LiveCareer-Resume

welder fabricator resume example with 11+ years of experience

Jessica Claire
, , 609 Johnson Ave., 49204, Tulsa, OK 100 Montgomery St. 10th Floor
Home: (555) 432-1000 - Cell: - resumesample@example.com - : - -
Summary

Hardworking Welder skilled in MIG, flux and stick welding. Talented at operating drill press and crane. Strong background in welding and metal fabrication. Able to handle continuous physical work in different environments while exceeding standards. Careful to use correct techniques for different types of materials and fits. Expert with wide range of power tools and equipment. Responsible and punctual Welder experienced in interpreting blueprints and drawings to perform tasks. Self-starter skilled in operating heavy equipment, supervising crews and maintaining safety standards. Expert at following procedures and protocols and safely working in enclosed spaces. Enthusiastic Welder committed to exceeding project expectations. Expert in preparing surfaces for welding by removing unwanted materials or grime and setting up proper equipment. Trained in operation and maintenance of related tools. Logical Welder works well with various materials to meet project requirements. Smoothly surfaces and joins components. Background working with steel and alloys. Highly-motivated employee with desire to take on new challenges. Strong worth ethic, adaptability and exceptional interpersonal skills. Adept at working effectively unsupervised and quickly mastering new skills. Hardworking employee with customer service, multitasking and time management abilities. Devoted to giving every customer a positive and memorable experience. Committed job seeker with a history of meeting company needs with consistent and organized practices. Skilled in working under pressure and adapting to new situations and challenges to best enhance the organizational brand.

