LiveCareer-Resume

Welder resume example with 9+ years of experience

Jessica
Claire
resumesample@example.com
(555) 432-1000,
, , 100 Montgomery St. 10th Floor
:
Professional Summary
  • Highly skilled Machinist with an exceptional ability to produce and repair mechanical equipment with precision and strong attention to detail.
  • Experienced Production Team Lead adept at improving team performance in settings. Proficient in schedule management, process improvements and employee training. Ready to offer years of experience to a growth-oriented position.
  • Excellent machine operator with years experience operating state-of-the-art welding machines and other types of machinery.
  • Experienced Machine Attendant focused on keeping work areas clean and equipment running at peak efficiency. Dependable Machine Attendant able to read and adhere to standard operating procedures. Detail-oriented and industrious professional with strong problem-solving abilities. Prepared to bring years of experience to a challenging new position.
  • Hardworking, strong and physically agile manufacturing professional with proven skills.
  • Experienced with over years of experience in . Excellent reputation for resolving problems, improving customer satisfaction, and driving overall operational improvements. Consistently saved costs while increasing profits.
  • Multi-talented consistently rewarded for success in planning and operational improvements. Experience in policy development and staff management procedures positively impacting overall morale and productivity.
Skills
  • Pipe fitting
  • Expertise in wire feed machines
  • Structural welding
  • Maintenance and repair
  • Welding
  • Shaping and cutting
  • Available to work in remote locations for long periods of time
  • Flexible
  • Fast-learner
  • Fabrication
  • MIG welding professional
  • Blueprints and schematics
  • Adept in precision and measuring tools
Education
Culver Community High School Culver, IN Expected in – – GED : - GPA :
Work History
Federal Signal Corporation - Welder
University Park, IL, 06/2018 - 06/2019
  • Clamped and tack-welded components to achieve desired configurations
  • Used arc, gas-shielded arc, submerged arc and gas welding equipment to weld parts safely and efficiently
  • Calibrated flow and pressure settings to build and maintain flames
  • Clamped, held, tack-welded, heat-bent, ground and bolted component parts to achieve required configurations and positions
  • Diagnosed and performed repairs for components
  • Inspected welds and checked whether critical measurements met specifications upon completion
  • Effectively managed repair and maintenance scheduled to increase shop organization and equipment longevity
  • Bolted, clamped and tack-welded parts to secure components prior to welding
  • Salvaged and rebuilt parts whenever possible
  • Welded in flat, horizontal, vertical and overhead positions
  • Detected faulty operation of equipment and defective materials and promptly resolved issues
  • Maintained correct length of arc and speed of movement to form specified depth of fusion and bead
  • Skilled with gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, shielded metal arc, resistance welding and submerged arc welding
  • Interpreted verbal and written instructions from work orders and welding blue prints
  • Chipped away debris and thick crusts of rust, slag and other materials to ready surfaces for welding
  • Removed excess slag with arc-cutting, grinding and other equipment
  • Chipped off excess weld, slag, and spatter using hand tools
  • Minimized warping by using good fitting, burning and welding techniques
  • Blew out machines, checked welding leads and wiring and changed filters for preventative maintenance
  • Removed rough spots from work pieces with portable grinders, hand files and scrapers
  • Repaired manufactured products by dismantling, straitening, reshaping and reassembling parts
  • Used MIG gun arc to melt and deposit metal from electrode to workpieces
  • Fabricated shop parts directly from blueprints
  • Examined structure and texture of parts to detect imperfections
  • Set up and operated hand and power tools, including shielded metal arc and gas metal arc welding equipment
  • Operated hoists, cranes and power tools to dismantle equipment to find and remove defective parts
  • Removed and repaired unacceptable welds with air arc and grinder to meet quality guidelines
  • Inspected grooves, angles and gap allowances with micrometer, caliper and precision measuring instruments
  • Set up equipment and welded parts according to welding chart specifications and type
  • Inspected and repaired components to implement corrective action
Ametek, Inc. - Service Technician
Pineville, NC, 09/2016 - 05/2018
  • Efficiently troubleshot and repaired equipment to cut company costs and maximize productivity.
  • Installed new equipment and explained operation and routine maintenance protocols to customers.
  • Reviewed technical documentation to perform accurate repairs on diverse equipment.
  • Developed detailed maintenance schedules for equipment to maximize equipment lifetimes.
  • Thoroughly cleaned and lubricated parts to keep equipment operating at peak performance.
  • Streamlined repair processes to minimize day-to-day downtime and increase overall productivity.
  • Accurately and efficiently installed equipment, including and .
  • Facilitated maintenance team training procedures to align with company standards.
  • Demonstrated increased knowledge of company products and equipment.
  • Adhered to safety protocols and policies to reduce workplace hazards.
  • Diagnosed and troubleshot problems, repairing and restoring machines to peak performance.
  • Evaluated systems according to predetermined checklist and noted issues.
  • Adjusted original installation plan and reviewed installations for compliance with local codes and good operating practices.
  • Performed maintenance duties and safely handled chemicals and solutions.
  • Inspected equipment to diagnose operational issues.
  • Serviced equipment to ensure expedient repair and minimal downtime.
  • Gained knowledge of standard equipment, including manufacturer repair guidelines.
Johnson Controls, Inc. - Lead Installer
Salt Lake City, UT, 10/2011 - 07/2014
  • Loaded and unloaded building materials used for construction
  • Inventoried supplies and materials for installations and repairs, documented changes and requested new inventory to meet expected demand
  • Performed inspections on pipes and sensors to double-check for leaks and obtain sensor readings for review
  • Completed installations and inspections on both commercial and private buildings for over 9 monthly clients
  • Examined blueprints, technical documentation and customer facilities to determine appropriate locations for installations
  • Tested installed systems after connecting water heaters and storage tanks to verify functionality and performance against targets
  • Accurately read, understood, and carried out written instructions
  • Informed supervisors when machines needed major service
  • Unpacked and assembled all new merchandise using variety of power tools
  • Blended paints and correctly matched colors
  • Followed company procedures to maintain work environment in neat and orderly condition
  • Operated equipment such as Skylifts
  • Developed and executed layout and installation of electrical wiring and fixtures based on job terms and city regulations
  • Maintained documentation for areas such as orders, activities, schedules and employee performance
  • Read work orders to prepare for machine setup
  • Performed routine preventive maintenance to ensure that building systems operated efficiently
  • Communicated operational issues and changes to supervisor on regular basis
  • Installed, aligned, and balanced new equipment
  • Consistently assumed additional responsibilities and worked extended hours to meet project deadlines
  • Supported technicians in equipment maintenance and repair
  • Completed tear-down of existing structures and prepared for new construction
  • Repaired wiring, plumbing, equipment, and machinery
  • Used schematic diagrams to plan work
  • Met production goals by maintaining cost effective levels of spare parts inventory
  • Monitored inventory and reported items to be restocked for each job
  • Reviewed plans from architects and consulted with clients to gain deeper understanding of project plans, constraints and objectives
  • Picked orders from inventory locations
  • Set ladders, scaffolds and hoists in place for taking supplies to roofs
  • Operated wide variety of equipment including power saws, sanders, grinders, cranes drill press, forklift and basic hand tools
  • Aided crews in joining, wrapping and sealing sections of pipe
  • Accurately read blueprints to install Duct work and materials effectively
  • Used hand tools to change worn cutting tools
  • Oversaw inventory, equipment maintenance and bay cleaning
  • Accurately estimated time and materials costs for projects
  • Followed standards and procedures to maintain safe work environment
  • Responsible for wide variety of duties including, pipe fitting, painting, carpentry, electrical repair, installation, building repair
  • Maintained compliance with company standards to perform all maintenance activities
  • Prepared and cleaned construction sites by removing debris
  • Employed wide variety of hand and power tools including hoists, drills, precision measuring instruments and electronic testing devices
  • Applied caulk, sealants and other agents to installed surfaces
  • Provided accurate measurements and estimates for all projects
  • Welded metal parts with gas welding equipment as specified by layout, welding diagram, or work order
  • Provided outstanding customer service
  • Filled chipped, cracked and broken bricks and tiles with adhesives and grouting materials to correct surface imperfections
  • Trained with company experts to weld intricate parts
  • Kept site work safe and in line with budget, schedule and applicable building codes
  • Used precision measuring instruments, templates, and fixtures to measure dimensions of finished work pieces
  • Maintained positive relationships with all customers
Bath Fitter - Installer Helper
Indianapolis, IN, 05/2007 - 09/2011
  • Enthusiastically took on additional shifts during peak work periods to keep projects on schedule
  • Examined incoming materials and compared to documentation for accuracy and quality
  • Used hand trucks, forklifts and scissor lifts to complete tasks and transport items
  • Documented production information via daily system logs and discussed non-conformance issues with management
  • Unloaded incoming products worth up to $10,000 and moved boxes to staging areas, sorted items and transported to final storage locations
  • Maintained maximum organization and productivity by properly sorting project components on work tables
  • Conducted quality inspections of finished products and made minor repairs to meet project expectations

By clicking Customize This Resume, you agree to ourĀ Terms of UseĀ andĀ Privacy Policy

Your data is safe with us

Any information uploaded, such as a resume, or input by the user is owned solely by the user, not LiveCareer. For further information, please visit our Terms of Use.

Resume Overview

School Attended

  • Culver Community High School

Job Titles Held:

  • Welder
  • Service Technician
  • Lead Installer
  • Installer Helper

Degrees

  • GED

By clicking Customize This Resume, you agree to ourĀ Terms of UseĀ andĀ Privacy Policy

*As seen in:As seen in: