Safety Consultant Resume Example Snap Safety Services

SAFETY CONSULTANT

Professional Summary

An ambitious safety professional with the ability to provide the highest quality of work. Driven to protect workers and the environment in a cost-effective method. Motivated to maintain an outstanding and professional relationship with all customers.

Work Experience

Safety Consultant, 09/2014 － Current Snap Safety Services － Kersey, CO

Ensures safe operations by implementing and maintaining the health, safety, and environmental systems and programs established by the Company.
Works with the Company Representative and first line supervisors to ensure the safety of all personnel on rig site.
Conducts risk assessments for all areas of work in coordination with the Company Representative and First Line Supervisors; regularly checks that established safety procedures are followed.
Monitors and critiques the Job Safety and Environmental Analysis (JSEA) program and provides feedback to rig supervisors and crews.
Collects, records, analyzes, and evaluated accident or near miss data to determine root and contributing causes of an incident.
Effectively compile data to construct a formal report following an incident investigation.
Works with the crews to improve safety standards and practices by participating in safety meetings, pre-job meetings, risk assessments, inspections, audits, behavior observations and accident investigations.
Audits on a regular basis to ensure that safe operating practices and safety procedures are carried out; advises on how to rectify unsafe procedures and practices.
Conducts and documents safety inspections to identify potential unsafe conditions and hazards.
Takes immediate corrective action to mitigate risk and correct any potential hazards.
Enforces LOTO (Lockout/Tagout) policies and procedures.
Maintains updated knowledge of all applicable local and federal health, safety and environmental laws.
Provides on-site training on OSHA policies and procedures.
Ensures all personnel safety training and certificates are up to date.
Establishes proper relationships with personnel to enforce behavioral based safety program.
Leads pre-tower safety meetings.

Health Safety & Environmental Technician, 07/2014 － 09/2014 Stranco － Houma, LA

Observed safe work practices, and present opportunities for improvement.
Mentored employees and encourage their safe work practices; and encouraged hazard hunts throughout the facility.
Assisted in achieving and maintaining HS&E compliance.
Provided day to day direct support and hands on assistance to rig employees to implement compliance programs and training.
Responsible for implementing the full scope of company HS&E compliance programs, process and procedures from personnel training, gap assessments, audits and closure verification
Assisted in the delivery of training and instruction for all procedures, rules and regulations in all phases of compliance.
Enforced permits for jobs that require a permit to work, including confined space entry, review job safety analysis, lock out tag out, and ensure their closures.
Conducted routine inspections on HS&E equipment such as fire fighting, rescue/life saving, spill kits, personal protective equipment (PPE), and fall protection.
Collected, recorded, analyzed, and evaluated accident or near miss data to determine root and contributing causes of an incident.
Effectively compile data to construct a formal report following an incident investigation.
Implemented post incident remedial actions (PIRA) associated with accidents or near misses
Attended pre-tower, weekly safety, job safety and environmental analysis (JSEA) meetings, and additional HS&E meetings in order to convey information that may affect personnel, equipment, and/or job duties.

Confined Space Rescue Technician, 02/2014 － 07/2014 Total Safety International － Broussard, LA

Provided leadership in achieving health and safety goals.
Productively identified safety and environmental issues and ensures compliance with Federal, State, Company and client standards.
Ensures that issues are identified, addressed, and elevated if necessary, in a timely manner.
Trained in vessel entry techniques, life support and communication, vaccumation and all other catalyst handling procedures.
Assisted in assessing risks, readying rescue equipment and planning practical and effective solutions towards safe working practices in compliance with OSHA, NFPA and client's standards.
Trained to locate the patient, assess any injuries, packages for extrication, removes patient from the threatening environment and turns over to EMS for medical attention and transport.
Performed on-going monitoring of job conditions and equipment resources and reports observations and recommendations to supervisor to assure both worker and team safety is maintained at all times. Completes daily ICS (Incident Command System).
Assisted in assessing potential hazards and drafts a Confined Space Rescue Preplan and a Rescue Safety Analysis (RSA). Identifies and communicates potential hazards to all affected parties.
Determined hazard controls and emergency contingency plans and ensures that required safety equipment and PPE is readily available and in good working order.
Conducted general air quality monitoring and make recommendations for hazard control or personal protective equipment based on the interpretation of this data.
Conducted daily job briefings with customer and workers.
Followed handling, inspection, cleaning and preventative maintenance guidelines for all rescue equipment so that it is in a constant state of readiness.

Heavy Equipment Operator, 12/2013 － 02/2014 Weatherford International － Broussard, LA

Repair and maintain plug and abandonment equipment on job site.
Attended Weatherford and customer required specialized training courses in plug and abandonment services.
Work assignments carried out to the highest quality level.
Performed routine checks on vehicles and equipment prior to use.
Conducted rig maintenance and services.
Performed routine equipment maintenance as assigned.
Participated in Job Safety and Environmental Analysis (JSEA) meetings.

Performed emergency repairs on vehicles and equipment, if necessary

Cavalry Scout, 12/2009 － 04/2013 United States Army － Ft. Hood, TX

Over 4 years of experience as a cavalry scout in the US Army.
Responsible for operating and performing operator maintenance on wheeled vehicles, scout vehicles; armored airborne reconnaissance vehicles, cavalry fighting vehicles, crew-served weapons, and communications equipment.
Utilized hand jack, pneumatic jack, and pneumatic power tools.
Assisted in the recovery of wheeled and tracked vehicles.
Secured, prepared and stowed communication on scout vehicles.
Performed mounted and dismounted navigation.
Gathered and reported information on terrain features and enemy strength, disposition and equipment.
Collected data for the classification of routes, fords, tunnels, and bridges.
Assisted with the construction of light field fortifications, laying and removal of mines, and employing demolitions.
Involved in combat tour to Iraq, (2010 to 2011).
Responsible for training Iraq Police during Operation Iraqi Freedom.
Involved in over 320 combat missions during Operation Iraqi Freedom.

Education

2014 Gulf Coast Emergency Rescue Academy － Saraland, Al

2009 Freedom High School － Bethlehem, Pa High School Diploma

Certifications

Access to Medical Records
API RP 2D 6th Ed. Rigging
Back Safety
Basic Fire Fighting (USCG, STCW)
Behavioral Based Safety
Blood Borne Pathogens
Communication
Control of Hazardous Energy (Lockout/Tagout)
DOT Hazardous Materials / HM 126F
Drugs and Alcohol Awareness
Electrical Safety (Non-Qualified)
Emergency Response
Excavation and Trenching
Fall Protection User / Rescuer
First Aid (CPR / Bloodborne Pathogens – (USCG,STCW)
Government Regulations Research Workshop
Hazard Communication/Global Harmonization System
Hazard Identification
HAZWOPER 40
Hearing Conservation
Hydrogen Sulfide (H2S)
Incident Reporting and Investigation
Introduction to Oilfield and Drilling Operations & Equipment
Job Safety Analysis
Marine Trash & Debris
National Safety Council Defensive Driving
NORM
Occupational Health Hazards
OSHA 30 Hour General Industry Outreach Training
Recording and Reporting Occupational Injuries & Illnesses
Permit Required Confined Spaces – Rescuer
Personal Protective Equipment (PPE)
Personal Safety and Social Responsibility (PSSR) (USCG, STCW)
Personal Survival/HUET (Helicopter Underwater Egression Training) (USCG, STCW)
Powered Industrial Trucks (Forklifts)
Process Safety Management (PSM)
Production Safety Systems Training (PSST)
Prep. For T2 Test
Respiratory Protection
SafeGulf
SafeLand USA
Safety Tech (CST Certification)
Safety Environmental Management System (SEMS)
Scaffolding Serve Safe
Stop Work Authority
Terrorism Response Awareness
Walking & Working Surfaces
Welding, Cutting and Brazing
Work Permits (Hot Work, LOTO, Confined Space, Cold Work

Skills

OSHA Regulations
Working At Heights
Rope Access
Safety Training SEMS
USCG Regulations
BSEE Regulations
Rescue Safety Analysis
Permit To Work Technical Rescue

Resume Overview

Create a job alert for [job role title] at [location].

About About

Help & Support Help & Support

Languages Languages

Customer Service Customer Service

Safety Consultant Resume Example

Resume Score: 90%