Skills
  • Sub-Arc Welding
  • Brake Press Operation
  • Stick Welding
  • Design Interpretation
  • Pipe Welding
  • Workpiece Measurements
  • Time Management
  • Overhead Welding Position
  • Torch Selection
  • Torch Installation
  • Filler Rod Selection
  • Welding Techniques
  • Equipment Selection
  • Vertical Welding
  • Cast Iron Metal Welding
  • Mathematical Calculations
  • Attention to Detail
  • Micrometers and Calipers
  • Critical Thinking
  • Workpiece Examinations
  • Power Tools Operation
  • Stainless Steel Metal Welding
  • Flat Welding Position
  • Gas Flow Adjustments
  • Hand and Power Tool Operation
  • Decision Making
  • Brakes and Shears Operation
  • Surface Material Preparation
  • Flux Selection
  • Straightedge Measurements
  • Edge Joining
  • Aluminum Metal Welding
  • Sheet Metal Fabrication
Experience
03/2023 to Current
Welder/ Fabricator In-Terminal Services Wilmington, CA,
  • Read and followed blueprints and weld diagrams.
  • Used jigs, fixtures and tools for assembly of parts and components.
  • Made steel form parts using various cutting equipment and welded part together per specifications.
  • Checked cut length frequently for deviation in cut length specs.
  • Checked angle of pipe on angle table.
  • Welded components in flat, vertical or overhead positions.
  • Welded fabrication materials, continuously checking for safety and quality.
  • Fabricated steel molds for concrete using hand and power tools, welding operations and lifting equipment.
  • Prepared material surfaces for welding by removing scale, rust or other foreign matter.
  • Adjusted weld machines to correct settings for precision and waste reduction.
  • Prepared workpiece edges by grinding, cutting, buffing or bending to verify snug fit.
  • Aligned and clamped workpieces using rules, squares or hand tools.
  • Positioned and clamped workpieces together and properly assembled in jigs and fixtures.
  • Cut, contoured and beveled metal and structural shapes to achieve accurate dimensions.
  • Positioned and secured workpieces using hoists, wire and banding machines or hand tools.
  • Used welding skills to help repair and maintain heavy-duty machinery.
  • Completed minor torch ups with MIG welders.
  • Operated manual and semi-automatic welding equipment to fuse metal segments together.
  • Determined welding strategies using metallurgy knowledge, geometry and welding techniques.
  • Adjusted gas flow and pressure to create and maintain desired flames.
  • Heated and dissolved metal parts to obtain molten substance used in welding or extrusion.
  • Conducted hydrostatic and tolerance tests on welded parts to verify weld quality and conformance to specifications.
  • Conducted x-ray, hydrostatic and tolerance tests on welded parts to verify weld quality and conformance to specification.
  • Marked or tagged material with job number, piece marks and other identifying marks.
  • Melted and applied solder along adjoining edges of workpieces to solder joints.
10/2018 to 10/2022
CDL Driver Republic National Distributing Company Macomb, MI,
  • Communicated with dispatcher to relay and receive information about route changes and delays, quickly adjusting plans to maintain schedules.
  • Kept vehicles in good operating condition with thorough inspections and basic maintenance.
  • Demonstrated safe driving by observing road rules, exercising caution in unfamiliar areas and maintaining vehicle control.
  • Maintained safe driving habits to protect property and general public on roadways.
  • Loaded, balanced and secured product to safely transport goods.
  • Conducted vehicle inspections before and after every trip and performed minor repairs to keep truck functional.
  • Logged driving hours and fuel usage data on time to keep reports current.
  • Coordinated shipping papers, customer documents and daily logs to maintain accurate records.
  • Planned routes using personal knowledge and GPS mapping software to optimize strategies.
  • Planned efficient routes and adjusted strategies based on current weather and traffic information.
  • Updated logs with timely and accurate information meet internal requirements and DOT recordkeeping demands.
  • Established relationships with customers through use of interpersonal, active listening and inquiry response skills.
  • Loaded and unloaded freight, paying special attention to fragile items and carefully security every load for optimal protection and balance.
  • Completed transfers at hubs and final destinations to keep routes on schedule.
  • Managed proper transportation of dangerous goods with no incidents.
  • Inspected truck for defects and safe operating condition before, during and after trips. Perform maintance on semi. Welding or general wrenching
  • Hooked and unhooked trailers from tractor and converter dollies.
  • Maintained telephone and radio contact with supervisor to receive delivery instructions.
04/2008 to 10/2015
CDL Driver Republic National Distributing Company Macon, GA,
  • Communicated with dispatcher to relay and receive information about route changes and delays, quickly adjusting plans to maintain schedules.
  • Kept vehicles in good operating condition with thorough inspections and basic maintenance.
  • Demonstrated safe driving by observing road rules, exercising caution in unfamiliar areas and maintaining vehicle control.
  • Maintained safe driving habits to protect property and general public on roadways.
  • Loaded, balanced and secured product to safely transport goods.
  • Conducted vehicle inspections before and after every trip and performed minor repairs to keep truck functional.
  • Logged driving hours and fuel usage data on time to keep reports current.
  • Coordinated shipping papers, customer documents and daily logs to maintain accurate records.
  • Planned efficient routes and adjusted strategies based on current weather and traffic information.
  • Established relationships with customers through use of interpersonal, active listening and inquiry response skills.
  • Updated logs with timely and accurate information meet internal requirements and DOT recordkeeping demands.
  • Loaded and unloaded freight, paying special attention to fragile items and carefully security every load for optimal protection and balance.
  • Completed transfers at hubs and final destinations to keep routes on schedule.
  • Managed proper transportation of dangerous goods with no incidents.
  • Inspected truck for defects and safe operating condition before, during and after trips.
  • Read and interpreted maps to determine vehicle routes.
  • Hooked and unhooked trailers from tractor and converter dollies.
  • Maintained telephone and radio contact with supervisor to receive delivery instructions.
  • Delivered customer orders to homes and places of business within established time frames.
  • Drove tractor-trailer combinations to transport and deliver products, livestock or other materials.
  • Retained valid proof of insurance and registration in vehicles.
  • Used ropes and blocks to safely secure cargo for transport.
  • Utilized pallet jacks and forklifts to load and unload materials off trucks.
  • Provided top product shipment delivery quality control, eliminating downtime and maximizing revenue.
  • Conducted emergency roadside repairs, changed tires, replaced light bulbs and installed fuses and tire chains.
  • Measured temperature of haul and refrigerated area of truck, keeping cold items fresh.
Education and Training
Expected in 03/2005 to to
GED:
Ozark Correctional Center - Missouri City, MO,
GPA:

By clicking Customize This Resume, you agree to our Terms of Use and Privacy Policy

Your data is safe with us

Any information uploaded, such as a resume, or input by the user is owned solely by the user, not LiveCareer. For further information, please visit our Terms of Use.

Resume Overview

School Attended

  • Ozark Correctional Center

Job Titles Held:

  • Welder/ Fabricator
  • CDL Driver
  • CDL Driver

Degrees

  • GED

By clicking Customize This Resume, you agree to our Terms of Use and Privacy Policy

*As seen in:As seen in: