Livecareer-Resume
Jessica Claire
  • Montgomery Street, San Francisco, CA 94105
  • Home: (555) 432-1000
  • Cell:
  • resumesample@example.com
Professional Summary
Job Type: Permanent Work Schedule: Full-Time Desired locations: Asheville, North Carolina
Core Qualifications
  • Guest services
  • Inventory control procedures
  • Merchandising expertise
  • Loss prevention
  • Cash register operations
  • Product promotions
Experience
Security Tech, 03/2011 to Current
New SeasonWalls, MS, United States
  • Salary: 36,000.00 USD Per Year Hours per week: 40 Worked for the Smithsonian Installing all new security and maintaining their systems.
  • Installed CCTV control rooms and sever rooms for new CCTV systems.
  • Ran conduit for new installs ran wire including 22- 16 gauge wire Cat 6 cable(network cable) trained in c-cure 800 Worked with American Dynamics Trained in C*Cure 800/8000 Used R-8 boards (Relay Boards) Used I-8 Boards (Input Boards) Troubled shot different problems.
  • Used multi-meter Used many different tools to install a new set up for a door Drilled through wood doors to get wire to electric locks with internal request to exit triggers Supervisor: Daniel Johnson (2025538307) Okay to contact this Supervisor: Yes
, 01/2010 to Current
Bickford Senior Living, ,
  • Hours per week: 9 Series: 0001 Pay Plan: AA Exhibits Volunteer (This is a federal job Have volunteered since 2009 and have worked with the exhibits design and production staff to maintain and build new exhibits.
  • Built Helicopter stand for the Roseburg helicopter using stick welding and using blueprints for materials and layout.
  • Assisted in lighting exhibits and focusing on the certain exhibits Used blueprints to build and layout exhibits.
  • Used milling machine with aluminum, stainless steel to build new replacement parts for existing interactive and for new interactive.
  • Anchored cases to the floor using a hammer drill.
  • Worked in the meatal shop with other colleague's constructing aluminum railing for new exhibits.
  • Used TIG Welding to make stand offs for graphic panels to stand off the wall.
  • Built new walls and installing them.
  • Know how to put up drywall and the procedures for finishing drywall using joint compound and drywall tape.
  • Have used many types of power tools and hand tools as followed gas nail guns jig saws hand saws chop saws panel saws belt sanders palm sander screw guns wrench's Supervisor: Robert Claire (202-633-2456) Okay to contact this Supervisor: Yes.
Helper, 06/2003 to 09/2004
, ,
  • Hours per week: 30 Built new walls to hang drywall with metal and wood studs Drywall work Helped patch and repair damaged drywall Have helped install trim work.
  • Has hung drywall Helped finish walls by blocking and sanding walls down for paint Installed meatal lath for cement purging for stone work Assisted in installing new roofs on new homes.
  • Assisted in running wire for electrical to be installed throughout a new home Assisted in installing new light fixtures Assisted installing house wrap for siding to be installed.
  • Assisted in installing new windows Assisted in installing new doors in home and if needed shimmed the frame so it was level.
  • Assisted in with installing new cabinets in home.
  • Assisted in finishing off oak stairs for a clear coat and a stain finish.
  • Have assisted with installing new hardwood flooring.
Education
High School: , Expected in
Some College - La Plata, MD
GPA:
Professional Affiliations

Smithsonian Volunteer January 2009- April 2011

Accomplishments
  • Tungsten Inert Gas (TIG) Milling and Lathes Machine CAD Assist other Colleague's with Re-building Interactive.
  • Assist other Colleague's with lighting exhibits Used hammer drill to anchor exhibits to the floor Built a helicopter stand using stick welding Assisted in lighting exhibits Built cases for exhibits used milling machine with different types of metal for new interactive anchored cases to the floor using a hammer drill.
  • Worked in the metals shop with other colleague's constructing railing for exhibits.
  • Used TIG Welding to make stand offs for graphic panels to stand off the wall.
  • Have done Layouts for new exhibits Used Panel Saws Have used many types of power tools such as routers, planers, chop saws, handsaws, grinders, sanders, plasma cuter.
  • Helped build walls for new exhibits.
  • Have done Dry wall work with joint compound.
  • Help with maintain on interactive helped paint new exhibits Helped do A.V work with setting up monitors and interactive.
  • Rebuilt Tac table in Gallery 113 on the East end of the national air and space museum.
  • Helped A.V put lighting tracks.
  • Have had the two hour awareness training for ACM work.
  • Have done electrical work with installing new interactive exhibits.
  • Have had lift training.
  • Bobcat Training.
  • Large Equipment.
  • Have laid carpet tiles Have put up Vinyl lettering on temporary walls.
Skills
C, cable, doors, frame, graphic, hand tools, layout, lighting, materials, windows, multi-meter, network, paint, power tools, Supervisor, TIG, Welding

By clicking Customize This Resume, you agree to our Terms of Use and Privacy Policy

Disclaimer

Resumes, and other information uploaded or provided by the user, are considered User Content governed by our Terms & Conditions. As such, it is not owned by us, and it is the user who retains ownership over such content.

How this resume score
could be improved?

Many factors go into creating a strong resume. Here are a few tweaks that could improve the score of this resume:

62Fair

resume Strength

  • Personalization
  • Target Job

Resume Overview

School Attended

  • Some College

Job Titles Held:

  • Security Tech
  • Helper

Degrees

  • High School

By clicking Customize This Resume, you agree to our Terms of Use and Privacy Policy

*As seen in: