SEARCH

Supervisor Resume Example

Resume Score: 90%

Love this resume?Build Your Own Now
SUPERVISOR
Summary
I was a supervisor for two years in a corrosion control facility for the US Government. As a shift supervisor of three employees I was directly responsible for the maintenance and upkeep of twelve aircraft paint schemes. I currently maintain a US Government "Secret Security Clearance".
Experience
January 2004
to
January 2012
US NavyVirginia Beach, VASupervisor
  • Worked on F/A-18C.
  • Masked and covered surfaces not to be painted.
  • Performed Plastic Media Blasting to remove paint and corrosion.
  • Striped, sanded, masked, and repainted surfaces, and blended and polished finish to match surrounding areas, manually or using portable power tools.
  • Cleaned, sanded, and applied chemical solutions to prepare and condition surfaces prior to painting.
  • Mixed and thinned paint or other coating to specified color and consistency according to standard formulas or color charts, using mixing equipment.
  • Sprayed specified amount or thickness of primer, protective, decorative, or finish coatings, such as paint, lacquer, sealer, or enamel, onto prepared surfaces, using spray equipment.
  • Painted surfaces of aircraft, applying knowledge of surface preparation and painting techniques, using spray painting equipment, power tools, and work aids.
  • Applied or retouched paint, using brush.
  • Laid out and painted insignias, symbols, designs, or other markings on painted surfaces, according to blueprints or specifications, using stencils, patterns, measuring instruments, brushes, or spray equipment.
  • Regulated controls on equipment to cure and dry paint or other coatings.
  • Set up portable ventilators, exhaust units, ladders, and scaffolding prior to painting.
  • Mainly worked on Aluminum metals.
  • Respirator qualified.
  • Supervised corrosion control facility supervising three employees directly responsible for the maintenance and upkeep of twelve aircraft paint schemes Ran and followed Tool Control Program and procedures Followed technical manuals and safety procedures Inventoried HAZMAT Separated HAZWASTE to EPA regulations Recorded and tracked HAZMAT usage Ordered HAZMAT for daily use Helped maintain an 0% accident rate in safety within my shop.
January 2012
to
Current
U.S. Navy ReserveJacksonville, FLAdministration Clerk
  • Prepare, type, and route correspondence and reports.
  • Organize and maintain files.
  • Recieve office visits and handle telephone communications.
  • Operate computers, word processing, and duplicating documents.
  • Maintain records and other official publications.
October 2013
to
June 2014
TyonekJacksonville, FLAircraft Worker
  • Worked on P-3s, T-34s, T-44s, and F/A-18s.
  • Masked and covered surfaces not to be painted.
  • Performed Plastic Media Blasting to remove paint and corrosion.
  • Striped, sanded, masked, and repainted surfaces, and blended and polished finish to match surrounding areas, manually or using portable power tools.
  • Cleaned, sanded, and applied chemical solutions to prepare and condition surfaces prior to painting.
  • Mixed and thinned paint or other coating to specified color and consistency according to standard formulas or color charts, using mixing equipment.
  • Sprayed specified amount or thickness of primer, protective, decorative, or finish coatings, such as paint, lacquer, sealer, or enamel, onto prepared surfaces, using spray equipment.
  • Painted surfaces of aircraft, applying knowledge of surface preparation and painting techniques, using spray painting equipment, power tools, and work aids.
  • Used chemicals to strip paint and clean aircraft parts Masked and covered surfaces to prevent Plastic Media and chemical stripper from entering unwanted areas.
November 2014
to
March 2015
Strom AviationAtlanta, GAAircraft Painter
  • Worked on Boeing 737 - 777 and Airbus 320.
  • Masked and covered surfaces not to be painted.
  • Striped, sanded, masked, and repainted surfaces, and blended and polished finish to match surrounding areas, manually or using portable power tools.
  • Cleaned, sanded, and applied chemical solutions to prepare and condition surfaces prior to painting.
  • Mixed and thinned paint or other coating to specified color and consistency according to standard formulas or color charts, using mixing equipment.
  • Sprayed specified amount or thickness of primer, protective, decorative, or finish coatings, such as paint, lacquer, sealer, or enamel, onto prepared surfaces, using spray equipment.
  • Used rollers and brushes to apply paint Painted surfaces of aircraft, applying knowledge of surface preparation and painting techniques, using spray painting equipment, power tools, and work aids Used chemicals to strip paint and clean aircraft parts Masked and covered surfaces to prevent chemical stripper from entering unwanted areas Followed blueprints to apply stencils for markings and placards.
April 2015
to
October 2015
Launch TWSTampa, FLAircraft Painter
  • Worked on Airbus 319 & 320.
  • Masked and covered surfaces not to be painted.
  • Sanded, masked, and repainted surfaces, and blended and polished finish to match surrounding areas, manually or using portable power tools.
  • Cleaned, sanded, and applied chemical solutions to prepare and condition surfaces prior to painting.
  • Mixed and thinned paint or other coating to specified color and consistency according to standard formulas or color charts, using mixing equipment.
  • Rolled or brushed specified amount or thickness of primer, protective, decorative, or finish coatings, such as paint, lacquer, sealer, or enamel, onto prepared surfaces, using spray equipment.
Education
Florida State College of JacksonvilleJacksonville, FLAircraft Coating Technician Certificate *Intern Hours; 148 hours with Associated Painters
Tulsa Welding SchoolJacksonville, FLWelding Certificate Job-Related Training
Interests
Aviation Structural Mechanics Common Core, Class A1 (4 weeks) Aviation Structural Mechanic Organizational Level Strand Class (40 hours) Aircraft Corrosion (40 hours) Aircraft Paint/Finish (80 hours)
Additional Information
  • Aviation Structural Mechanics Common Core, Class A1 (4 weeks) Aviation Structural Mechanic Organizational Level Strand Class (40 hours) Aircraft Corrosion (40 hours) Aircraft Paint/Finish (80 hours) Honors, Awards Navy HYPERLINK "http://www.usamilitarymedals.com/navy-ribbons-awards-navy-marine-corps-achievement-medal-ribbon-c-2070_21_230.html"&HYPERLINK "http://www.usamilitarymedals.com/navy-ribbons-awards-navy-marine-corps-achievement-medal-ribbon-c-2070_21_230.html" Marine Corps Achievement Medal Ribbon Affiliations Member of the American Legion Post 76 M.U.C.H. (Makers United for Children's Hope) Foundation
Skills
blueprints, C, charts, color, office, painting, paint, power tools, publications, Maintain records, maintain files, safety, supervising, technical manuals, Technician, telephone, type, Welding, word processing
Build Your Own Now

DISCLAIMER

Resumes, and other information uploaded or provided by the user, are considered User Content governed by our Terms & Conditions. As such, it is not owned by us, and it is the user who retains ownership over such content.

Resume Overview

Companies Worked For:

  • US Navy
  • U.S. Navy Reserve
  • Tyonek
  • Strom Aviation
  • Launch TWS

School Attended

  • Florida State College of Jacksonville
  • Tulsa Welding School

Job Titles Held:

  • Supervisor
  • Administration Clerk
  • Aircraft Worker
  • Aircraft Painter

Degrees

  • Welding Certificate Job-Related Training

Similar Resumes

View All
Supervisor-resume-sample

Supervisor

Adidas

South Gate, California