Livecareer-Resume
Jessica Claire
  • Montgomery Street, San Francisco, CA 94105
  • H: (555) 432-1000
  • C:
  • resumesample@example.com
  • Date of Birth:
  • India:
  • :
  • single:
Summary
Jessica Claire Welder oriented veteran welder with 13 years experience. Effective communication skills and team player. Specialized in stick and MiG welding. Knowledge in reading blueprints and schematics. Ensuring adherence to all safety policies and procedures. Maintenance repair and fabrication on heavy equipment. Help us match you with your next job Desired Job Title Welder/Fabricator Desired Job Types Full-time
Skills
  • OSHA Certified
  • Expert in stick welding
  • Reading drawings, models and blueprints
  • Flux core (FCAW) welding
  • Sheet metal fabrication
  • AWS certified
  • Available to work nights and weekends
  • Gas metal arc welding
  • Shielded metal arc welding
  •  Accurate measurements and estimates
  • Troubleshooting
  • Dependable independent worker
  • Customer service skills
  • Good at following instructions
  • Solid independent worker
  • Basic math skills
  • Available to work nights and weekends
  •  Expert knowledge of 0.35 to 3/32 wiring
  • OSHA regulatory compliance
  • Strong work ethic
  • Production line/assembly line forklift experience
  • Proficiency with mechanical and electric tools



Accomplishments
Equipment Maintenance
    • Construction:
    • maintenance on all types and sizes of heavy equipment
    • repair of cutting edges, blades, buckets, and tracks on all types and sizes of bulldozer, excavators, mini excavators, backhoes
    • Deep knowledge of sheet metal and welding techniques, fabrication, installation and codes and regulations.
    • Met company standard times and individual productivity goals.
    • Equipment MaintenancePerformed routine maintenance on equipment on as-needed basis
    •  
    •  
    •  
    •  

       

    Experience
    welder/fitter, 06/2016 - 08/2016
    City Of Jacksonville, Fl Jacksonville, FL,
    • Observed safety practices and procedures to maintain a safe and clean work environment. Observed safety practices and procedures to maintain a safe and clean work environment.
    • Maintained and repaired equipment and facilities.
    • Troubleshot, repaired and serviced hand tools, power tools and other machining equipment.
    • Met company standard times and individual productivity goals consistently.
    • Cut, shaped, and bent metal plates, sheets, tubes and structures.
    • Analyzed all required blueprints, drawings, work orders and sketches to correctly fabricate and install products and parts.
    • Trimmed, filed, ground, buffed and smoothed surfaces, seams and joints of assembled parts.
    • Repaired, modified and maintained equipment.
    • Interpreted blueprints, drawings, and written and verbal instructions to set up jobs. 
    • .Completed all repairs and maintenance work to company standards.
    • Planned work and determined appropriate tools and equipment.
    • Reduced downtime during production by maintaining equipment and reducing unnecessary maintenance.
    • Used hand tools to mount, install, and secure tools.
    • Worked overtime, including evenings and weekends, to respond to emergencies and fix unsafe conditions.
    • Managed work with little supervision.
    • Notified supervisors of faulty operations and defective materials.
    • Cut, fit, and welded metal components, including plate, structural shapes, and pipe.
    • Laid out, fitted and fabricated metal components.
    • Combined welding techniques, knowledge of metallurgy and engineering requirements to produce quality work.
    • Inspected grooves, angles and gap allowances with micrometer, caliper and precision measuring instruments.
    • Heated, formed and dressed metal parts with hand tools, torch and arc welding equipment.
    • Operated manual and semi-automatic welding equipment to fuse metal segments together.
    • Monitored the fitting, burning and welding processes to avoid overheating parts, warping, shrinking, distortion and expansion of materials.
    • Set up equipment and welded parts according to welding chart specifications and type.
    • Repaired and maintained heavy-duty and construction machinery.
    • Responded to service calls quickly and professionally.
    • Completed minor torch ups with MIG welders.
    • Followed all safety guidelines, including proper machine guarding and lockout and tagout procedures.
    • Application of electrode and gun along weld line to create precision pieces.
    • Adjusted the weld machines to the correct settings prior to weld applications.
    • Cleaned and degreased weld joints and workpieces efficiently.
    • Prepared broken parts for welding by properly grooving and scarfing surfaces.
    • Positioned and clamped workpieces together and properly assembled them in jigs and fixtures. 
    • Inspected chains, hammers and other tools for damage or wear to prevent injuries and accidents. Precision cutting with power saws, hand shears and chipping knives. 
    • Laid out, positioned, aligned and secured parts and assemblies with straightedges and combination square sand calipers.
    • Installed fabricated metal components in the processing plant. 
    • Dismantled and assembled welding equipment.
    fabricator/electricians helper, 04/2014 - 11/2014
    City Of Jacksonville, Fl Jacksonville, FL,
    • Laid out, fitted and fabricated metal components.
    • Combined welding techniques, knowledge of metallurgy and engineering requirements to produce quality work.
    • Inspected grooves, angles and gap allowances with micrometer, caliper and precision measuring instruments.
    • Heated, formed and dressed metal parts with hand tools, torch and arc welding equipment.
    • Operated manual and semi-automatic welding equipment to fuse metal segments together.
    • Monitored the fitting, burning and welding processes to avoid overheating parts, warping, shrinking, distortion and expansion of materials.
    • Adjusted the weld machines to the correct settings prior to weld applications.
    • Cleaned and degreased weld joints and workpieces efficiently.
    • Prepared broken parts for welding by properly grooving and scarfing surfaces.
    • Troubleshoot electrical/electronic control circuits.
    • Worked on projects, which provided value to the department, the company, and the client base.
    • Installed safety systems, including emergency lighting, uninterruptible power systems and battery systems.
    • Tested the entire electrical assembly for performance levels and safety concerns.
    • Performed electrical utility services for industrial based and new building projects. 
    • .Consistently worked to code on all projects, utilizing drawings and manuals.
    • Connected wires to circuit breakers and transformers.
    • Built and disassembled scaffolds, bracing and barricades.
    • Assisted skilled workers with construction projects in all phases of rough and finish carpentry.
    • Cleaned all construction areas to avoid hazards.
    • Mentored junior team members, providing guidance on proper techniques and safety.
    • Continually cleaned work areas and equipment.
    • Arranged and stored materials, machines, tools and equipment.
    • Cut materials to specified sizes for installation using power saws and tile cutters.
    • Transported materials, tools and machines to installation sites.
    • Assisted large crews in erecting, repairing and the wrecking of buildings and bridges.
    Welder, 04/2007 - 04/2009
    Mcnichols Company Cerritos, CA,
    • Authorized to work in the US for any employer Weld components in flat, vertical, or overhead positions.
    • Arranged and stored materials, machines, tools and equipment.
    • Transported materials, tools and machines to installation sites.
    • Observed safety practices and procedures to maintain a safe and clean work environment.
    • Maintained and repaired equipment and facilities.
    • Met company standard times and individual productivity goals consistently.
    • Cut, shaped, and bent metal plates, sheets, tubes and structures.
    • Analyzed all required blueprints, drawings, work orders and sketches to correctly fabricate and install products and parts.
    • Repaired, modified and maintained equipment.
    • Interpreted blueprints, drawings, and written and verbal instructions to set up jobs.
    • Used measuring instruments to inspect parts.
    • Worked overtime, including evenings and weekends, to respond to emergencies and fix unsafe conditions.
    • Cut, fit, and welded metal components, including plate, structural shapes, and pipe.
    • Laid out, fitted and fabricated metal components.
    • Combined welding techniques, knowledge of metallurgy and engineering requirements to produce quality work.
    • Inspected grooves, angles and gap allowances with micrometer, caliper and precision measuring instruments.
    • Heated, formed and dressed metal parts with hand tools, torch and arc welding equipment.
    • Laid out, positioned, aligned and secured parts and assemblies with straightedges and combination square sand calipers.
    • Set up equipment and welded parts according to welding chart specifications and type.
    • Repaired and maintained heavy-duty and construction machinery.
    • Prepared broken parts for welding by properly grooving and scarfing surfaces.
    • Positioned and clamped workpieces together and properly assembled them in jigs and fixtures.


    Welder, 06/2006 - 03/2007
    Seal Arc Welding City, STATE,
    • Welded and fabricated steel structures throughout plant.
    • Inspected chains, hammers and other tools for damage or wear to prevent injuries and accidents.
    • Adjusted the weld machines to the correct settings prior to weld applications.
    • Application of electrode and gun along weld line to create precision pieces.
    • Followed all safety guidelines, including proper machine guarding and lockout and tagout procedures.
    • Completed minor torch ups with MIG welders.
    • Dismantled and assembled welding equipment.
    • Monitored the fitting, burning and welding processes to avoid overheating parts, warping, shrinking, distortion and expansion of materials.
    • Operated manual and semi-automatic welding equipment to fuse metal segments together.
    • Heated, formed and dressed metal parts with hand tools, torch and arc welding equipment.
    • Combined welding techniques, knowledge of metallurgy and engineering requirements to produce quality work.
    • Accurately read blueprints and repair manuals to identify mechanical problems and fix them.
    • Planned work and determined appropriate tools and equipment.
    • Processed work orders and prioritized jobs.
    • Responsible for promoting safe and clean working environment.
    • Used hand tools to mount, install, and secure tools.
    • Used measuring instruments to inspect parts.
    • Verified that machine setups conformed to specs.
    • Worked overtime, including evenings and weekends, to respond to emergencies and fix unsafe conditions.
    • Reviewed project drawings to perform installation activities according to specifications.
    • Kept supervisor informed of job progress and material requirements
    • Managed work with little supervision.
    • Performed weekly maintenance assessments.
    • Observed safety practices and procedures to maintain a safe and clean work environment.
    • Maintained and repaired equipment and facilities.
    • Troubleshot, repaired and serviced hand tools, power tools and other machining equipment.
    • Met company standard times and individual productivity goals consistently.
    • Measured work piece dimensions to determine machine operation accuracy.
    • Accurately selected gauges and types of sheet metal and non-metallic material.
    • Built and disassembled scaffolds, bracing and barricades.
    • Cleaned all construction areas to avoid hazards.
    • Continually cleaned work areas and equipment.
    • Transported materials, tools and machines to installation sites.
    Welder, Fabricator, 05/2005 - 05/2006
    Hydro Fab City, STATE,
    • Welded and fabricated portable well drilling machines.
    • Continually cleaned work areas and equipment.
    • Arranged and stored materials, machines, tools and equipment.
    • Cut materials to specified sizes for installation using power saws and tile cutters.
    • Observed safety practices and procedures to maintain a safe and clean work environment.
    • Maintained and repaired equipment and facilities.
    • Drilled holes and compared templates to promote quality production.
    • Unloaded and stored raw material deliveries.
    • Met company standard times and individual productivity goals consistently.
    • Analyzed all required blueprints, drawings, work orders and sketches to correctly fabricate and install products and parts.
    • Oiled machines, dies and work pieces and conducted other routine maintenance.
    • Operated drill presses, milling machines, rivet and hardware presses safely and correctly.
    • Maintained strict quality requirements using scales, calipers and micrometers.
    • Interpreted blueprints, drawings, and written and verbal instructions to set up jobs.
    • Laid out, fitted and fabricated metal components.
    • Combined welding techniques, knowledge of metallurgy and engineering requirements to produce quality work.
    • Operated manual and semi-automatic welding equipment to fuse metal segments together.
    • Laid out, positioned, aligned and secured parts and assemblies with straightedges and combination square sand calipers.
    • Set up equipment and welded parts according to welding chart specifications and type.
    • Followed all safety guidelines, including proper machine guarding and lockout and tagout procedures.
    • Positioned and clamped workpieces together and properly assembled them in jigs and fixtures.
    Boatswains mate, 10/1992 - 11/1994
    U. S. Navy City, STATE,
    • e-3 maintained ship readiness by performing maintenance on all department equipment meritorious service medal, humanitarian medal.
    • Coordinated port visits and fleet operations domestically and abroad.
    • Effective decision-maker in high-pressure environments.
    • Patrolled areas and allowed restricted area access for authorized personnel.
    Education and Training
    associates degree: welding/applied mathematics, Expected in 2003
    -
    Southern Union Community College - Opelika, AL
    GPA:
    • Coursework in Arc and MIG Welding
    • 3.8 GPA
    • Coursework in Residential Carpentry, Blueprint Reading and Construction Safety
    • Coursework in Basic Construction Safety and Hand and Power Tools
    • 10 hour OSHA safety certification 
    certificate of completion: welding, Expected in 2012
    -
    J.F. Ingram - Elmore, Alabama
    GPA:
    • Coursework in Basic Construction Safety and Hand and Power Tools
    • Coursework in Arc and MIG Welding
    • 3.8 GPA
    • Certificate in Combination Welding
    Skills
    • forklift operator
    • all construction equipment operator
    • welding, cutting, and fitting knowledge
    • blueprint reading
    Additional Information
    • Awards Add Certifications/Licenses Add welder May 2003 to May 2017 unlimited thickness plate certification; 2G, 3G, & 4G positions

    By clicking Customize This Resume, you agree to our Terms of Use and Privacy Policy

    Disclaimer

    Resumes, and other information uploaded or provided by the user, are considered User Content governed by our Terms & Conditions. As such, it is not owned by us, and it is the user who retains ownership over such content.

    How this resume score
    could be improved?

    Many factors go into creating a strong resume. Here are a few tweaks that could improve the score of this resume:

    67Fair

    resume Strength

    • Personalization
    • Target Job

    Resume Overview

    School Attended

    • Southern Union Community College
    • J.F. Ingram

    Job Titles Held:

    • welder/fitter
    • fabricator/electricians helper
    • Welder
    • Welder
    • Welder, Fabricator
    • Boatswains mate

    Degrees

    • associates degree
    • certificate of completion

    By clicking Customize This Resume, you agree to our Terms of Use and Privacy Policy

    *As seen in: