LiveCareer-Resume

press operator resume example with 2+ years of experience

Jessica Claire
  • , , 609 Johnson Ave., 49204, Tulsa, OK 100 Montgomery St. 10th Floor
  • Home: (555) 432-1000
  • Cell:
  • resumesample@example.com
Summary

Experienced CNC machinist, Hobbing mill operator, 20 ton Press operator, and injection molding operator, with a large background in leadership positions, including experience as an assistant manager at rallys for about a year, as well as a portion of time as a team leader at aisin managing precise measurements on parts output of machines. verifying that parts meet quality standards. more than willing to work weekends and 12hr work days. well accustomed to leadership. very outgoing, adaptable, and energetic. always up for a challenge, and does well in tense or high stress situations, works well in a team. follows guidelines and is used to working in highly structured enviornmnts.

Skills
  • Component and Machine Calibration
  • Material Selection
  • Equipment Testing and Troubleshooting
  • Hand-Forming Workpieces
  • Work Planning and Prioritization
  • Specification Conformance
  • Time Management
  • Hand Tools and Measuring Devices
  • Work Order Interpretation
  • Clear Communication
  • Problem-Solving
  • CNC Software
  • Machine Start-Up and Shut-Down
  • Operation Monitoring
  • Attention to Detail
  • Die Changes and Stop Sets
  • Quality Inspections
  • Parts Replacement
  • Material Sorting and Categorizing
  • PPE Compliance
  • Material Transport
  • Flexible Schedule
  • Active Listening
  • Critical Thinking
  • Chemical Solution Safety
  • Sequence Planning
  • Quality Control Analysis
  • Operational Recordkeeping
  • Automated Inventory Software
  • Maintenance and Repair
  • Maintenance & Repair
  • Data Management
  • Conflict Resolution
  • Problem Resolution
  • Team Management
  • CNC and Manual Equipment
  • Tooling and Fixtures
  • Tapping and Milling
  • Machine Assembly
  • Flexible and Adaptable
  • CNC Machine Operation
  • Small Metal Parts Manufacturing
  • Verbal and Written Communication
  • Design Specifications
  • Heavy Lifting
  • Detail Oriented
  • Qualified Operator of Horizontal Boring Machine
  • Vertical Boring Machine Operation
  • Thread and Plug Gauges
  • Inventory Control
  • OSHA Compliance
  • Machine Setups
  • Dependable and Reliable
  • Corrective Maintenance
  • Hand and Power Tool Operation
  • Routine Machinery Checks
  • Basic Mathematics
  • Machinery Cleaning
  • Inspection Processes
  • Product Defect Identification
  • Precision Measuring Instruments
  • Troubleshooting and Diagnostics
  • Quality Control
  • Mechanical Assembly
  • Good Manufacturing Practices
  • Safety Protocols
  • Project Organization
  • Problem Solving
  • Friendly, Positive Attitude
  • People Skills
  • Fluent in Spanish
  • Product Storage
  • Product Sampling
  • First Aid/CPR
  • Analytical Thinking
  • Issue Resolution
  • Teamwork and Collaboration
  • Overseeing Daily Activities
  • Documentation and Reporting
  • Goal Setting
  • People Management
  • Quality Improvement
  • Quantitative Skills
  • Supervision & Leadership
Experience
Press Operator, 08/2022 to 01/2023
Sealed Air CorporationMumbai, IN,
  • Inspected printed products for clarity, color accuracy and conformance to provided specifications.
  • Removed printed materials from presses for transport to storage or finishing areas.
  • Took measurements with calipers and gauge readers to assess line performance.
  • Promoted safety within department and followed protocols to maximize safety and prevent risk.
  • Measured completed workpieces to verify conformance to specifications with micrometers, gauges, calipers and templates.
  • Applied knowledge of physical properties of workpiece materials to plan sequences and operations.
  • Turned controls to set cutting speeds, feed rates or table angles for specified operations.
  • Accurately set-up fold, adjusting roll mechanisms, tension and guide devices.
  • Set up and operated progressive presses to produce materials to customer specifications.
  • Reviewed daily production to identify continuous improvement opportunities.
  • Used care in loading molds to keep materials properly positioned.
  • Followed work orders to select proper materials, make accurate cuts and complete precise finished products.
  • Collaborated with technicians to diagnose equipment breakdowns and address quality issues.
  • Operated cranes, hi-los and other equipment safely to move materials around work areas.
  • Adhered to company and OSHA safety procedures to protect team members, products and equipment.
  • Leveraged preventive maintenance techniques to maintain or adjust equipment.
  • Troubleshot press when product defects occurred and immediately remedied issues.
  • Cut off excess materials for reuse or recycling.
  • Cleaned and lubricated presses and components using oil, solvents and rags.
  • Verified dimensions of work piece and made adjustments if necessary.
  • Examined completed pieces to check for defects and sorted items according to identified flaws.
  • Read work orders or production schedules to determine materials, locations of cutting lines or dimensions and tolerances.
  • Operated equipment at required speed to drive proper alignment and registration.
  • Installed, adjusted, dismantled, reassembled and removed parts and equipment such as rollers, dies, printing plates and blankets.
  • Used air hoses and swabs to clean compression chambers, arbors and molds.
  • Ground out burrs or sharp edges with portable grinders, speed lathes or polishing jacks.
  • Positioned, aligned and secured workpieces against fixtures or stops on machine beds.
  • Kept machines running at peak efficiency to meet demanding production targets.
Injection Molding Machine Operator, 06/2022 to 08/2022
Niagara BottlingOklahoma City, OK,
  • Inventoried and recorded quantities of materials and finished products, requisitioning additional supplies.
  • Checked casting equipment at beginning of shift to verify proper machine functionality and resolve identified malfunctions.
  • Maintained high levels of quality standards by closely monitoring progress and effectively streamlining procedures.
  • Trimmed excess material and reduced waste with precise measurements and execution.
  • Observed meters and gauges to verify and record temperatures, pressures and press-cycle times.
  • Entered data into manufacturing batch records using [Software].
  • Collaborated effectively on team of [Number] workers in fast-paced and quickly changing environment.
  • Delivered products to customer locations on time.
Machinist Team Lead, 12/2021 to 06/2022
Cashman EquipmentRound Mountain, NV,
  • Completed daily quality assurance duties to provide feedback for improvements.
  • Counted inventory, resolved discrepancies and completed paperwork to keep system accurate and current.
  • Kept work areas clean, neat and free of safety hazards to maximize efficiency.
  • Rotated through series of different stations based on team needs.
  • Monitored team progress and enforced deadlines.
  • Reviewed completed work to verify consistency, quality and conformance.
  • Sustained lockout and tag-out safety protocols by properly using equipment and materials.
  • Monitored feed and speed of machines during machining process to report problems and required repairs.
  • Troubleshot and repaired machines to increase productivity and decrease spending.
  • Measured and marked dimensions and reference points to meet precise specifications.
  • Gauged and maintained tolerances on grinding diameters, depths, squareness and parallelism.
  • Constructed appropriate offset corrections for tool wear, broken tools and casting variations.
  • Welded, heat treated and repaired worn and damaged equipment to optimize performance.
  • Calibrated machinery to optimize performance according to prescribed standards and specific project needs.
  • Incorporated new preventive and corrective maintenance processes to increase equipment lifespan.
  • Measured, marked and indicated dimensions and reference points on materials.
  • Selected appropriate speeds and feeds according to metal type and finish specifications.
  • Followed written instructions to set up and operate manual equipment and computer-controlled production machines.
  • Dismantled and inspected components to complete necessary adjustments and repairs.
  • Maintained logs, lists and files and promptly completed necessary paperwork.
  • Sharpened, replaced and tracked cutting tools to adhere to strict quality control and usage schedules.
Machinist, 10/2020 to 12/2021
Aisin DrivetrainCity, STATE,
  • Monitored feed and speed of machines during machining process to report problems and required repairs.
  • Measured and marked dimensions and reference points to meet precise specifications.
  • Gauged and maintained tolerances on grinding diameters, depths, squareness and parallelism.
  • Constructed appropriate offset corrections for tool wear, broken tools and casting variations.
  • Operated hand tools, drill presses, riveting machines and tap burners to safely produce projects.
  • Measured, marked and indicated dimensions and reference points on materials.
  • Followed written instructions to set up and operate manual equipment and computer-controlled production machines.
  • Maintained logs, lists and files and promptly completed necessary paperwork.
Education and Training
High School Diploma: , Expected in 02/2019 to Whites Adult Education - Greenwood, IN,
GPA:

By clicking Customize This Resume, you agree to our Terms of Use and Privacy Policy

Your data is safe with us

Any information uploaded, such as a resume, or input by the user is owned solely by the user, not LiveCareer. For further information, please visit our Terms of Use.

Resume Overview

School Attended

  • Whites Adult Education

Job Titles Held:

  • Press Operator
  • Injection Molding Machine Operator
  • Machinist Team Lead
  • Machinist

Degrees

  • High School Diploma

By clicking Customize This Resume, you agree to our Terms of Use and Privacy Policy

*As seen in:As seen in: