Montgomery Street, San Francisco, CA94105(555) 432-1000, resumesample@example.com
Summary
Enthusiastic Pipefitter offering 12 years of experience in fabricating and installing plumbing systems. Sharp and highly trained with a desire to work within the industrial sector.
Skills
Detail Oriented
Decision Making
Problem Solving
Blueprint Reading
Hand and Power Tools
Team Collaboration
Good Personality
Safety First
Responsable
Experience
07/2019 to 12/2020PipefitterMerck & Co., Inc. | Pennsylvania, PA,
Read and interpreted specifications, diagrams and blueprints for job.
Observed safe work rules, including fall protection and PPE.
Handled all responsibilities for piping systems, including fabricating, assembling, installing and maintaining.
Threaded and installed pipe using pipe wrench and dies.
Fabricated and positioned screw pipe, socket weld pipe and stainless steel tubing.
Threaded pipes using specified machinery.
Managed movement of materials and equipment to different job sites.
Performed hydrostatic pressure testing of boilers and pressure vessels.
Drilled and tapped holes for installation of studs.
Utilized welding and soldering equipment to join sheet metal components in compliance with blueprints and job specifications.
Installed and replaced water heaters, drain pipes and water supply lines.
Filled piping systems with water and air to test for leaks.
Installed and repaired gas lines and hot and cold water lines.
Cut openings in walls and floors to accommodate pipe and pipe fittings.
Inspected and tested installed systems to isolate and identify faults.
Carefully inspected worksites to determine presence of any obstructions, unsafe conditions and crew errors.
Installed and inspected new and existing plumbing lines up to 24 inches in diameter.
Cut stainles and carbon steel pipes with sawsall, bandsaw and grinder to prepare pipes for installation.
Hoisted loads using slings, chains, shackles, hooks, cables and other rigging equipment.
Operated torque machinery, pipe wrench and crescent wrench to repair leaks and make adjustments to pipes.
Operated motorized pumps to remove water from flooded manholes, basements and other facility floors.
Installed piping systems for plumbing for both domestic and HVAC lines.
Identified, removed and replaced worn components to maximize system functionality.
Cut and hammered pipes to meet design specifications for individual system installations.
Bored holes into existing structures to install piping to meet new system specifications.
Verified and gathered new measurements with tape meassure to determine proper sizing of piping.
Created and submitted daily reports on progress of all plumbing projects.
06/2018 to 05/2019PipefitterMerck & Co., Inc. | Riverside (Cherokee), PA,
Read and interpreted specifications, diagrams and blueprints for job.
Observed safe work rules, including fall protection and PPE.
Threaded and installed pipe using pipe wrench and dies.
Threaded pipes using specified machinery.
Drilled and tapped holes for installation of studs.
Utilized welding and soldering equipment to join sheet metal components in compliance with blueprints and job specifications.
Installed piping systems for plumbing for both domestic and HVAC lines.
Installed and replaced water heaters, drain pipes and water supply lines.
Filled piping systems with water and air to test for leaks.
Cut openings in walls and floors to accommodate pipe and pipe fittings.
Cut and hammered pipes to meet design specifications for individual system installations.
Installed and inspected new and existing plumbing lines up to 20 inches in diameter.
Cut polyetilen and carbon steel pipes with sawzall and grinder to prepare pipes for installation.
Bored holes into existing structures to install piping to meet new system specifications.
Hoisted loads using slings, chains, shackles, hooks, cables and other rigging equipment.
Operated pipe wrench and crescent wrench to repair leaks and make adjustments to pipes.
Used soldering and welding equipment to assemble carbon steel pipes.
11/2017 to 05/2018Pipefitter Merck & Co., Inc. | Sarasota, FL,
Read and interpreted specifications, diagrams and blueprints for job.
Observed safe work rules, including fall protection and PPE.
Handled all responsibilities for piping systems, including fabricating, assembling, installing and maintaining.
Threaded and installed pipe using pipe wrench and dies.
Fabricated and positioned screw pipe, socket weld pipe and stainless steel tubing.
Threaded pipes using specified machinery.
Performed hydrostatic pressure testing of boilers and pressure vessels.
Drilled and tapped holes for installation of studs.
Utilized welding and soldering equipment to join sheet metal components in compliance with blueprints and job specifications.
Identifying signs of potential problems with boilers and pressure vessels, such as tube leakage, scaling, pitting, metals discoloration and refractory failures.
Installed piping systems for plumbing for both domestic and HVAC lines.
Installed and replaced water heaters, drain pipes and water supply lines.
Filled piping systems with water and air to test for leaks.
Installed and repaired gas lines and hot and cold water lines.
Cut openings in walls and floors to accommodate pipe and pipe fittings.
Connected fire tubes to heads as well as water tubes to drums and headers of boilers.
Inspected and tested installed systems to isolate and identify faults.
Carefully inspected worksites to determine presence of any obstructions, unsafe conditions and crew errors.
Cut and hammered pipes to meet design specifications for individual system installations.
Installed and inspected new and existing plumbing lines up to 20 inches in diameter.
Cut coper and carbon steel pipes with grinder and bandsaw to prepare pipes for installation.
Bored holes into existing structures to install piping to meet new system specifications.
Used soldering and welding equipment to assemble 20 pipes.
Operated motorized pumps to remove water from flooded manholes, basements and other facility floors.
Operated crescent and pipe wrench to repair leaks and make adjustments to pipes.
Hoisted loads using slings, chains, shackles, hooks, cables and other rigging equipment.
07/2015 to 04/2016PipefitterMerck & Co., Inc. | South Dakota, SD,
Read and interpreted specifications, diagrams and blueprints for job.
Handled all responsibilities for piping systems, including fabricating, assembling, installing and maintaining.
Threaded and installed pipe using pipe wrench and dies.
Fabricated and positioned screw pipe, socket weld pipe and stainless steel tubing.
Threaded pipes using specified machinery.
Managed movement of materials and equipment to different job sites.
Performed hydrostatic pressure testing of boilers and pressure vessels.
Drilled and tapped holes for installation of studs.
Utilized welding and soldering equipment to join sheet metal components in compliance with blueprints and job specifications.
Installed piping systems for plumbing for both domestic and HVAC lines.
Connected fire tubes to heads as well as water tubes to drums and headers of boilers.
Installed and replaced water heaters, drain pipes and water supply lines.
Filled piping systems with water and air to test for leaks.
Installed and repaired gas lines and hot and cold water lines.
Cut openings in walls and floors to accommodate pipe and pipe fittings.
Inspected and tested installed systems to isolate and identify faults.
Cut and hammered pipes to meet design specifications for individual system installations.
Installed and inspected new and existing plumbing lines up to 30 inches in diameter.
Cut carbon steel and garvanize pipes with grinder and sawzall to prepare pipes for installation.
Verified and gathered new measurements with tape meassure to determine proper sizing of piping.
Created and submitted daily reports on progress of all plumbing projects.
Hoisted loads using slings, chains, shackles, hooks, cables and other rigging equipment.
Operated pipe wrench and crescent wrench to repair leaks and make adjustments to pipes.
Used soldering and welding equipment to assemble carbon steel pipes.
08/2010 to 05/2013PipefitterMerck & Co., Inc. | Ames (Research Park), IA,
Read and interpreted specifications, diagrams and blueprints for job.
Observed safe work rules, including fall protection and PPE.
Handled all responsibilities for piping systems, including fabricating, assembling, installing and maintaining.
Threaded and installed pipe using pipe wrench and dies.
Fabricated and positioned screw pipe, socket weld pipe and stainless steel tubing.
Threaded pipes using specified machinery.
Managed movement of materials and equipment to different job sites.
Performed hydrostatic pressure testing of boilers and pressure vessels.
Drilled and tapped holes for installation of studs.
Utilized welding and soldering equipment to join sheet metal components in compliance with blueprints and job specifications.
Installed piping systems for plumbing for both domestic and HVAC lines.
Installed and replaced water heaters, drain pipes and water supply lines.
Filled piping systems with water and air to test for leaks.
Installed and repaired gas lines and hot and cold water lines.
Cut openings in walls and floors to accommodate pipe and pipe fittings.
Inspected and tested installed systems to isolate and identify faults.
Communicated with customers regarding recommendations on repairs, replacements and upgrades of plumbing equipment.
Cut and hammered pipes to meet design specifications for individual system installations.
Installed and inspected new and existing plumbing lines up to 20 inches in diameter.
Cut coper, garvanize,aluminum and carbon steel pipes with torch, grinder and bandsaw to prepare pipes for installation.
Bored holes into existing structures to install piping to meet new system specifications.
Verified and gathered new measurements with tape meassure to determine proper sizing of piping.
Hoisted loads using slings, chains, shackles, hooks, cables and other rigging equipment.
Operated crescent wrench and pipe wrench to repair leaks and make adjustments to pipes.
Operated motorized pumps to remove water from flooded manholes, basements and other facility floors.
Modified piping systems with crescent wrench and pipe wrench to perform preventive maintenance activities.
Used soldering and welding equipment to assemble carbon steel pipes.
Education and Training
Expected in 05/2003Associate of Applied Science | Industrial MachiningTechnology College of Guayama , Guayama, PRGPA:
Resumes, and other information uploaded or provided by the user, are considered User Content governed by our Terms & Conditions. As such, it is not owned by us, and it is the user who retains ownership over such content.
How this resume score could be improved?
Many factors go into creating a strong resume. Here are a few tweaks that could improve the score of this resume:
