truck driver resume example with 7+ years of experience

Jessica Claire
  • , , 609 Johnson Ave., 49204, Tulsa, OK 100 Montgomery St. 10th Floor
  • Home: (555) 432-1000
  • Cell:
  • :

I am a well rounded welder fabricator. I have been a high pressure XRay welder with the boiler makers for 6 years. I have welded various metals with various welding processes in all positions, in all climates. I have worked at heights exceeding 100’, confined spaces, in the rain, snow, heat, cold, inside, outside. I have osha 10/30, osha certified for scaffold erecting and dismantling, steel erecting and dismantling, crane signaling, heavy rigging. I am the type of employee that will get the job done on time and on budget every time no matter the conditions. I can preform any job put before me with confidence And quality in a timely manner. I can operate equipment, overhead gantry hoist, I can work with any crane, I can read and draw blueprints for fabrication and rigging applications. I come from a welding fabrication background my father was a welder fabricator during my childhood and he taught me a lot about the industry, I have learned more from my experience and I will make a great asset to any situation placed before me.

  • Cargo Handling
  • Tanker and Hazmat Endorsements
  • Clean MVR
  • Route Management
  • State and Federal Regulations
  • Problem Solving
  • Problem-Solving
  • Cargo Security
  • GPS Applications
  • Dangerous Goods Transportation
  • Loading and Unloading
  • Vehicle Defect or Damage Reporting
  • Payment Collection
  • Heavy Lifting
  • Truck Weighing
  • Tractor-Trailer Operation
  • Time Management
  • Adaptability and Flexibility
  • Delivery Instructions Verification
  • Vehicle Inspection
  • Truck Cab Computer Operation
  • Work Logging
  • Map Reading
  • Safety and Emergency Equipment
  • Decision Making
  • Accident Documentation
  • Process Monitoring
  • Critical Thinking
  • Truck Maneuvering
  • Trailer Coupling and Uncoupling
  • Attention to Detail
  • Delivery Documentation
  • CB Radio Communication
  • Vehicle Service Documentation
  • Dependable and Reliable
  • Air Brake Certification
  • Efficient Trip Planner
  • Doubles and Triples Specialist
  • Planning Ability
  • Trained in [State] Safety Regulations
  • Courteous and Polite Demeanor
  • Design Interpretation
  • Brake Press Operation
  • Pipe Welding
  • Stick Welding
  • Flux Core (FCAW) Welding
  • TIG Welding Expert
  • Filler Rod Selection
  • Equipment Selection
  • Workpiece Examinations
  • Micrometers and Calipers
  • Flat Welding Position
  • Mathematical Calculations
  • Power Tools Operation
  • Torch Installation
  • Welding Techniques
  • Specification Conformance
  • Gas Flow Adjustments
  • Overhead Welding Position
  • Stainless Steel Metal Welding
  • Edge Joining
  • Solder Application
  • Torch Selection
  • Brakes and Shears Operation
  • Workpiece Measurements
  • Hand and Power Tool Operation
  • Straightedge Measurements
  • Vertical Welding
  • Flux Selection
  • Surface Material Preparation
  • Defective Material Identification
  • Sheet Metal Fabrication
  • AWS Certified
  • Defect Repair
  • Jig Fabrication
  • Weld Inspections
  • Welding Procedure Verification
  • MIG Welding
  • TIG Welding
  • Gas Metal Arc Welding
  • Shop Drawings
  • Material Costing
  • Shielded Metal Arc Welding
  • Flux Core Arc Welding
  • Post-Welding Treatment
  • Job Orders
  • Precision Measurement
Truck Driver, 01/2022 to 06/2023
Andersen CorporationBayport, NY,
  • Demonstrated safe driving by observing road rules, exercising caution in unfamiliar areas and maintaining vehicle control.
  • Inspected truck for defects and safe operating condition before, during and after trips.
  • Loaded, balanced and secured product to safely transport goods.
  • Logged driving hours and fuel usage data on time to keep reports current.
  • Conducted vehicle inspections before and after every trip and performed minor repairs to keep truck functional.
  • Read and interpreted maps to determine vehicle routes.
  • Maintained telephone and radio contact with supervisor to receive delivery instructions.
  • Hooked and unhooked trailers from tractor and converter dollies.
  • Delivered customer orders to homes and places of business within established time frames.
  • Drove tractor-trailer combinations to transport and deliver products, livestock or other materials.
  • Established relationships with customers through use of interpersonal, active listening and inquiry response skills.
  • Provided top product shipment delivery quality control, eliminating downtime and maximizing revenue.
  • Retained valid proof of insurance and registration in vehicles.
  • Utilized pallet jacks and forklifts to load and unload materials off trucks.
  • Used ropes and blocks to safely secure cargo for transport.
  • Completed transfers at hubs and final destinations to keep routes on schedule.
  • Conducted emergency roadside repairs, changed tires, replaced light bulbs and installed fuses and tire chains.
  • Maintained safe driving habits to protect property and general public on roadways.
  • Observed driving regulations and safety procedures, maintaining excellent safe driving record.
  • Worked well with dispatchers to communicate route and schedule changes.
  • Inspected trucks and trailers before and after trips and completed basic maintenance for optimal performance.
  • Conducted daily DOT pre-trip inspections according to set checklist.
  • Added fluids, checked tires and kept interior and exterior spotless as part of vehicle upkeep.
  • Performed pre- and post-trip safety and maintenance checks to mitigate hazards.
  • Maintained vehicle logs, records of cargo, or billing statements in accordance with regulations
  • Promoted positive customer service by delivering on-time shipments and fully resolving issues.
  • Inspected and maintained vehicle supplies and equipment to ensure vehicles remain in proper working condition.
  • Obtained signatures needed to complete and process paperwork.
  • Planned efficient routes and adjusted strategies based on current weather and traffic information.
  • Processed shipment documents neatly and efficiently for each load.
  • Updated logs with timely and accurate information meet internal requirements and DOT recordkeeping demands.
  • Managed unexpected emergencies and route changes with calm and professionalism.
Fabrication Welder, 01/2017 to 06/2023
ChromaloxHouston, TX,
  • Read and followed blueprints and weld diagrams.
  • Used jigs, fixtures and tools for assembly of parts and components.
  • Made steel form parts using various cutting equipment and welded part together per specifications.
  • Deposited intermittent tack welds for fit-up and alignment of work assemblies.
  • Checked cut length frequently for deviation in cut length specs.
  • Informed forklift personnel or Shift Lead when running low on fab stock requiring welding.
  • Stacked finished product on pallets according to packaging standard.
  • Checked angle of pipe on angle table.
  • Fabricated steel molds for concrete using hand and power tools, welding operations and lifting equipment.
  • Welded components in flat, vertical or overhead positions.
  • Welded fabrication materials, continuously checking for safety and quality.
  • Prepared workpiece edges by grinding, cutting, buffing or bending to verify snug fit.
  • Prepared material surfaces for welding by removing scale, rust or other foreign matter.
  • Adjusted weld machines to correct settings for precision and waste reduction.
  • Produced work using appropriate welding techniques, metallurgy knowledge and engineering requirements.
  • Aligned and clamped workpieces using rules, squares or hand tools.
  • Positioned and clamped workpieces together and properly assembled in jigs and fixtures.
  • Cut, contoured and beveled metal and structural shapes to achieve accurate dimensions.
  • Measured workpieces with straightedges or templates to conform with specifications.
  • Positioned and secured workpieces using hoists, wire and banding machines or hand tools.
  • Recognized, set up and operated shielded metal arc and gas metal arc welding equipment.
  • Detected faulty operation of equipment or defective materials and notified supervisors.
  • Determined equipment and welding methods, applying knowledge of metallurgy, geometry and welding techniques.
  • Marked or tagged material with job number, piece marks and other identifying marks.
  • Cleaned and inspected parts and assemblies at each production stage and documented production defects.
  • Safely ignited torches and monitored surroundings to proactively identify hazards.
  • Selected and installed torches, filler rods and flux according to welding chart specifications.
  • Connected and turned regulator valves to activate and adjust gas flow and pressure and obtain desired flames.
  • Melted and applied solder along adjoining edges of workpieces to solder joints.
Mechanic, 01/2016 to 01/2017
Waukesha CountyWaukesha, WI,
  • Monitored shop equipment to maintain safe working condition.
  • Assessed vehicles or machinery to accurately diagnose and repair issues.
  • Kept detailed records of repairs, labor involved and parts used.
  • Maintained garage safety protocols to meet regulatory and company expectations.
  • Executed preventive and corrective maintenance on work trucks and other vehicles.
  • Examined loose bolts and specified safety devices on vehicles and made adjustments.
  • Diagnosed and repaired vehicles during road call situations.
  • Connected electrical wiring to control panels and electric motors.
  • Engaged with customers to determine automotive requirements and communicate vehicular defects or problems.
  • Leveraged diagnostic tools and equipment to identify vehicle issues.
  • Attended safety and training meetings to learn techniques to avoid injuries and mishaps.
  • Conveyed troubleshooting diagnosis to customer and outlined proposed repair plan and associated costs.
  • Completed required paperwork and delivered to customer.
  • Interpreted drawings and schematics to pinpoint sources of mechanical issues.
  • Performed maintenance inspections, tune-ups, oil changes and other key services.
  • Repaired, replaced and adjusted brakes.
  • Conducted test drives before and after repair services.
  • Removed old oil, replace filters and added correct amount of new [Type] oil.
  • Performed troubleshooting and diagnostic procedures to locate source of malfunctions.
  • Used diagnostics and troubleshooting tools to identify failures and equipment issues.
  • Completed simple and advanced repairs according to specifications for brakes, exhaust and electrical systems.
  • Improved function of engines by replacing spark plugs, fuel filters and defective sensors.
  • Inspected vehicles for damage and recorded findings to facilitate repairs.
  • Completed standard inspections to assess wear and damage to vehicles.
  • Reviewed brakes and assessed whether pads needed replacement, discs should be turned or other service requirements.
  • Checked vehicle mileage and determined necessary belts, fluids flushing or gasket replacements.
  • Reviewed work orders and discussed with supervisors.
  • Adjusted and repaired systems to meet manufacturers' performance specifications.
  • Conferred with customers to obtain descriptions of vehicle problems and discuss work or future repair requirements.
  • Estimated costs of vehicle repair.
  • Evaluated vehicle schematics to assess required parts and order accordingly.
  • Aligned wheels using special alignment equipment and wheel-balancing machines.
  • Tested components and systems using infrared engine analyzers, compression gauges and computerized diagnostic devices.
  • Trained and guided employees on correct methods for performing different repairs and maintenance services.
  • Planned work procedures using charts, technical manuals and experience.
Education and Training
High School Diploma: , Expected in 03/2015 to Phillip Barbour High School Complex - Philippi, WV,

By clicking Customize This Resume, you agree to our Terms of Use and Privacy Policy

Your data is safe with us

Any information uploaded, such as a resume, or input by the user is owned solely by the user, not LiveCareer. For further information, please visit our Terms of Use.

Resume Overview

School Attended

  • Phillip Barbour High School Complex

Job Titles Held:

  • Truck Driver
  • Fabrication Welder
  • Mechanic


  • High School Diploma

By clicking Customize This Resume, you agree to our Terms of Use and Privacy Policy

*As seen in:As seen in: