha.
  • Stress analysis of 18" produced water lines from skimmer tanks to flotation cells on Enquest Thistle Alpha.
  • Pipe stress analysis of 14"/12"NS CuNi 90/10 firewater ring main - Thistle Alpha.
  • Stress analysis of 16"NS CuNi 90/10 firewater line from suction caisson - Talisman Piper Bravo Platform.
  • Various modification projects to LP, IP and HP steam utility piping systems for SembCorp Utilities (onshore).
- Lead Piping Engineer
, , -
  • Pipe stress analysis of active effluent pipework, using both PSA5 & CAESAR II to ASME B31.3.
  • Responsible for pipe routing and layout, flexibility, and specification of support types and locations.
  • Production of Pipework, Valve & Pipe Support Procurement specifications.
  • Checking of Ductwork Loading Calculations Preparation of piping estimates, reporting progress, liaison with project management, delivery lead, and client.
  • Open)1 recommendation Andrew Weighell Pipe Stress / Piping Engineer at VWS Westgarth Anthony has all the attributes of a Piping Engineer.
  • He has a genuine interest in his subject.
  • He is knowledgeable and is exceptionally keen to maintain it that way.
  • Piping Engineering is an exceptionally wide and challenging subject.
  • Piping...View.
Affiliations
Skills
3D, acid, Alpha, API, ASP, AutoCAD, Boilers, budget, C, CMs, consulting, cost accounting, Client, clients, Client Liaison, Database, decision making, delivery, designing, direction, Engineer, estimating, drawing, HP, instruction, IP, layout, layout design, leadership, marketing, market, Materials, material selection, Mechanical, Mentoring, office, 2000, Micro station, natural, Natural Gas, network, Oil, page, personnel, problem solving skills, processes, Procurement, producing, progress, project design, Project Analysis, project management, quality, quick, reporting, routing, Shell, Testing Software, specification, Supervisor, Supervision, surveys, Talisman, upgrades, upgrading, Utilities, validation, Ventilation, verbal communication skills, View, weld, welding, WP, Excellent written

By clicking Customize This Resume, you agree to our Terms of Use and Privacy Policy

Disclaimer

Resumes, and other information uploaded or provided by the user, are considered User Content governed by our Terms & Conditions. As such, it is not owned by us, and it is the user who retains ownership over such content.

How this resume score
could be improved?

Many factors go into creating a strong resume. Here are a few tweaks that could improve the score of this resume:

64Fair

resume Strength

  • Length
  • Personalization
  • Strong Summary
  • Target Job

Resume Overview

School Attended

    Job Titles Held:

    • Senior Piping and Material Engineer
    • Lead Principal Piping /Material Engineer
    • Sr. Piping Engineer
    • LEAD PIPE Material Engineer/ Pipe Stress Engineer
    • Senior Piping Engineer
    • Lead / Senior Piping Engineer
    • Piping Engineer
    • Senior Pipe Stress Engineer
    • Senior Pipe Stress Engineer
    • Senior Piping Engineer
    • Senior Piping Material ENGINEER
    • Piping Engineer
    • Piping Designer / Junior Engineer
    • Lead Piping and Pipe Stress Engineer
    • Lead Mechanical Engineer/Lead Pipe Stress Engineer/ Pipe Stress Engineer AMEC, Lead, Piping Engineer/ Piping Material Engineer
    • Lead pipe stress/ Piping material engineer
    • Senior pipe stress engineer
    • Senior Mechanical Engineer
    • Senior Mechanical/ Civil Engineer Polysar/Nova/Bayer Senior Mechanical/ Maintenance Engineer
    • PROFESSIONAL ENGINEER
    • Lead Pipe Stress Engineer
    • Lead Piping Engineer

    Degrees

      By clicking Customize This Resume, you agree to our Terms of Use and Privacy Policy

      *As seen in: