Cnc Operator Two resume example with 20+ years of experience

Jessica Claire
  • Montgomery Street, San Francisco, CA 94105 609 Johnson Ave., 49204, Tulsa, OK
  • Home: (555) 432-1000
  • Cell:
Professional Summary

Reliable Construction worker offering expertise gained over 10-year career in diverse labor roles. Enthusiastic and eager to contribute to team success through hard work, attention to detail and excellent organizational skills. Versed in completing physically-challenging jobs and working long hours under all types of weather conditions.

  • Lifting 75 pounds
  • Measurement and Calculation Accuracy
  • Drywalling
  • New Construction
  • Safety and compliance
  • Forklift trained
  • Protective gear
  • Power Tools
  • Electrical Installation and Repair
  • Painting
  • Construction knowledge
  • Tile installation
Work History
CNC Operator Two, 02/2017 to Current
AlmacoNevada (Remote), IA,
  • Adhered to high level of safety by following company rules and regulations to prevent injuries.
  • Maintained tight tolerances with design specifications.
  • Properly loaded and unloaded materials in and out of machines.
  • Moved finished work to correct staging area for disposition.
  • Measured completed pieces to identify product irregularities and specifications non-conformance; adjusting machines to correct issues.
  • Reviewed and interpreted schematics, blueprints and work instructions to determine product specifications and machine requirements.
  • Devoted special emphasis to punctuality and worked to maintain outstanding attendance record, consistently arriving to work ready to start immediately.
Assembly Technician, 10/2015 to 02/2017
Cavco IndustriesWaco, TX,
  • Worked directly with QA personnel to identify and correct defects.
  • Executed regular tests and inspection procedures to assemble products according to specifications.
  • Inspected all work for quality and compliance with design standards.
  • Assembled and aligned parts and fixtures using hand and power tools.
  • Kept work areas clean, organized and safe to promote efficiency and team safety.
  • Trained new employees and promoted supportive, performance-oriented atmosphere by, instructing each in use of machinery, standard operating procedures and company policies.
  • Maximized productivity by keeping detailed records of daily progress and identifying and rectifying areas for improvement.
  • Removed debris and trash and swept up metal parts following each shift to keep work areas clean and organized.
  • Assembled products and components using variety of equipment, including drill press, power tools and rivet press machinery, making proactive adjustments to settings to produce work within tight tolerances.
Construction Worker, 06/2009 to 09/2011
Norsk Hydro AsaCressona, PA,
  • Transported daily work materials to worksite and staged supplies in work area to facilitate timely completion of day's goals.
  • Monitored operating machinery to assess progress, adjust settings and maintain desired tension and speeds.
  • Maintained clean workplace and supervised end-of-day cleanup activities to remove all debris and unnecessary supplies from customer premises.
  • Kept project on schedule and within budget while serving as project leader.
  • Assisted with successful, time-sensitive renovations of residential and commercial structures.
  • Installed new structures, updated systems and replaced worn components to bring buildings up to current codes.
  • Erected and removed temporary structures such as trench liners and scaffolding to meet team needs.
  • Provided accurate measurements and estimates for all projects.
  • Operated power tools and forklift equipment to move materials and promote job efficiency.
  • Provided first class customer service to meet all deadlines with guaranteed satisfaction.
  • Maintained and repaired facilities, equipment and tools to achieve operational readiness, safety and cleanliness.
  • Actively attended safety trainings and workshops offered by employer, bolstering overall knowledge of appropriate measures and determining areas requiring improvement.
Maintenance Technician, 06/2008 to 06/2009
TeslaSanta Fe, NM,
  • Completed daily, weekly and monthly checklists on building equipment to maintain records of scheduled maintenance procedures.
  • Performed minor wall repair to maintain walls, including installing drywall and repairing and applying wallpaper.
  • Worked with building managers to assess ongoing needs and plan preventive maintenance and cleaning schedules.
  • Performed locksmithing tasks by installing new locks, door handles and door closers with hand and power tools.
  • Maintained cleanliness of buildings and property.
  • Tossed all outdoor debris, including yard clippings into receptacles to properly maintain grounds.
  • Inspected systems in use to detect problems, complete maintenance and recommend solutions.
  • Inspected fire extinguisher equipment to maintain safe environment for workers or residents.
  • Interpreted drawings, blueprints and schematics of building and systems layout as well as machinery construction.
  • Followed all work orders and specifications to determine which machines and equipment required replacement, repair or maintenance.
Roofer, 06/2001 to 07/2005
Blackberry FarmWalland, TN,
  • Supported construction manager with materials, schedule and cost information.
  • Applied gravel and pebbles over top layer, using rake and stiff-bristled broom.
  • Precisely cut felt, shingles and strips of flashing to fit angles formed by walls, vents and intersecting roof surfaces.
  • Safely used all tools and equipment to prevent worksite injuries.
  • Removed snow, water and debris from roofs prior to applying roofing materials.
  • 4 years in roofing industry.
  • Expanded knowledge of roofing materials, techniques and cost effectiveness.
  • Installed, repaired, and replaced single-ply roofing systems.
  • Fastened composition shingles and sheets to roof with asphalt, cement and nails.
Drywaller, 11/1998 to 06/2001
Thomas CrownCity, STATE,
  • Completed installation of drywall sheets on commercial and residential properties.
  • Prepared panels by sawing, drilling or cutting holes for electrical outlets, air-conditioning units and plumbing.
  • Applied tape to seal joints by embedding into sealing compound.
  • Received consistent excellent feedback on work quality and customer service.
  • Maintained excellent attendance record, consistently arriving to work on time.
  • Laid out materials and system components to prepare for installation.
  • Pressed paper tape into joints to reinforce drywall and hide imperfections.
  • Sanded joints and treated areas to create smooth surface.
Plastering Contractor, 09/1994 to 05/1998
Self-MadeCity, STATE,
  • Applied coats of plaster to interior walls, ceilings and partitions to produce finished surfaces according to blueprints.
  • Effectively and independently estimated quantity of materials needed to perform work.
  • Prepared and mixed materials for projects, including paste, cement and mortar.
  • Roughened undercoats with scratchers to provide bond for succeeding coats of plaster.
  • Climbed scaffolding, staging, ladders and planks to reach work area surfaces and observed safety protocols to prevent falls.
  • Minimized disruption of client space and thoroughly cleaned up after completion of each job.
  • Applied primer, paints, varnishes and lacquers to walls and surfaces using traditional and sprayer methods.
  • Obtained correct dimensions and specifications by properly measuring areas.
  • Taped around windows and fixtures prior to painting walls.
  • Safely operated power sprayers and hand tools to prepare and paint large areas.
Landscaper, 03/1993 to 11/1995
Emerald City LandscapingCity, STATE,
  • Maintained routine landscaping schedules to boost lawn health and keep facilities neat and well-groomed.
  • Installed stonework according to landscape design plan and client specifications.
  • Trimmed greenery, shrubs and hedges to maintain uniform appearance.
  • Maximized water conservation by checking sprinkler spray angles and testing performance of digital controllers.
  • Applied weed-control and pest-killing chemicals to lawns to protect growth and improve attractiveness.
  • Removed overgrowth, hazards and debris from common pathways to improve usability.
  • Installed underground sprinkler systems to provide grass and greenery with adequate water supply.
  • Mowed lawns using self-propelled and riding mowers.
GED: , Expected in 03/1991
South Seattle Community College - Seattle, WA
: Automotive Technology, Expected in 03/1998
South Seattle Community College - Seattle, WA
: (CNC) Machinist Technology Apprenticeship, Expected in 04/2024
South Seattle Community College - Seattle, WA

By clicking Customize This Resume, you agree to our Terms of Use and Privacy Policy

Your data is safe with us

Any information uploaded, such as a resume, or input by the user is owned solely by the user, not LiveCareer. For further information, please visit our Terms of Use.

Resume Overview

School Attended

  • South Seattle Community College
  • South Seattle Community College
  • South Seattle Community College

Job Titles Held:

  • CNC Operator Two
  • Assembly Technician
  • Construction Worker
  • Maintenance Technician
  • Roofer
  • Drywaller
  • Plastering Contractor
  • Landscaper


  • GED

By clicking Customize This Resume, you agree to our Terms of Use and Privacy Policy

*As seen in:As seen in: