To anchor a situation with a strong organization using my abilities and resources acquired through my work encounters Profile Tenacious, conscientious individual with HVAC knowledge with a strong foundation in the environmental health and safety industry. Exceeds expectations at performing multiple tasks in a quick paced condition, finishes undertakings and deadlines in a timely and stressful manner. Solid hard-working attitudes and adaptable timetable.
Responded to and initiated proper corrections to process alarms.
Made sound and logical judgments regarding process changes.
Directed routine preventative maintenance such as adjustments, cleaning and painting equipment.
Closely inspected equipment for safety problems, leaks and wear and tear.
Read automatic gauges at proper intervals to determine flow rate of gas.
Reviewed daily computer log and reported any inaccuracies in process board.
Documented and recorded critical metrics in database related to pressure, temperature, level and flow data to maintain and update accurate repair logs.
Trained new operators and implemented new division operator training program to improve retention rates and increase production.
Maintained current knowledge about latest operating and maintenance practices with continuing education courses.
Interpreted results of process control analysis and made adjustments to optimize plant performance.
Gauged and recorded daily tank inventory.
Completed maintenance tasks and made adjustments as part of regular upkeep of equipment and safety.
Communicated effectively with operators and supervisors on technical level.
Operated consumer water demand and distribution system control equipment.
Performed quality control tests on lab equipment and lab analyses.
Maintained proper chemical inventories.
Followed applicable regulations, including EPA and OSHA to maintain safety of water and all personnel.
Collected samples to assess water quality, including tests for pH, hardness and sediment levels.
Recorded all operating data on daily work sheet from laboratory analysis and flow metering equipment.
Monitored process units and quality control testing performance for plant processes and water quality sampling.
Executed field service work with little to no supervision, including water main and hydrant repairs, valve maintenance and water meter change-outs.
Started up, shut down and checked water and wastewater treatment processes.
Measured out chemicals like ammonia and chlorine for use in disinfecting water.
Performed tests and maintenance using specific instruments, equipment and tools.
Routinely drained unwanted fluids.
Ran and washed filtration process units.
Maintained correct temperature, levels and pressures on process systems and equipment.
Used SCADA system to maintain appropriate levels.
02/2016 to 03/2021
Service TechnicianAramark Corp. – Cullowhee, NC,
Maintain all HVAC system throughout the hospital.
Check temperature, troubleshoot, restarting, blow downs, flushes, adjustments, and proper steam pressures to all water heaters and boilers.
Fill values, flush meters, saw, or weld angle stops, wax rings, remove toilets and usage of snake when line backed up or report to all plumbing issues.
Repair and replacing sings for patient rooms.
Troubleshoot all shower repairs such as repair and replace shower heads or bed pans, unclogging lines, and mixing values hot and cold.
Repair oxygen suctions and vacuum stations.
Perform PMS’s and changing stations.
Perform oil changes, changing belts, pressure reading, and no water in hospital tanks, and med air pumps.
Report to management and respond to all calls in a timely manner.
05/2014 to 02/2016
Service TechnicianAramark Corp. – Evanston, IL,
Maintaining medical and conventional building equipment: boiler, steam system, disease generators, air compressors and vacuum pumps, chillers, heat exchangers, circulation pumps, plumbing, medical gas system, elevators, low voltage electrical systems, air handlers and exhaust systems, all associated HVAC equipment including the operation of the energy management system and calibration of direct digital controls.
Responds to fire alarms and any building or utility related emergencies.
Repair fire dampers located on Blueprints
Replacing Drywall/Patching and painting patient rooms and operations rooms
Keep up and knowledge and comprehension of Blueprints enough to perform competently per department and their expectations
Provide services using Environment Containment Unit to prevent the spread of dust and asbestos
Removal and/or repair of existing insulation and replacement using Astro foil insulation liner
Plumbing repair/replacing, vacuum breakers, flush meter, snake drains, repairing faucets, check valves, troubleshooting domestic water systems
Conducts rounds, per department schedule to assess and document the performance and condition of plant equipment which includes, pumps, motors, equipment pressure levels, and temperature
Report to Chief of Engineering on daily basis to discuss upcoming projects and deadlines
Understanding client concerns which builds trust and customer satisfaction.
03/2002 to 05/2014
Service TechnicianMintie Corporation – City, STATE,
Visual inspection of the HVAC system, including; Air Handler (interior insulation, supply fan, fan blades, fan plenum, coils, condensate pan, filters, and metal surfaces) and the distribution system; ductwork, VAV’s, reheats, diffusers to determine the optimal approach to servicing the system.
Debris collection with HEPA filtered vacuums to prevent dust borne particle dispersion outside the HVAC system.
Comprehensive cleaning, including; HEPA vacuuming, washing, hand wipe down and fogging with EPA antifungal agent where required.
Restoration of system components, including; wire brushing, HEPA vacuuming, rust reforming, painting of exposed metal surfaces, removal and/or repair of existing insulation and replacement using Astro foil insulation liner
Plenum and interstitial space cleaning and decontamination usage of HEPA filtered vacuums; to clean the pipes, conduits, exterior ductwork, vertical walls, and other structural and utility component surfaces.
Ceiling cavity condition control and maintenance.
Identify and maps the location of all fire damper assemblies on facility mechanical blueprints.
Manually inspects and tests all fire dampers and adds duct access panels where necessary
Identifies and reports all fire damper assemblies that are damaged and in need of repair or replacement
Cleans and lubricates each fire damper (as required), and ensures that none of the fire dampers are left permanently wired in open position
Experience in usage of boilers, diesel engines, turbines, pumps, condensers, generators, and compressors
Respond to other minor duties such as: wielding, plumbing, electrical repair, and carpentry
Provides all necessary infectious material containment support services
Report to all job-sites in a timely and professional manner.
Resumes, and other information uploaded or provided by the user, are considered User Content governed by our Terms & Conditions. As such, it is not owned by us, and it is the user who retains ownership over such content.
