Enthusiastic Welder committed to exceeding project expectations. Expert in preparing surfaces for welding by removing unwanted materials or grime and setting up proper equipment. Trained in operation and maintenance of related tools. Reliable welder accomplished with different metalworking techniques, types of projects and environmental conditions. Works independently to accomplish project goals and consistently completes assignments on-time. Skills include brazing, welding and flame cutting. Efficient welder able to handle continuous physical work in different environments while exceeding standards. Careful to use correct techniques for different types of materials and fits. Expert with wide range of power tools and equipment. Hardworking Farm Hand with experience operating wide range of agricultural equipment, including rotary tillers, tractors and plows. Talented at handling day-to-day operations for smooth farm operations. Excellent technical skills and hand-eye coordination. Regularly lifted 50 pounds.
Skills
Flux Core (FCAW) Welding
Stick Welding
Brake Press Operation
Torch Selection
Micrometers and Calipers
Welding Techniques
Filler Rod Selection
Defective Material Identification
Flat Welding Position
Attention to Detail
Equipment Selection
Torch Installation
Hand and Power Tool Operation
Gas Flow Adjustments
Mathematical Calculations
Decision Making
Power Tools Operation
Straightedge Measurements
Edge Joining
Specification Conformance
Aluminum Metal Welding
Vertical Welding
Overhead Welding Position
Time Management
Surface Material Preparation
Stainless Steel Metal Welding
Critical Thinking
Brakes and Shears Operation
Workpiece Measurements
Sheet Metal Fabrication
Machinery Upkeep
Property Maintenance
Safe Equipment Use
Building and Structural Repair
Livestock Operations
Farm Equipment and Machinery
Equipment Repair and Maintenance
Physical Stamina
Technical Skills
Tractor and Implement Operation
Heavy Lifting
Troubleshooting and Repair
Livestock Husbandry
Stall and Pen Cleaning
Schedule Coordination
Tractor Operation
Verbal and Written Communication
Facility Repairs
Livestock Health
Livestock Herding
Equipment Operation
Medications and Vaccinations
Task Prioritization
Equipment Maintenance
Experience
06/2021 to Current
WelderNord – Chelsea, MI,
Determined equipment and welding methods, applying knowledge of metallurgy, geometry and welding techniques.
Connected and turned regulator valves to activate and adjust gas flow and pressure and obtain desired flames.
Maximized shop organization and equipment lifespan by maintaining equipment.
Laid out, positioned, aligned and secured parts and assemblies with straightedges, squares and calipers.
Adjusted gas flow and pressure to create and maintain desired flames.
Positioned and secured workpieces using hoists, wire and banding machines or hand tools.
Welded fabrication materials, continuously checking for safety and quality.
Operated manual and semi-automatic welding equipment to fuse metal segments together.
Welded components in flat, vertical or overhead positions.
Read blueprints and drawings and took measurements to plan layout and procedures.
Monitored fitting, burning and welding processes to avoid overheating parts, warping, shrinking, distortion and expansion of materials.
Scraped off excess spatter using portable grinders and arc-cutting equipment.
Cut, contoured and beveled metal and structural shapes to achieve accurate dimensions.
Recognized, set up and operated shielded metal arc and gas metal arc welding equipment.
Determined welding strategies using metallurgy knowledge, geometry and welding techniques.
Set up equipment and welded parts according to welding chart specifications and type.
Prepared workpiece edges by grinding, cutting, buffing or bending to verify snug fit.
Prepared broken parts for welding by properly grooving and scarfing surfaces.
Operated manual and semi-automatic welding equipment in vertical, horizontal and overhead positions.
Produced work using appropriate welding techniques, metallurgy knowledge and engineering requirements.
Heated and dissolved metal parts to obtain molten substance used in welding or extrusion.
Prepared material surfaces for welding by removing scale, rust or other foreign matter.
Repaired structures by dismantling, reshaping and reassembling metal components with cutting torches and hand tools.
