site development foreman resume example with 7+ years of experience

Jessica Claire
  • , , 609 Johnson Ave., 49204, Tulsa, OK 100 Montgomery St. 10th Floor
  • H: (555) 432-1000
  • C:
  • Date of Birth:
  • India:
  • :
  • single:
Professional Summary

Motivated individual with a variety of experience and knowledge that is professionally beneficial. Excellent relationship-building and critical thinking skills with a determined and decisive mind set.

  • Job Planning
  • Decision Making
  • Problem Solving
  • Labor Management
  • Detail Focused
  • Troubleshooting and Diagnostics
  • Written Communication
  • Calm Under Pressure
  • Multitasking and Prioritization
  • Site Management
  • Hardworking and Reliable
  • Flexible Schedule
  • Energetic and Positive
Work History
Site Development Foreman, 08/2019 - Current
Cox Automotive Mcallen, TX,
  • Oversaw employee attendance record, handled employees weekly hours and ordered new materials for sites.
  • Checked equipment to determine if maintenance was required.
  • Reworked positions and workflow based on individual abilities and production targets.
  • Planned project resources by assigning funds, materials and staff throughout lifecycle of projects.
  • Attended monthly on-site meetings with property management and company supervisors.
  • Verified completed projects met approved time, quality and cost estimates.
  • Assessed quality control report data from Heavy Jobs to monitor and detect issues with quality of final products.
  • Maintained zero site accidents and lost work days for 2 year.
  • Established clear priorities and production quality standards.
  • Set and revised production schedules to meet changing demands.
  • Evaluated incoming materials for quality and amounts ordered.
  • Wrote production reports to help senior leadership make accurate operational plans and decisions.
  • Reviewed project details to specify correct materials and equipment for job sites.
  • Interacted with employees to demonstrate high standards and mitigate issues effectively.
  • Handled issues with relative ease by implementing best practices and applying critical thinking skills to find best solutions.
  • Maximized resource utilization and achieved production targets by managing day-to-day usage of department resources.
  • Meticulously tracked parts and equipment used on each job site.
  • Perform critical labor skills such as install waterlines, storm drain pipe, electrical conduit and other utilities.
  • Responsible for operating and maintaining a CCTV camera car to inspect storm drain pipe and document any flaws that may not meet county specifications.
  • Operate and maintain heavy equipment
  • Read site plans/blueprints to determine utility,road and storm drain locations
Automotive Technician Apprentice, 06/2018 - 08/2019
State Of Minnesota Saint Peter, MN,
  • Completed customer orders and warranty services according to manufacturer specifications.
  • Performed diagnostic and troubleshooting procedures to find and identify root causes of mechanical issues.
  • Troubleshot and diagnosed faults with vehicle systems and components using OEM-specific code readers, diagnostic trees and online knowledge bases.
  • Analyzed and located malfunctions in brakes, motors, switches and control systems.
  • Tested newly installed equipment to determine proper functionality and compliance with regulations.
  • Inspected and tested vehicles and completed preventive maintenance such as engine tune-ups, oil changes, tire rotations, wheel balancing and filter replacement.
  • Changed, rotated and balanced tires on different types of vehicles.
  • Maintained accurate records of time and materials required to perform repairs and service.
  • Serviced vehicles according to OEM recommended maintenance schedules for oil changes, engine tune-ups and fluid changes.
  • Corrected unsafe conditions in work areas and immediately reported correctable conditions to supervisor.
  • Maintained functionality and reliability of engines, machines and systems through regular diagnostic checks.
  • Kept equipment in good working order by following operating instructions, troubleshooting breakdowns and maintaining supplies.
  • Completed full vehicle inspections to check for leaks, damage or other issues of concern.
  • Used specialized tools to detect leaks in gas and refrigerant systems.
  • Replaced damaged, missing or defective parts with new and refurbished components.
  • Dismantled faulty assemblies to repair or replace worn or damaged parts.
  • Assisted in rebuilding, replacing and repairing vehicle parts such as engines, brakes, transmission lines and electrical assemblies.
  • Used wrenches and hoists to remove units such as engines and transmissions.
  • Conducted road tests on vehicles per to verify safe operating order of vehicle.
  • Replaced gaskets, flushed coolant, and performed tune-ups as part of minor vehicle maintenance.
  • Raised vehicle on hydraulic jack or hoist to gain access to mechanical units bolted to underside of vehicle.
  • Maintains vehicle records by recording service and repair tasks, using ISTA and ICOMs.
Plumbing Assistant, 01/2016 - 06/2018
O'Connor Plumbing & Heating & Cooling City, STATE,
  • Unclogged sinks and toilets for customers using tools and drain cleaners.
  • Removed old sinks, toilets and pipes in preparation for installation of new fixtures.
  • Measured, threaded and cut materials to correct angles.
  • Fabricated piping pieces and components in line with design specifications for each system.
  • Conducted thorough inspects and tests of previously installed systems to locate and correct faults.
  • Assisted with repairs to steam, drainage and sewer lines.
  • Cut openings in structures to accommodate pipes and pipe fittings.
  • Located and repaired or replaced worn and broken components to enhance system functionality and durability.
  • Interpreted blueprints to determine locations, quantities and sizes of materials required.
  • Employed skills in cementing and welding to finalize high-quality piping systems.
  • Provided emergency services to install and repair toilets, water heaters, appliances and showers to maintain customer satisfaction ratings.
  • Filled pipe systems with water and air to determine location of leaks.
  • Communicated with customers to provide recommendations on repairs, determine project estimation costs and define project completion dates.
  • Inspected sewers and piping systems to assess quality and condition.
  • Carried materials and tools from truck to properly set up job site.
  • Measured and cut pipes according to project specifications under supervision of journeyman plumber.
  • Listened to instructions from journeyman plumber, gaining valuable onsite job training.
  • Followed safety practices with tools and general behaviors to prevent accidents and safeguard equipment.
  • Performed basic and semi-skilled work under supervision and instruction from lead plumber.
  • Tested for leaks in new and repaired systems to verify functional and safe working condition.
  • Organized and moved materials from truck to job site to support project requirements.
  • Safely handled tools and equipment in large-scale projects.
  • Responded to emergency situations to resolve immediate safety concerns.
  • Requested equipment and supplies to maintain inventory and availability of required items.
  • Eliminated risks by correctly identifying potential safety hazards.
  • Laid out full-scale drawings of pipe systems, supports and related equipment according to blueprints.
  • Appropriately fitted pipes by identifying dimensions, sizes and shapes needed to replace faulty pipes.
  • Inspected work sites to determine presence of obstructions and determined where to cut pipes for structural integrity.
  • Operated drill motors, grinders, chop saws, hack saws and burning torches to perform tasks.
Heavy Equipment Mechanic, 03/2014 - 01/2016
Delmarva Site Development City, STATE,
  • Performed routine and preventive maintenance on dozers, haul trucks, excavators and other heavy equipment.
  • Replaced defective wiring systems, hydraulics and braking systems to return machines to service.
  • Removed worn or faulty components for replacement or repair.
  • Operated machining equipment safely with team of operators.
  • Maintained meticulous records of all repair work that was made to machines and equipment.
  • Analyzed malfunctioning equipment and determined type of repairs required.
  • Used hand tools to disassemble equipment, perform repair work and then reassemble parts.
  • Traveled 80% of time to work on-site at customer locations.
  • Used critical thinking to break down problems, evaluate solutions and make decisions.
  • Used coordination and planning skills to achieve results according to schedule.
  • Carried out day-day-day duties accurately and efficiently.
  • Developed and maintained courteous and effective working relationships.
  • Drove operational improvements which resulted in savings and improved profit margins.
High School Diploma: , Expected in 06/2014
Broadneck High School - Annapolis, MD
Status -

By clicking Customize This Resume, you agree to our Terms of Use and Privacy Policy

Your data is safe with us

Any information uploaded, such as a resume, or input by the user is owned solely by the user, not LiveCareer. For further information, please visit our Terms of Use.

Resume Overview

School Attended

  • Broadneck High School

Job Titles Held:

  • Site Development Foreman
  • Automotive Technician Apprentice
  • Plumbing Assistant
  • Heavy Equipment Mechanic


  • High School Diploma

By clicking Customize This Resume, you agree to our Terms of Use and Privacy Policy

*As seen in:As seen in: