field supervisor resume example with 20+ years of experience
JessicaClaire
, , 100 Montgomery St. 10th Floor(555) 432-1000, resumesample@example.com
Summary
Veteran 18 years Field Supervisor with hands-on approach to solving problems and correcting deficiencies. Versed in setting schedules and maintaining timelines. Ready to apply experience and construction expertise to challenging new position. I've been in the construction industry since I could remember as kid my grandfather owned his company and shard his passion and knowledge and in turn gave me a upper hand as I learned many skill trades at a young age im currently in the management field as I bring many years of knowledge and certification from heavy equipment operating ,Blue staking , fusing ,pipefitting ,batch plant supervisor....etc I take my work very personal and I take pride in my work id like to say after every job I leave there is are calling card for those who see the work that I leave behind.... professionalism.
Skills
Trench work
Safe equipment operation
Effective communication skills
Reliable and trustworthy
Subsurface Utility Locating and Marking trained
Blueprint reading
Blue staking /utilities locating certified
Writing reports
Troubleshooting
Leadership
Time management
Job order prioritization
Material prepping
Piping specifications
ANSI, ASME and PFI codes knowledge
Air and water piping systems
Knowledgeable of applicable local codes
Drainage systems repair
Friendly, positive attitude
People skills
Training & Development
Project coordination
Safety management
Construction management
Supervisor management coarse
Welding safety precautions
skid steer operator
Excavator track hoe operator
Dozer operator
Blade operator
Remote dozer operator
Backhoe operator
Reach fork operator
fork lift operator
front end loader operator
Articulating haul truck operator
Man lift operator
Pipefitter
Fusing H.D.P.E certified
Decision-making
Experience
07/2011 to CurrentField SupervisorAdvanced Residuals Management Llc | Hawesville, KY,
Completed projects milestones on time by keeping team members on task and operating with efficiency.
Developed successful resolutions for issues that arose during field operations.
Monitored timelines, set up order of operations and managed field schedules.
Maintained positive vendor relationships and open lines of communication to enable resource availability.
Troubleshot with fault isolation techniques and utilized remote test systems to isolate and resolve ongoing issues.
Resolved customer issues and built strong, productive relationships with project stakeholders.
Implemented proactive adjustments to work by evaluating current performance and progress with critical eye.
Oversaw workflow on job sites and kept projects on schedule.
Read project documents, interpreted directions and made plans based on design parameters.
Prepared and planned worksites to help jobs run smoothly.
Delegated duties to employees based on skillset.
Kept production team moving forward for progress in daily site operations.
Recorded job supplies, parts, equipment and employee hours.
Created work crew schedules and delegated assignments.
Obtained specifications and directed work for construction crews.
Allocated material and labor resources to promote on-time and under-budget project completion.
Implemented onsite safety protocols and procedures and properly trained team members on prevention measures, reducing injuries 100%.
Used paint, flags and other methods to communicate utility information to excavators and other appropriate personnel.
Responded to emergency situations quickly that arose following illegal excavations and provided effective remediation.
Used tools, equipment and vehicles to avoid injuries and mishaps.
Identified and sketched locations of utility lines and marked areas of existing utilities for future usage.
Worked under strict deadlines and responded to service requests and emergency call-outs.
Operated front end loader to move dirt and different base materials.
Performed pre-shift and post-shift equipment inspections and accurately completed reports to support company policy.
Operated excavators and other construction equipment to properly grade land.
Employed heavy equipment operation best practices resulting in minimal complaints or incidents.
Promoted company's strict safety protocols for operation of machinery to reduce accidents and injuries.
Kept equipment fueled and ready for immediate use to support scheduling demands.
Transported materials around construction sites to work locations.
Followed signals from ground crew and other operators to safely move materials and prevent dangerous interactions or missed cues.
Learned about new equipment and related attachments while maintaining knowledge of items used daily to meet job requirements.
Maintained machinery by repairing and replacing broken and malfunctioning components.
Improved project completion time by multitasking on heavy equipment.
Performed grading and shaping land for building and finishing purposes.
Loaded and moved dirt, rocks, equipment and materials.
Took care to locate and stake critical underground utilities prior to beginning work.
Maintained equipment on-site with regular maintenance and repairs.
Operated equipment to remove debris, snow or other equipment from streets and work areas.
Adjusted throttles, switches and pedals to operate bulldozers, trench excavators, road graders or backhoes.
Operated heavy equipment to demolish current structures, remove plants or trees and clear property of debris.
Maintained equipment and made emergency or scheduled adjustments.
Maintained strong quality control standards to prevent costly rework.
Used work orders, verbal directions and technical documentation to coordinate team plans.
Inspected worksites to detect obstructions and adjust installation plans.
Managed employee training for maximum performance and safety.
