Maintain operation of machine Model 7.5 & 7.2 Murata winding with CBF continues bobbin feed Maintaining 32 machines making change over from different yarn counts Print labels for product running Monitor proper function's of machine and quality.
December 2014
to
January 2015
Mundy MachineBessemer city , SCPart's Finisher Take Down
Pull Rack,s from oven push rack,s to cool down room inspect.
Bring rake,s from cool down room inspect Pull plugs.
Drill strew Hole,s using 18 volt DeWalt Drill Or Re-tap if needed.
place deer part,s in Deer tote by separating each part to prevent Damage in Transit.
Take down part,s from rack,s count and inspect touch up with paint if needed.
Place parts on pallet and shrink wrap take part.s to shipping.driving forklift may have to build long pallet for some part,s
Volkman Twister Tech overhauler Fixer overhaul Replaced worn and broken parts such as belt's spindles and foot pedals for brake on spindle installed new or rebuild if needed and make adjustment.
replaced pot lid part's.
pot's and Boot's replaced gt; greased Bearing's or change and installed bearing cap's or half moon's on drive shaft underneath.
Install new machines If per-chested or moved machinery from one department to another.
use cutter tool for lap's clean machine when overhauling.
Fixer Overhauler on # Murata Winder each with 22 spindles Model 7,2 Linkconer with CBF, Continuous bobbin feed.
gt; Set up Verified adjustments with Gauges and instruments such as hand tools and power tools Voltage and calibrating machines Replaced worn and broken parts such as bushings,bearings,gears,pulleys,conveyors belts and conveyor parts observe machine operation and signal lights to detect machine malfunction and or spindle or CBF.
Install plumbing fixtures in new and existing homes and pulled water test as completed for inspection.
load and unload box truck with plumbing fixtures to be installed.
January 2004
to
January 2009
Falapco IncConcord, SCPlumber/Trim/Truck leader
Install plumbing fixtures in new and existing homes and pulled water test as completed for inspection.
load and unload box truck with plumbing fixtures to be installed.
Maintain accurate records out in the field as truck leader.
2 or more trims a day and service work.
January 2003
to
January 2004
B & M WindingClover, SCMillwright/Technician
Tear down textile equipment and machines.
Prepare equipment for shipping forklift exp.
Over-hailing spinning/winding/card-room.
January 2000
to
January 2003
Estes Express LinesCharlotte, SCDockworker/Switcher.
Ottawa Switcher duties, moved trailers around dock for loading and unloading inbound and outbound freight 28 foot and doubles 48 foot 53 foot and containers.
Read manifest and followed oral instructions to determine materials and containers to be moved as dock lead man check for miss load's close out trailers send paperwork to dispatcher.
Loaded and unloaded freight,check weight of shipment and damage secured freight to prevent shifting in transit use.
January 1999
to
January 2000
American & E-frid, IncBessemer City, SCPre-lube/ Coba/winding Fixer
Set up adjust yarn manufacturing and processing machines
Verify adjustments with gauges- HOT-WAX-
Replace worn and broken parts, assemble and install equipment with hand tools.
