Construction Engineering Supervisor Resume Example
Love this resume?Build Your Own Now
CONSTRUCTION ENGINEERING SUPERVISOR
Summary
Skilled security professional with 20 years providing security services in federal buildings, corporate settings, apartment complexes, retail facilities and construction sites.
Security Officer accomplished in securing and protecting governmental science and technology facilities. Brings techniques gained from a background in law enforcement training.
Protective services professional with strong law enforcement background. Approaches each case with a high level of professionalism, offering each case its proper due diligence.
Highlights
Natural leader Weapons training |
|
Accomplishments
Awarded by management with several official commendations for personal achievement and contributions to the team.
Promoted to Staff Supervisor after 6 years of employment.
Experience
Construction Engineering Supervisor
January 2012 to January 2013US Army － City , STATE
January 2012 to January 2013US Army － City , STATE
- Supervised the construction, repair, and utility of buildings, warehouses, and fixed bridges, port facilities, and petroleum pipelines.
- Read and interprets construction drawings.
- Estimate material, time, labor, and equipment requirements.
- Inspects structures and facilities to ensure compliance with specifications.
Combat Engineer
January 2000 to CurrentUS Army － City , STATE
January 2000 to CurrentUS Army － City , STATE
- Detailed understanding of the interrelationships of circuits.
- Perform such tasks as making circuit analyzes, and tracing relationships in signal flow.
- Use complex test instruments such as high frequency pulse generators, frequency synthesizers, distortion analyzers, and complex computer control equipment.
- Reads, interprets, and plots maps, overlays, and photos; develops and uses engineering tools.
- Determines limiting slopes, curves, stream velocity, and gap widths.
- Assembled structural parts and components to meet requirements for preserving structural integrity and low observable qualities, posted entries and maintained maintenance and inspection records.
- Provide the US Army with hands-on and over-the-shoulder radio and communications maintenance training utilizing Aero flex analyzers, Fluke multi-meters, Bird watt meters, Marconi signal generators and BKP frequency counters, Boonton modulation meters and TEK 4ch oscilloscopes.
- Assist in developing communication system maintenance management and repair program Advise maintenance personnel on the basic and intermediate maintenance, troubleshooting, repair and service of LMR HF/ VHF communications equipment.
Combat Engineer
January 1992 to January 2000US Army
January 1992 to January 2000US Army
- Detailed understanding of the interrelationships of circuits.
- Perform such tasks as making circuit analyzes, and tracing relationships in signal flow.
- Use complex test instruments such as high frequency pulse generators, frequency synthesizers, distortion analyzers, and complex computer control equipment.
- Reads, interprets, and plots maps, overlays, and photos; develops and uses engineering tools.
- Determines limiting slopes, curves, stream velocity, and gap widths.
- Assembled structural parts and components to meet requirements for preserving structural integrity and low observable qualities, posted entries and maintained maintenance and inspectionrecords.
- Provide the US Army with hands-on and over-the-shoulder radio and communications maintenance training utilizing Aero flex analyzers, Fluke multi-meters, Bird watt meters, Marconi signal generators and BKP frequency counters, Boonton modulation meters and TEK 4ch oscilloscopes.
- Assist in developing communication system maintenance management and repair program Advise maintenance personnel on the basic and intermediate maintenance, troubleshooting, repair and service of LMR HF/ VHF communications equipment.
Education
Diploma : 2001University of
*Strong Vincent HS － City, State
Intermediate Electronic Principles, Keesler AFB, MS, 2010
*Telephone Central Office Repair, 1987
*HAZMAT Familiarization/Safety Transport, 2007
*Forward Area Alerting Radar Repairer, 1990
Personal Information
Performed and supervised maintenance on manual, semiautomatic, and transportable communication systems. Excellent teaming skills Ability to work independently and without direct supervision Excellent written and verbal communication skills Excellent organizational, administration, and computer skills (Microsoft Office Suite 2010). Able to show past pattern of success in influencing candidates to show interest in an organization. Ability to evaluate process compliance, write/review CA/PA reports, perform root cause analysis and validate quality processes, responses, and plans. Familiarity of ISO 9001:2008 & AS9100
Interests
Active DOD Secret clearance (12 Jan 2011) and current US passport. (20 Jan 2011) US Army 12B (Combat Engineer), US Army 12H (Construction Engineering Supervisor) 24 years hands-on experience installing hardware and software programs to enable integrated communication systems used to accommodate command, control, and information purposes. Subject Matter Expert (SME) at developing vertical, road, bridges and airfield construction and rigging, bridging, and demolition activities. Experienced with electronic integrated communications, radar and navigational systems. Working knowledge of Forward Area Targeting Systems, Target Alert Data Display Systems, and IFF. Experienced utilizing TMDE equipment to include VOMs, oscilloscopes, AF/ RF generators, transceiver analyzers, frequency counters, FDRs, TDRs, SWR meters and antenna analyzers. Experienced supervising personnel to complete mission. In-depth knowledge of electronic switching systems. Experience with Special Test Equipment - Advanced Diagnostic Interface Tool (ADIT)[Portable Maintenance Aid (PMA-based)], Deployed Automated Test Set (DATS), and BUS Interface Global Monitor and Control (BIGMAC)
Skills
Army, basic, bridges, inspection, Inspects, Marconi, Office, Radar, multi-meters, oscilloscopes, personnel, radio, Read, Safety, signal generators, Telephone, troubleshooting, VHF
Additional Information
- SUMMARY Active DOD Secret clearance (12 Jan 2011) and current US passport. (20 Jan 2011) US Army 12B (Combat Engineer), US Army 12H (Construction Engineering Supervisor) 24 years hands-on experience installing hardware and software programs to enable integrated communication systems used to accommodate command, control, and information purposes. Subject Matter Expert (SME) at developing vertical, road, bridges and airfield construction and rigging, bridging, and demolition activities. Experienced with electronic integrated communications, radar and navigational systems. Working knowledge of Forward Area Targeting Systems, Target Alert Data Display Systems, and IFF. Experienced utilizing TMDE equipment to include VOMs, oscilloscopes, AF/ RF generators, transceiver analyzers, frequency counters, FDRs, TDRs, SWR meters and antenna analyzers. Experienced supervising personnel to complete mission. In-depth knowledge of electronic switching systems. Experience with Special Test Equipment - Advanced Diagnostic Interface Tool (ADIT)[Portable Maintenance Aid (PMA-based)], Deployed Automated Test Set (DATS), and BUS Interface Global Monitor and Control (BIGMAC) Performed and supervised maintenance on manual, semiautomatic, and transportable communication systems. Excellent teaming skills Ability to work independently and without direct supervision Excellent written and verbal communication skills Excellent organizational, administration, and computer skills (Microsoft Office Suite 2010). Able to show past pattern of success in influencing candidates to show interest in an organization. Ability to evaluate process compliance, write/review CA/PA reports, perform root cause analysis and validate quality processes, responses, and plans. Familiarity of ISO 9001:2008 & AS9100C aviation standards and practical experience with Quality Management (QMS) internal audit processes. Experience in inspection of Aerospace Ground equipment AGE/GSE; Hazardous Waste Management programs; tool & FOD industry standards; equipment calibration procedures; general security procedures. Experienced in inspection of Aircraft ground handling/servicing; component removal/replacement; scheduled and unscheduled maintenance; Time Compliance Technical Directives (TCTD) execution. Prepares quality documentation and reports by collecting, analyzing, and summarizing information, and trends including failed process, recalls, corrective actions, and validations. Able to identify and understand non-conformities, procedural breakdowns, and/or program (process) audits.
- AWARDS AND ACCOMPLISHMENTS 3) Good Conduct medals 2) Achievement medals 4) Oversees Deployment ribbons F-22 oxygen sensor modification, 2012
DISCLAIMER
Resumes, and other information uploaded or provided by the user, are considered User Content governed by our Terms & Conditions. As such, it is not owned by us, and it is the user who retains ownership over such content.
How this resume score could be improved?
Many factors go into creating a strong resume. Here are a few tweaks that could improve the score of this resume:
Resume Strength
- Completeness
- Formatting
- Word choice
- Measurable results
- Clear contact info
- Typos
Resume Overview
School Attended
- University of *Strong Vincent HS
Job Titles Held:
- Construction Engineering Supervisor
- Combat Engineer
Degrees
- Diploma : 2001
Intermediate Electronic Principles, Keesler AFB, MS, 2010 *Telephone Central Office Repair, 1987 *HAZMAT Familiarization/Safety Transport, 2007 *Forward Area Alerting Radar Repairer, 1990
Similar Resumes