Read and interpreted specifications, diagrams and blueprints for job.
Observed safe work rules, including fall protection and PPE.
Handled all responsibilities for piping systems, including fabricating, assembling, installing and maintaining.
Threaded and installed pipe using pipe wrench and dies.
Threaded pipes using specified machinery.
Performed hydrostatic pressure testing of boilers and pressure vessels.
Drilled and tapped holes for installation of studs.
Identifying signs of potential problems with boilers and pressure vessels, such as tube leakage, scaling, pitting, metals discoloration and refractory failures.
Installed piping systems for plumbing for both domestic and HVAC lines.
fusing H.D.P.E pipe and fittings
H.D.P.E pipe handling procedures
Concrete batch plant supervisor
Concrete batch plant operator
09/XXX4 to 02/2011ForemanSunrun Inc. | Leeds, NY,
Built strong community relations with subcontractors and vendors to optimize cost savings and complete timely preconstruction.
Communicated with employees to demonstrate high standards and mitigate issues.
Viewed and checked job equipment to determine maintenance requirements.
Checked project details to verify job site materials and equipment.
Complied with federal and company regulations to maintain high level of job site safety.
Managed sites by focusing on safety, operations and productivity.
Was in direct contact with military personal on coordinating job activities and completion of projects
Used paint, flags and other methods to communicate utility information to excavators and other appropriate personnel.
Responded to emergency situations quickly that arose following illegal excavations and provided effective remediation.
Used tools, equipment and vehicles to avoid injuries and mishaps.
Identified and sketched locations of utility lines and marked areas of existing utilities for future usage.
Worked under strict deadlines and responded to service requests and emergency call-outs.
01/1997 to 01/XXX4Electrician/PipefitterGRC-Electrical / RC-mechanical | City, STATE,
Read and interpreted specifications, diagrams and blueprints for job.
Observed safe work rules, including fall protection and PPE.
Handled all responsibilities for piping systems, including fabricating, assembling, installing and maintaining.
Threaded and installed pipe using pipe wrench and dies.
Threaded pipes using specified machinery.
Managed movement of materials and equipment to different job sites.
Performed hydrostatic pressure testing of boilers and pressure vessels.
Drilled and tapped holes for installation of studs.
Assembled and disassembled boilers, tanks, vats, pressure vessels, exchangers and heaters according to blueprint specifications.
Utilized welding and soldering equipment to join sheet metal components in compliance with blueprints and job specifications.
Identifying signs of potential problems with boilers and pressure vessels, such as tube leakage, scaling, pitting, metals discoloration and refractory failures.
Installed piping systems for plumbing for both domestic and HVAC lines.
Filled piping systems with water and air to test for leaks.
Installed and repaired gas lines and hot and cold water lines.
Cut openings in walls and floors to accommodate pipe and pipe fittings.
Identified, removed and replaced worn components to maximize system functionality.
Applied specialized skills such as welding and cementing to complete high-quality piping work.
Hoisted loads using slings, chains, shackles, hooks, cables and other rigging equipment.
Installed conduit, wire and motor controls.
Connected wires to circuit breakers and transformers.
Traced and diagnosed electrical malfunctions using hand tools and test equipment.
Interpreted schematics, blueprints and diagrams to complete projects on time.
Adhered to specifications and codes in installation of electrical wiring, equipment and fixtures.
Directed electricians on installation, maintenance and repair on electrical wiring and equipment.
Worked extensively on three-phase, 277/480 volt power distribution systems.
Planned and installed complicated circuit systems in both commercial and residential construction.
Learned about new equipment and related attachments while maintaining knowledge of items used daily to meet job requirements.
Performed grading of site land and smoothed surfaces as part of projects or finish work.
Followed signals from ground crew and other operators to safely move materials and prevent dangerous interactions or missed cues.
Observed company safety protocols, including trench safety and perimeter establishment, to reduce job site accidents.
Removed tools and machinery from job site and secured location at end of shift.
Steered forklifts, hand trucks, scissor lifts and other equipment to move materials around work sites.
Located and marked underground pipes and wires to determine accurate digging locations.
Put up and attached structural components, poured concrete and completed other construction-related tasks.
Operated front end loader to move dirt and different base materials.
Performed pre-shift and post-shift equipment inspections and accurately completed reports to support company policy.
Operated excavators and other construction equipment to properly grade land.
Created holes and trenches for underground stormwater sewer infrastructure.
Education and Training
Expected in to to | Electrical Equipment Installation And RepairLos Angeles Trade Technical College, Los Angeles, CAGPA:
Expected in to to | PipefittingLos Angeles Trade Technical College, , GPA:
Any information uploaded, such as a resume, or input by the user is owned solely by the user, not LiveCareer. For further information, please visit our Terms of Use.