Aligned and clamped workpieces using rules, squares or hand tools.
Measured workpieces with straightedges or templates to conform with specifications.
Detected faulty operation of equipment or defective materials and notified supervisors.
Followed safety guidelines through proper machine guarding and lockout and tagout procedures.
Cleaned and inspected parts and assemblies at each production stage and documented production defects.
Safely ignited torches and monitored surroundings to proactively identify hazards.
Used welding skills to help repair and maintain heavy-duty machinery.
Completed minor torch ups with MIG welders.
Positioned and clamped workpieces together and properly assembled in jigs and fixtures.
Marked or tagged material with job number, piece marks and other identifying marks.
Adjusted weld machines to correct settings for precision and waste reduction.
05/2018 to 06/2021
WelderNord – Rochester, NY,
Adjusted weld machines to correct settings for precision and waste reduction.
Marked or tagged material with job number, piece marks and other identifying marks.
Positioned and clamped workpieces together and properly assembled in jigs and fixtures.
Determined equipment and welding methods, applying knowledge of metallurgy, geometry and welding techniques.
Connected and turned regulator valves to activate and adjust gas flow and pressure and obtain desired flames.
Completed minor torch ups with MIG welders.
Maximized shop organization and equipment lifespan by maintaining equipment.
Laid out, positioned, aligned and secured parts and assemblies with straightedges, squares and calipers.
Adjusted gas flow and pressure to create and maintain desired flames.
Used welding skills to help repair and maintain heavy-duty machinery.
Positioned and secured workpieces using hoists, wire and banding machines or hand tools.
Welded fabrication materials, continuously checking for safety and quality.
Operated manual and semi-automatic welding equipment to fuse metal segments together.
Welded components in flat, vertical or overhead positions.
Read blueprints and drawings and took measurements to plan layout and procedures.
Monitored fitting, burning and welding processes to avoid overheating parts, warping, shrinking, distortion and expansion of materials.
Scraped off excess spatter using portable grinders and arc-cutting equipment.
Cut, contoured and beveled metal and structural shapes to achieve accurate dimensions.
Recognized, set up and operated shielded metal arc and gas metal arc welding equipment.
Determined welding strategies using metallurgy knowledge, geometry and welding techniques.
Set up equipment and welded parts according to welding chart specifications and type.
Prepared workpiece edges by grinding, cutting, buffing or bending to verify snug fit.
Prepared broken parts for welding by properly grooving and scarfing surfaces.
Operated manual and semi-automatic welding equipment in vertical, horizontal and overhead positions.
Produced work using appropriate welding techniques, metallurgy knowledge and engineering requirements.
Heated and dissolved metal parts to obtain molten substance used in welding or extrusion.
Prepared material surfaces for welding by removing scale, rust or other foreign matter.
Repaired structures by dismantling, reshaping and reassembling metal components with cutting torches and hand tools.
Aligned and clamped workpieces using rules, squares or hand tools.
Measured workpieces with straightedges or templates to conform with specifications.
Detected faulty operation of equipment or defective materials and notified supervisors.
Followed safety guidelines through proper machine guarding and lockout and tagout procedures.
Cleaned and inspected parts and assemblies at each production stage and documented production defects.
Selected and installed torches, filler rods and flux according to welding chart specifications.
Safely ignited torches and monitored surroundings to proactively identify hazards.
09/2014 to 05/2018
Farm HandBarn Sanctuary – City, State,
Moved equipment, poultry or livestock manually or using trucks or carts.
Moved livestock to pastures for grazing or to scales and enclosures.
Examined animals to detect illness, injury or disease.
Broke in new horses with diligent and patient approach focused on building trust and obedience.
Fed and watered livestock and monitored food and water supplies.
Cleaned and maintained animal pens by raking up manure and putting down fresh straw and hay.
Patrolled holding habitats and grazing areas to monitor animal safety and make timely repairs to equipment, gates and pens.
Shifted animals between grazing areas to foster sufficient access to food.
Observed and listened to machinery operation to detect equipment malfunctions.
Completed harvesting activities using harvesters, tractors and other heavy equipment.
Used oil cans, hand tools and grease guns to lubricate and make minor repairs to farming machinery.
Drove trucks, tractors and other equipment to distribute feed to animals.
Herded livestock to pastures for grazing or to scales, trucks or other enclosures.
Maintained and repaired farming equipment to provide consistent usability, prime operational condition and alleviate downtime.
Assisted with maintenance and repair activities to keep buildings and equipment in safe and proper condition.
Administered medications and vaccinations or arranged for veterinarians to provide extensive treatment.
Used all-terrain vehicles to patrol expansive land holding, pastures and grazing areas to monitor animal activities.
Attached plows, sprayers or harvesters to tractors with bolts or hand tools.
Drove trucks and tractors to distribute feed to animals.
Watered and fed livestock and cleaned pens and enclosures to maintain farm animal health.
Marked livestock to identify ownership and grade using brands, tags or tattoos.
Repaired buildings, fences and other pertinent structures to keep animals properly contained.
Cleaned stalls, pens and equipment using water hoses or pumps.
03/2010 to 09/2014
Truck DriverThyssenkrupp Elevator Corporation – City, State,
Promoted positive customer service by delivering on-time shipments and fully resolving issues.
Established relationships with customers through use of interpersonal, active listening and inquiry response skills.
Planned efficient routes and adjusted strategies based on current weather and traffic information.
Aided senior leadership during executive decision-making process, generating daily logistics and productivity records.
Utilized pallet jacks and forklifts to load and unload materials off trucks.
Maintained vehicle logs, records of cargo, or billing statements in accordance with regulations
Logged driving hours and fuel usage data on time to keep reports current.
Notified customers of potential late deliveries, which resulted in [Number]% decrease in calls to company support line.
Followed regular schedule of pickups for individual customers and groups.
Read and interpreted maps to determine vehicle routes.
Inspected and maintained vehicle supplies and equipment to ensure vehicles remain in proper working condition.
Processed shipment documents neatly and efficiently for each load.
Conducted daily DOT pre-trip inspections according to set checklist.
Maintained telephone and radio contact with supervisor to receive delivery instructions.
Recorded expenses and maintained receipts.
Used ropes and blocks to safely secure cargo for transport.
Hooked and unhooked trailers from tractor and converter dollies.
Added fluids, checked tires and kept interior and exterior spotless as part of vehicle upkeep.
Used pallet jack and forklift to load and unload products at distribution centers and route locations.
Maintained strict compliance with safety rules for passenger and driver protection.
Obtained signatures needed to complete and process paperwork.
Updated logs with timely and accurate information meet internal requirements and DOT recordkeeping demands.
Loaded, balanced and secured product to safely transport goods.
Inspected trucks and trailers before and after trips and completed basic maintenance for optimal performance.
Responded quickly to customer complaints and gathered pertinent information to make educated decisions for remediation.
Provided top product shipment delivery quality control, eliminating downtime and maximizing revenue.
Conducted emergency roadside repairs, changed tires, replaced light bulbs and installed fuses and tire chains.
Inspected vehicle and personally handled routine upkeep.
Maintained safe driving habits to protect property and general public on roadways.
Reacted decisively and quickly to protect spoilage.
Inspected truck for defects and safe operating condition before, during and after trips.
Performed pre- and post-trip safety and maintenance checks to mitigate hazards.
Managed unexpected emergencies and route changes with calm and professionalism.
Retained valid proof of insurance and registration in vehicles.
Completed transfers at hubs and final destinations to keep routes on schedule.
Conducted vehicle inspections before and after every trip and performed minor repairs to keep truck functional.
Worked well with dispatchers to communicate route and schedule changes.
Any information uploaded, such as a resume, or input by the user is owned solely by the user, not LiveCareer. For further information, please visit our Terms of Use.