LiveCareer-Resume

maintenance worker resume example with 11+ years of experience

Jessica Claire
, , 609 Johnson Ave., 49204, Tulsa, OK 100 Montgomery St. 10th Floor
Home: (555) 432-1000 - Cell: - resumesample@example.com - - -
Summary
Highly motivated Sales Associate with extensive customer service and sales experience. Outgoing sales professional with track record of driving increased sales, improving buying experience and elevating company profile with target market.
Skills
  • Verbal and Written Communication
  • Emergency Repairs
  • Mechanical Systems
  • Record Keeping
Experience
05/2017 to 09/2022
Maintenance Worker Lifescape Sioux Falls, SD,

Worked on pneumatics, electrical and welded

  • Operated hand tools and power tools to make minor maintenance repairs and maintain grounds and walks.
  • Used rulers and micrometers to inspect parts and determine dimension requirements.
  • Removed snow from sidewalks, driveways and parking areas.
  • Inspected heating, ventilation and air-conditioning systems for efficiency to help maintain good indoor air quality.
  • Repaired minor carpentry, electrical and plumbing issues to return equipment to functionality.
  • Notified management about necessary repairs or professional service needs for building operating systems.
  • Cleaned vents and replaced filters to verify proper air flow.
  • Followed correct procedures for handling, transporting and disposing of new and recycled materials.
  • Collaborated with team members to assess equipment performance needs.
  • Identified problems during daily work inspections and addressed concerns.
  • Assisted with installing and maintaining electrical and power systems during remodeling projects.
  • Repaired equipment and machinery, performing maintenance according to updated industry standards.
  • Read work orders or received instructions from supervisors or homeowners to determine work requirements.
  • Diagnosed and repaired mechanical issues according to industry standards.
  • Maintained compliance with internal and regulatory safety standards.
  • Examined alarm systems and portable fire extinguishers for physical damage requiring repair.
  • Performed tasks to maintain on-site physical security, safety and efficiency.
  • Calculated required materials needed based on field measurements or work orders.
  • Replaced wall sockets, ran lines and completed basic carpentry to finish installations.
  • Changed air conditioning filters to improve indoor air quality and help HVAC system perform properly.
  • Diagnosed equipment malfunctions and performed repairs to restore equipment and maintain uptime.
  • Maintained clear and safe workspace areas to meet OSHA standards.
06/2013 to 05/2018
Electrical Worker Department Of Defense Hickam Air Force Base, HI,
  • Repaired electrical equipment using hand and power tools and testing and diagnostic equipment.
  • Tested and repaired electric motors, variable frequency drives, alarms and control systems.
  • Frequently worked overtime, weekends and holidays.
  • Inspected electrical components to identify hazards, defects, or potential repairs in compliance with codes.
  • Tested electrical systems and circuit continuity using ohmmeters, voltmeters, or oscilloscopes.
  • Interpreted electrical and mechanical schematics, blueprints and diagrams.
  • Advised management on issues of safety in continued equipment operation.
  • Collaborated with architects on electrical systems design for new construction.
  • Performed troubleshooting and diagnosis on malfunctioning systems or components.
  • Reviewed blueprints to determine electrical component and wiring locations.
  • Coordinated and executed installation of electrical wiring and fixtures according to job specifications and local codes.
  • Tested energized and de-energized circuits, following test procedures and assisted in specialized test procedures.
  • Installed conduits or pipes inside partitions, walls or other designated, concealed areas.
  • Maintained inventory of parts for immediate and emergency repairs.
  • Used power construction equipment, measuring devices and testing equipment to complete electrical installations.
  • Identified and addressed hazards, defects and repair requirements through inspection of electrical equipment.
  • Dismantled electrical components using hand tools to disconnect and restore wiring connections.
  • Diagnosed equipment malfunctions and completed repairs to restore equipment and maintain uptime.
  • Installed leads and connected cables to motors, apparatus and equipment.
  • Collected and analyzed data and created reports based on findings.
  • Connected and repaired equipment based on mechanical drawings and electrical prints.
  • Installed new electrical components, fixtures and motors.
  • Performed monthly, semi-annual and annual Preventive Maintenance Checks and Services (PMCS).
  • Pulled insulated wires or cables through conduits to complete circuits.
  • Addressed and resolved worksite safety hazards to reduce risk.
  • Supervised apprentices and assessed completed tasks, offering guidance and encouragement.
  • Planned layout and installation of wiring and fixtures based on project specifications and building codes.
  • Installed electrical wiring during remodeling projects.
  • Established outstanding relationships with electricians and consumers.
  • Diagnosed malfunctioning wiring using test equipment to locate faults.
  • Connected wires to circuit breakers, junction boxes and components in residential and commercial properties.
  • Led teams and delegated tasks to install, maintain, or repair electrical systems and wiring.
  • Analyzed specifications and blueprints to coordinate electrical installations.
  • Provided electrical services and control wiring for diverse locations.
  • Read and worked from electronic blueprint drawings.
  • Fabricated parts according to specifications using hand and power tools.
  • Trained workers to install, maintain and repair electrical equipment and fixtures.
  • Climbed towers, worked in confined crawl spaces and worked flexible, non-standard workweek.
08/2011 to 06/2013
Welder Nabors Industries, Ltd. Magnolia, TX,
  • Prepared workpiece edges by grinding, cutting, buffing or bending to verify snug fit.
  • Cleaned and inspected parts and assemblies at each production stage and documented production defects.
  • Connected and turned regulator valves to activate and adjust gas flow and pressure and obtain desired flames.
  • Determined welding strategies using metallurgy knowledge, geometry and welding techniques.
  • Completed minor torch ups with MIG welders.
  • Cut, contoured and beveled metal and structural shapes to achieve accurate dimensions.
  • Produced work using appropriate welding techniques, metallurgy knowledge and engineering requirements.
  • Safely ignited torches and monitored surroundings to proactively identify hazards.
  • Operated manual and semi-automatic welding equipment to fuse metal segments together.
  • Positioned and secured workpieces using hoists, wire and banding machines or hand tools.
  • Adjusted gas flow and pressure to create and maintain desired flames.
  • Heated and dissolved metal parts to obtain molten substance used in welding or extrusion.
  • Operated manual and semi-automatic welding equipment in vertical, horizontal and overhead positions.
  • Detected faulty operation of equipment or defective materials and notified supervisors.
  • Adjusted weld machines to correct settings for precision and waste reduction.
  • Marked or tagged material with job number, piece marks and other identifying marks.
  • Scraped off excess spatter using portable grinders and arc-cutting equipment.
  • Aligned and clamped workpieces using rules, squares or hand tools.
  • Used welding skills to help repair and maintain heavy-duty machinery.
  • Conducted hydrostatic and tolerance tests on welded parts to verify weld quality and conformance to specifications.
  • Repaired structures by dismantling, reshaping and reassembling metal components with cutting torches and hand tools.
  • Measured workpieces with straightedges or templates to conform with specifications.
  • Determined equipment and welding methods, applying knowledge of metallurgy, geometry and welding techniques.
  • Conducted x-ray, hydrostatic and tolerance tests on welded parts to verify weld quality and conformance to specification.
  • Recognized, set up and operated shielded metal arc and gas metal arc welding equipment.
  • Prepared broken parts for welding by properly grooving and scarfing surfaces.
  • Welded fabrication materials, continuously checking for safety and quality.
  • Followed safety guidelines through proper machine guarding and lockout and tagout procedures.
  • Selected and installed torches, filler rods and flux according to welding chart specifications.
  • Welded components in flat, vertical or overhead positions.
  • Positioned and clamped workpieces together and properly assembled in jigs and fixtures.
  • Monitored fitting, burning and welding processes to avoid overheating parts, warping, shrinking, distortion and expansion of materials.
  • Laid out, positioned, aligned and secured parts and assemblies with straightedges, squares and calipers.
  • Prepared material surfaces for welding by removing scale, rust or other foreign matter.
  • Set up equipment and welded parts according to welding chart specifications and type.
  • Read blueprints and drawings and took measurements to plan layout and procedures.
  • Maximized shop organization and equipment lifespan by maintaining equipment.
  • Melted and applied solder along adjoining edges of workpieces to solder joints.
Education and Training
Expected in 04/2001 to to
High School Diploma:
Wilson High School Florence Al - Florence, AL,
GPA:

By clicking Customize This Resume, you agree to our Terms of Use and Privacy Policy

Your data is safe with us

Any information uploaded, such as a resume, or input by the user is owned solely by the user, not LiveCareer. For further information, please visit our Terms of Use.

Resume Overview

School Attended

  • Wilson High School Florence Al

Job Titles Held:

  • Maintenance Worker
  • Electrical Worker
  • Welder

Degrees

  • High School Diploma

By clicking Customize This Resume, you agree to our Terms of Use and Privacy Policy

*As seen in:As seen in: