Livecareer-Resume
Jessica Claire
, , 100 Montgomery St. 10th Floor
Home: (555) 432-1000 - Cell: - resumesample@example.com - -
Professional Summary

Painters Assistant experienced with use of water and oil-based paints of different brand, sheen, coverage and use. Primed walls and surfaces in preparation of painting, allowing smooth, seamless final product. Smoothed walls and surfaces, removing or installing fixtures or wallpaper. Painters Assistant with 5 years of experience painting and home remodeling. Prepared rooms and walls, both interior and exterior for painting. Serviced and assembled equipment and tools needed for painting. Painters Assistant with 5 years of experience painting and home remodeling. Prepared rooms and walls, both interior and exterior for painting. Serviced and assembled equipment and tools needed for painting. Motivated Painter driven to provide high-quality work. Adept at working quickly without sacrificing results. Ready to bring 5 years' experience to new position with long-term potential. Painters Assistant with 5 years of experience painting and home remodeling. Prepared rooms and walls, both interior and exterior for painting. Serviced and assembled equipment and tools needed for painting. Motivated Painter driven to provide high-quality work. Adept at working quickly without sacrificing results. Ready to bring 5 years' experience to new position with long-term potential.

Skills
  • Respirator use
  • Hand and power tools
  • Drywall and trim specialist
  • Safety awareness
  • NACE coating requirements
  • High-end residential work
  • Blast and paint equipment servicing
  • Wall repair
  • Paint mixing
  • Organization and Time management
  • Leadership
  • Basic math
  • Critical thinking
  • Self-motivated professional
Work History
01/2018 to 07/2021
Painter's Assistant 3M Companies Norcross, GA,
  • Cleaned job site after project completion, removing tape and tarps and inspecting for drips or inconsistencies in paint application.
  • Prepared rooms prior to painting by laying tarps, taping edges, mixing paint and building scaffolding.
  • Primed surfaces evenly prior to painting allowing paint to be applied evenly.
  • Worked with water and oil-based paints and trained on removal of unwanted or splattered paints.
  • Demonstrated knowledge of workplace safety principles and practices.
  • Masked, covered or otherwise protected non-paintable surfaces.
  • Smoothed and cleaned surfaces and removed wallpaper prior to painting allowing even coating of paint.
  • Completed finish coats on low-visibility surfaces.
  • Followed painter's directions for product application and site cleanup.
  • Managed contracts and invoices from customers confirming on-time payment.
  • Adhered to manufacturer instructions for paints, solvents and materials use.
  • Placed ladders and scaffolds in correct locations and moved equipment as work progressed to completion.
  • Carried paints and painting supplies to each job site and positioned to comply with painter's instructions.
  • Scheduled consultations and presentations with new customers demonstrating technique, timeline, expectations and color contrast.
  • Returned equipment and unused painting supplies to proper locations after each workday.
  • Utilized proper personnel protective equipment during painting and preparation, avoiding inhalation of hazardous debris and toxic particulates.
  • Advised customers on paint types based on brand, quality, sheen and application needs.
  • Mixed and applied glue for wallpaper and applied wallpaper to interior walls combining wallpaper with paint.
  • Applied primers and rough coats according to painter's directions.
  • Advised painter of safety or health issues related to site preparation or product use.
  • Prepared different paintable surfaces prior to product application.
  • Cleaned brushes, rollers and equipment prior to use.
03/2017 to 12/2020
Assembly Technician Teeny Foods Portland, OR,
  • Maintained good stock levels, counted parts and requested additional supplies.
  • Inspected all work for quality and compliance with design standards.
  • Kept work areas organized, tidy and clean for maximum productivity.
  • Performed assembly of products according to specifications and instructions.
  • Operated equipment safely and troubleshot any malfunctions.
  • Worked directly with QA personnel to identify and correct defects.
  • Completed pre-assembly activities
  • Followed operating procedures to maintain logbooks.
  • Assigned and oversaw daily production schedules to 10 employees.
  • Executed regular tests and inspection procedures to assemble products according to specifications.
  • Trained assemblers and provided adequate knowledge about machine processes.
  • Created labels and packaging using label making software and label machines.
  • Planned employee rules and shift timings.
  • Assembled and aligned parts and fixtures using hand and power tools.
  • Built containers and packed parts in accordance with detailed packing specifications.
  • Set up and tested monitors and calculators and recorded test data per engineering and quality specifications.
  • Repainted and precisely touched-up components and assemblies.
  • Installed protective devices such as bracing, padding, or strapping to prevent shifting or damage during shipping.
  • Recognized and reported defective material and equipment to shift supervisor.
  • Maintained counts and lifts, shifts and stocks materials and parts.
  • Verified part numbers and placed parts in appropriate shipping containers.
  • Made and revised set ups on test strands previously calibrated by other staff.
  • Planned and paced work efficiently in order to meet daily, weekly, project or production goals.
  • Executed entire assembly process by accurately interpreting set-up sheets, work orders, drawings or blueprints.
01/2010 to 12/2016
Machine Operator Ugi Corp. Laredo, TX,
  • Followed tooling instructions and product specifications to determine and implement operational sequences.
  • Monitored machines during operation to detect sounds of malfunction or excessive vibration and adjusted machines to eliminate problems.
  • Calibrated, tested, and adjusted machine settings or controls in preparation for production operations.
  • Manually set up machinery, lathes and grinders.
  • Set up and ran machinery to produce exceptional products for industrial needs.
  • Set accurate feed rates and trimming protocols to maintain efficient production and meet schedule demands.
  • Read and interpreted blueprints and schematics for production runs.
  • Ran heavy duty lathes, boring machines, mills, planers and grinders to craft products.
  • Established parameters for each job to attain high scores on production test.
  • Kept detailed production records and identified hold-ups.
  • Tended operating machinery to identify equipment malfunctions and locate sources of product defects.
  • Fabricated new and repaired defective components, using lathes and 3D printers.
  • Operated machining equipment safely with team of operators.
  • Set up and operated various machine tools and jigs to produce precision parts.
  • Set appropriate stops and guides to specified lengths as indicated by scale, rule or template.
  • Complied with company and OSHA safety rules and regulations.
  • Updated daily production logs and informed management of production incidents or non-conformance issues.
  • Assessed equipment after each production run and performed preventive maintenance to keep machines running smoothly.
  • Identified malfunctions or failures by routinely monitoring and analyzing equipment operations.
  • Dismantled machinery to access, remove and replace worn components and keep production within optimal tolerances.
  • Maintained equipment performance by lubricating and cleaning components.
04/2005 to 10/2009
Utility Worker Pilgrims Pride City, STATE,
  • Kept work area clean, neat and well-stocked to maximize productivity.
  • Completed daily maintenance tasks in record time to maximize productivity.
  • Collected and disposed of trash and debris.
  • Repaired floors, walls, seats and any other structure in need of attention.
  • Increased safety and efficiency through designing and adhering to detailed work schedules.
  • Closely monitored equipment availability and functionality to maximize production and keep detailed records.
  • Maintained machine utility equipment based on strict schedules.
  • Efficiently and safely operated machines after checking changing daily work orders.
  • Positively engaged with customers and maintained professional appearance as company representative.
  • Optimized work readiness with effective gathering of parts and supplies in alignment with specifications.
  • Removed trash and recyclables at end of each shift and disposed of items in proper receptacles.
  • Supervised maintenance functions, working collaboratively with sanitation crews on shop floor upkeep and repairs.
  • Reported issues to property manager so effective resolutions could be put into place.
  • Continuously adhered to strict regulations as well as detailed instructions, guidelines and specifications.
  • Installed, aligned and balanced new equipment while managing work of 10 employees.
  • Safely and effectively handled wide range of cleaning products and solutions.
  • Successfully alleviated issues by using troubleshooting method.
  • Executed tasks within time and budget constraints.
  • Followed instructions from supervisor regarding daily job tasks and duties.
Education
Expected in 12/2001
GED:
Technical College System of Georgia - Noble,Ga,
GPA:

By clicking Customize This Resume, you agree to our Terms of Use and Privacy Policy

Disclaimer

Resumes, and other information uploaded or provided by the user, are considered User Content governed by our Terms & Conditions. As such, it is not owned by us, and it is the user who retains ownership over such content.

How this resume score
could be improved?

Many factors go into creating a strong resume. Here are a few tweaks that could improve the score of this resume:

94Good

resume Strength

  • Formatting
  • Length
  • Personalization
  • Strong Summary
  • Target Job
  • Typos
  • Word Choice

Resume Overview

School Attended

  • Technical College System of Georgia

Job Titles Held:

  • Painter's Assistant
  • Assembly Technician
  • Machine Operator
  • Utility Worker

Degrees

  • GED

By clicking Customize This Resume, you agree to our Terms of Use and Privacy Policy

*As seen in: