- , , 100 Montgomery St. 10th Floor
- Home: (555) 432-1000
- Cell:
- resumesample@example.com
Industrious and talented Tradesmen bringing solid background performing skilled fabrication and fitting work. Accurately cut and fabricate components to complete high-quality installations. Decisive and knowledgeable with top-notch technical abilities and project management skills gained during 10-year multi trade career.
- Emergency Services
- Safety Protocols
|
- Detail Oriented
- Conflict Resolution
|
Pipefitter, 01/2015 to 08/2021
Precision Castparts Corporation – Gardena, Irvine,
- Fabricated piping pieces and components in line with design specifications for each system.
- Measured, threaded and cut materials to correct angles.
- Drilled holed into parts of existing structures to complete piping meeting applicable [Type] and [Type] codes.
- Conducted thorough inspects and tests of previously installed systems to locate and correct faults.
- Located and repaired or replaced worn and broken components to enhance system functionality and durability.
- Filled pipe systems with water and air to determine location of leaks.
- Fabricated and installed screw pipe, socket weld pipe and stainless steel tubing.
- Threaded pipes using piping machines.
- Supervised 6 apprentices and offered specific recommendations to improve work quality.
- Utilized welding equipment in mig, tig and stick tools to safely complete predetermined operations .
- Prepared locomotive and train machinery for use and verified presence of sufficient parts to complete operations.
- Inspected work sites to determine presence of obstructions and determined where to cut pipes for structural integrity.
- Expanded trade knowledge by networking with colleagues and participating in courses and seminars.
- Used clamps and brackets to attach pipes to walls, structures and fixtures.
- Requisitioned tools and equipment to select type and size of pipes needed for projects.
- Cut and drilled holes in walls to permit passage of pipes.
- Eliminated risks by correctly identifying potential safety hazards.
- Used pipethreading and other fabrication tools to cut and thread pipes to specifications.
- Appropriately fitted pipes by identifying dimensions, sizes and shapes needed to replace faulty pipes.
- Inspected and testing pipe systems through FRA and Metra to verify safety and reliability.
- Read and interpreted blueprints and schematics to determine locations, quantities and sizes of materials required.
- Tested and operated hydraulic and pneumatic equipment for heating and cooling systems on all locomotives for Western avenue diesel house.
Painter Foremen, 06/2013 to 01/2015
Topbuild – Manassas, VA,
- Painted surfaces using brushes, spray guns and paint rollers.
- Climbed scaffolding, staging, ladders and planks to reach work area surfaces and observed safety protocols to prevent falls.
- Consulted with clients to discuss commission ideas and style preferences to create mutually agreeable project parameters.
- Applied primer, paints, varnishes and lacquers to walls and surfaces using traditional and sprayer methods.
- Prepared surfaces and surrounding areas for painting using sandpaper, tape and other materials.
- Moved painted items to drying racks and finished coated surfaces by baking painted items in oven.
- Painted indoor areas such as hallways, bathrooms and lobbies.
- Obtained correct dimensions and specifications by properly measuring areas.
- Applied putty, wood filler, spackling and caulks to prep uneven surfaces and fill in holes.
- Protected all surfaces from damage and spills by using drop cloths prior to and during painting.
- Bid on projects, prepped sites and completed projects in line with customer specifications and requirements.
- Worked holidays and weekends depending on shifting needs of project.
- Repaired defects in walls including holes and scrapes.
- Mixed and matched paints according to customer specifications.
- Corrected surface imperfections by filling cracks, holes and joints.
- Primed and sealed surfaces to best support paint coats.
- Conducted final work check to assess quality and make corrections if necessary.
- Performed regular preventive maintenance on tools and equipment to support best quality of work.
- Applied paint with cloth, brush, sponge and fingers to create special effects.
- Applied caulk, putty and plaster to walls using correct techniques to achieve professional finishes.
- Interacted with clients to report progress and verify timetable for completed work.
- Trained new staff on initial setup routines and continual work monitoring procedures.
- Achieved optimal adherence by washing, treating and sanding surfaces.
- Calculated accurate amounts of materials and estimated time for planned jobs.
Gutter Installer, 06/2009 to 06/2013
Cedar Fair Entertainment Company – Santa Clara, CA,
- Erected scaffolding and ladders to reach gutter heights.
- Loaded materials onto trucks and logged usage.
- Installed downspouts, elbows and materials in existing and new construction homes.
- Maintained good housekeeping on job site and company truck and kept accurate tool inventory.
- Precisely cut felt, shingles and strips of flashing to fit angles formed by walls, vents and intersecting roof surfaces.
- Coordinated with other craft employees to maximize project efficiency.
- Safely used all tools and equipment to prevent worksite injuries.
- Removed snow, water and debris from roofs prior to applying roofing materials.
- Scheduled and attended pre-planning sessions with general contractors.
- Conducted regular inspections and troubleshot building roofing systems for commercial and residential customers.
Carpenter, 06/2006 to 06/2008
Wise Old Owl Woodworks – City, STATE,
- Checked measurements and completed accurate cuts to prevent materials waste and maintain cost controls.
- Monitored tool and equipment condition and arranged repairs as needed.
- Planned and executed work with proper tools and materials to maximize productivity.
- Completed precise joining and high-quality finish work by properly anchoring and bracing structures.
- Followed established job site safety regulations and maintained safe and clean work area.
- Completed installations of building structures, trim, flooring and cabinetry.
- Placed building paper over subflooring to protect final flooring material from water damage.
- Led garages, residential homes and addition projects to completion.
- Followed protocols and stayed organized to provide personal and teammate safety.
- Measured and marked cutting lines on materials using pencil or chalk and marking gauge.
- Cut and installed insulation for residential and commercial buildings.
- Installed interior doors and hardware, accessories, cubicle curtain tracks and TV brackets.
- Proactively managed projects to obtain 100% customer satisfaction for all custom work.
- Fabricated custom furniture, shelving and cabinets and installed in specified locations.
- Calculated dimensions and amount of needed materials by accurately measuring job site and structures.
- Constructed numerous custom built designs according to specifications.
- Effectively used all fasteners such as nails, screws, pneumatic nailing systems, concrete anchors, powder-actuated fasteners and framing connectors.
- Completed all tasks according to technical document requirements and specifications to work with accuracy.
- Developed proficiency in stain-grade trim work, hanging doors and drilling and setting door hardware.
- Kept team members safe and job sites free of hazards by maintaining good organizational skills at all stages.
- Shaped or cut materials to specified measurements using hand tools, machines and power saws.
- Met with clients to set out project goals, scope and requirements and drafted blueprints for review and final approval.
- Installed drywall, ceilings, trim and fabricated replacement trim and moldings.
- Facilitated harmonious working relationships with crew members to prevent problems and conflicts.
- Repaired and remodeled wood, iron, chain link and vinyl fencing.
- Safely operated electric cordless and hammer drills and cutting torches.
- Specialized in foundations, framing and finish carpentry.
- Aligned and squared frames and forms for installation.
- Built and hung custom doors and frames.
Associate of Arts: , Expected in 06/2011
College of Dupage - Glen Ellyn,
GPA:
High School Diploma: , Expected in 06/2007
Lake Park Highschool - Roselle, IL,
GPA:
Resumes, and other information uploaded or provided by the user, are considered User Content governed by our Terms & Conditions. As such, it is not owned by us, and it is the user who retains ownership over such content.
How this resume score
could be improved?
Many factors go into creating a strong resume. Here are a few tweaks that could improve the score of this resume:
- Formatting
- Personalization
- Strong Summary
- Target Job
- Word Choice