Senior Technician Resume Example National Instruments

SENIOR TECHNICIAN

Experience

Senior Technician, 05/2011 to Current
National Instruments – Austin, TX

Product Safety.
Served as Safety Technical Electronic Technician in Compliance Lab.
Conducted build, test, repair troubleshoot, problem solver, and modify tasks on Electrical Components and Measurement System.
Manage compliance resources; calibration, test bed, equipment maintenance.
Debug 80% and analyze problems and recommend about 50% appropriate solutions.
Self-motivated, and have advanced problem-solving and troubleshooting skills.
Independently and successfully leads 72% projects/feature through compliance.
Chosen from pool of 6 technicians to work as Laboratory Calibration and Consumables Lead Personal.
Exceeded company standards by sustaining 90% performance-to-goals rating across compliance department.
Completed at 100% Compliance Accreditation for Project and Business needs.
100% responsible for Compliance Lab Calibration Equipment and Compliance Lab Consumable for business needs.
Cross Trained 3 Technicians as back up in Safety Lab.
Prepared 10% if weekly assessment of key projects to ensure efficient operation.

Qualified Technician, 01/2011 to 05/2011
MET Laboratories, Inc – Austin, Texas

Product Safety.
Worked in test lab environment testing, power supplies - accuracy.
100% Debugging, and documentation of test results.
Provide work technical support to staff members and 10% of customer support.
Perform 80% of work independently and as part of a team.
Perform 90% safety testing, generate test documentation, and ensure that all test station hardware and software and the latest product safety requirements for testing.
Prepared weekly assessments of key electronic systems to ensure efficient operations.
Tested all new systems and adhered to quality control procedures.
Performed troubleshoot on electronic systems and performed repairs on 90% of systems.
Performed troubleshoot on electronic systems and performed repairs.
Certified under the ACTL Cert.

Technician/Analyst - Product Safety Lead Technician, 01/2004 to 01/2011
Dell Inc – Austin, Texas

Team Leadership of Product Safety Lab and Responsible for working 25% on special assignments and 30% of Engineering, 30% Compliances and 15% of Prototype projects.
Primary responsibility is to set-up, configure 50% of test systems, and 50% of test prototype systems and operating system software.
Perform specified 10% test plans and functional testing and analysis of newly developed systems to ensure operation and reliability.
Managed scheduling and prioritizing of daily tasks within Safety Team.
As Lead Tech, ordering lab supplies, purchasing Safety Lab equipment, and Ensure Equipment Calibration and responsible for Operating General Lab Equipment;.
As Lead Tech, Maintain Lab Accreditation for year and review and assist in managing Quality System Document Management.
Certified to UL 60950-1 Edition, UL 60950-1 2nd Edition, UL -94, UL-1439, NFPA99, A.1- Flammability Standards.
Certified in A.2-Flammability, A.3 Hot Flaming Oil, and IEC 60695 - Glow Wire Testing.
As lead Tech, insured that Product Safety Lab was Certified to ISO 17025 Standard And Maintain UL, TUV, CSA, Nemko Certifications and that Product Safety Lab is under CB Scheme.

PG Test Technician Specialist, 04/2003 to 01/2004
Dell Inc – Austin, Texas

Compliance EMC Testing.
Collected information, compile data and perform 65% of data input that was retrieval from the workstation terminal.
The cost saved the department about $95k on this key project that was due at the end of the quarter.
Constructed, troubleshooting and testing prototype assemblies.
Analyzing and maintaining about 72% of system data for priority projects.
Set up, configure, and test hardware and software products for about 35% internal customers.
Assemble and disassemble about 60% of test configurations.
Learn and train techs on new products, technologies and procedures with current with industry.
Standards.
Completed about 28% functional testing and analysis of newly developed products to ensure operation and reliability.

Test Technician, 10/1994 to 06/2002
Applies Materials – Austin, Texas

Producer Final Integration Test Technician/ Training Focal.
Centura/HDP Final Integration Test Technician, System.
Validation Engineering Technician.
Final Test Engineering Technician.

HDP Chamber Module Test TechnicianApplied Materials – Austin, TX

Transitioned from Producer Integration to becoming a Chamber Test Tech within 6months.
Tests and troubleshoots various HDP's Chambers with 7months.
Collects various data on troubleshooting techniques for a variety of Chambers.
Performs reliability tests, isolated problems and repaired them.
Responsible for the hand on training of new personnel and the monitoring/direction of their progress towards certification.
Reduce build time within 30days on HDP Chambers by expanding floor space to add more parts.
Improved the process, learning cure, cutting cost by 18%, and improving our knowledge on the Testing Floor.
Certified Emergency Response Team (ERT) member and team safety focal.

Producer Final Integration Test Technician/Training FocalApplied Materials – Austin, Texas

Developed test program for the Producer System.
Drove debug and validation activities and data collection down by 25%.
Provided guidance in troubleshooting system failure to their root causes.
Documented all maintenance activities in the appropriate log/ database for the month timeframe.
Transitioned Producer Final Integration from Santa Clara, CA.
To Austin, TX with 3weeks.
Performed real-time support including; Internal Customer, System Troubleshooting, and bay maintenances.
Assisted the Engineering Team in developing document for the transition;.
Reduced test cycle time in Producer Final Test significantly by 58%.
By implementing a process where modules of the system would be tested in final Integration.

Centura/HDP Final Integration Test TechnicianApplied Materials – Austin, Texas

Rebuild an electromechanical and process chamber integration, at the end-of-line testing, wiring Experience and troubleshooting on the Centura TM 5200 CVD platform.
Utilized Exceptional process development and continuous improvement skills for team members.
Demonstrated leadership situations.
Detailed involvement in previous Product transition of system validation to final test, and integration within 6month period.

System Validation Engineering TechnicianApplied Materials – Austin, Texas

Technical resource in the test and operation of the Centura TM 5200 CVD Tools.
Utilized 0 Defects Controls (ZDC) methods for the testing and validation of the Centura TM.
Became and Emergency Response Team ALBERTA member and team safety focal.
Utilized sophisticated tools and programs for the testing of the system.
Identified and provided closed loop corrective action feedback to Manufacturing Engineering respecting system non-conformances within each month.
Achieved a discrepancy rate of 0 defects per system and a 37% reduction in Final Test Cycle time.

Final Test Engineering TechnicianApplied Materials – Austin, Texas

Tested and troubleshot various electrical and mechanical modules.
Read and interpreted schematics to pinpoint locations of problems within a 1hour.
Performed reliability tests, isolated problems, and repaired them.
Interfaced with customer representatives on a regular basis.

Work History

Senior Technician, 05/2011 to Current
Austin, Texas

Product Safety.
Served as Safety Technical Electronic Technician in Compliance Lab.
Conducted build, test, repair troubleshoot, problem solver, and modify task on Electrical Components and Measurement System.
Manage compliance resources; calibration, test bed, equipment maintenance.
Debug 80% and analyze problems and recommend about 50% appropriate solutions.
Self-motivated, and have advanced problem-solving and troubleshooting skills.
Independently and successfully leads 72% projects/feature through compliance.
Chosen from a pool of 6 technicians to work as Laboratory Calibration and Consumables Lead Personal.
Exceeded company standards by sustaining a 90% performance-to-goals rating across the compliance department.
Completed at 100% Compliance Accreditation for Project and Business needs.
100% responsible for the Compliance Lab Calibration Equipment and Compliance Lab Consumable for the business needs.
Cross Trained 3 Technicians as back up in the Safety Lab.
Prepared 10% if the weekly assessment of key projects to ensure efficient operation.

Qualified Technician, 01/2011 to 05/2011
MET Laboratories, Inc – Austin, Texas

Product Safety.
Worked in test lab environment testing, power supplies - accuracy.
100% Debugging, and documentation of test results.
Provide work technical support to staff members and 10% of customer support.
Perform 80% of work independently and as part of a team.
Perform 90% safety testing, generate test documentation, and ensure that all test station hardware and software and the latest product safety requirements for testing.
Prepared weekly assessments of key electronic systems to ensure efficient operations.
Tested all new systems and adhered to quality control procedures.
Performed troubleshoot on electronic systems and performed repairs on 90% of systems.
Performed troubleshoot on electronic systems and performed repairs.
Certified under the ACTL Cert.

Technician/Analyst - Product Safety Lead Technician, 01/2004 to 01/2011
Dell Inc – Austin, Texas

Team Leadership of the Product Safety Lab and Responsible for working 25% on special assignments and 30% of Engineering, 30% Compliances and 15% of Prototype projects.
Primary responsibility is to set-up, configure 50% of test systems, and 50% of test prototype systems and operated the system software.
Perform specified 10% test plans and functional testing and analysis of newly developed systems to ensure operation and reliability.
Managed the scheduling and prioritizing of daily tasks within the Safety Team.
As the Lead Tech, ordering lab supplies, purchasing Safety Lab equipment, and Ensure Equipment Calibration and responsible for Operating General Lab Equipment;.
As the Lead Tech, Maintain Lab Accreditation for the year and review and assist in managing the Quality System Document Management.
Certified to UL 60950-1 Edition, UL 60950-1 2nd Edition, UL -94, UL-1439, NFPA99, A.1- Flammability Standards.
Certified in A.2-Flammability, A.3 Hot Flaming Oil, and IEC 60695 - Glow Wire Testing.
As the lead Tech, insured that the Product Safety Lab was Certified to the ISO 17025 Standard And Maintain the UL, TUV, CSA, Nemko Certifications and that the Product Safety Lab is under the CB Scheme.

PG Test Technician Specialist, 04/2003 to 01/2004
Dell Inc – Austin, Texas

Compliance EMC Testing.
Collected information, compile data and perform 65% of data input that was retrieval from workstation terminal.
Cost saved the department about $95k on this key project that was due at the end of the quarter.
Constructed, troubleshooting and testing prototype assemblies.
Analyzing and maintaining about 72% of system data for priority projects.
Set up, configure, and test hardware and software products for about 35% internal customers.
Assemble and disassemble about 60% of test configurations.
Learn and train techs on new products, technologies and procedures with current with industry.
Standards.
Completed about 28% functional testing and analysis of newly developed products to ensure operation and reliability.

Test Technician, 10/1994 to 06/2002
Applies Materials – Austin, Texas

Producer Final Integration Test Technician/ Training Focal,.
Centura/HDP Final Integration Test Technician, System,.
Validation Engineering Technician,.
Final Test Engineering Technician.

HDP Chamber Module Test Technician,

Transitioned from Producer Integration to becoming a Chamber Test Tech within 6months.
Tests and troubleshoots various HDP's Chambers with 7months.
Collects various data on troubleshooting techniques for a variety of Chambers.
Performs reliability tests, isolated problems and repaired them.
Responsible for the hand on training of new personnel and the monitoring/direction of their progress towards certification.
Reduce build time within 30days on HDP Chambers by expanding floor space to add more parts.
Improved the process, learning cure, cutting cost by 18%, and improving our knowledge on the Testing Floor.
Certified Emergency Response Team (ERT) member and team safety focal.

Producer Final Integration Test Technician/Training Focal, Applied Materials – Austin, Texas

Developed test program for the Producer System.
Drove debug and validation activities and data collection down by 25%.
Provided guidance in troubleshooting system failure to their root causes.
Documented all maintenance activities in the appropriate log/ database for the month timeframe.
Transitioned Producer Final Integration from Santa Clara, CA.
To Austin, TX with 3weeks.
Performed real-time support including; Internal Customer, System Troubleshooting, and bay maintenances.
Assisted the Engineering Team in developing document for the transition;.
Reduced test cycle time in Producer Final Test significantly by 58%.
By implementing a process where modules of the system would be tested in final Integration.

Centura/HDP Final Integration Test Technician, Applied Materials – Austin, Texas

Rebuild an electromechanical and process chamber integration, at the end-of line testing, wiring Experience and troubleshooting on the Centura TM 5200 CVD platform.
Utilized Exceptional process development and continuous improvement skills for team members.
Demonstrated leadership situations.
Detailed involvement in previous Product transition of system validation to final test, and integration within 6month period.

System Validation Engineering Technician, Applied Materials – Austin, Texas

Technical resource in the test and operation of the Centura TM 5200 CVD Tools.
Utilized 0 Defects Controls (ZDC) methods for the testing and validation of the Centura TM.
Became and Emergency Response Team ALBERTA member and team safety focal.
Utilized sophisticated tools and programs for the testing of the system.
Identified and provided closed loop corrective action feedback to Manufacturing Engineering respecting system non-conformances within each month.
Achieved a discrepancy rate of 0 defects per system and a 37% reduction in Final Test Cycle time.

Final Test Engineering Technician, Applied Materials – Austin, Texas

Tested and troubleshot various electrical and mechanical modules.
Read and interpreted schematics to pinpoint locations of problems within an 1hour.
Performed reliability tests, isolated problems, and repaired them.
Interfaced with customer representatives on a regular basis;.

Accomplishments

ISO 17025/NAVLAP Handbook 150 Lab Compliance Experienced.
EMC, Product Safety, Testing Experience.
REACTOR User and Jira Database.
Electronics and Troubleshooting.
Electronics Repair and Soldering.
Test Equipment Activities.
The Sims/Sims 4 Gamer, Miniature Model Trains Connector, Miniature Model 18- Wheeler Truckers Connector, CXC Simulators (Motion PRO II) Racer and 18-Wheeler: American Pro Trucker Arcade Driver.

Education

Associate of Applied Science: Electronics Engineering Technology, 1993
DeVry Institute of Technology - Austin, NV

Summary

And 61010 Standards. Committed to delivering cost- effective electronics solutions. Professional Summary 22 years of experience as an Electronics Technician. Skilled in installation and repair. Seeking to raise the bar on requiring skills and knowledge in build, test, inspection, repair work and troubleshooting. At National Instruments, exceeded company standards by sustaining a 90% performance-to-goals rating across the compliance department. Chosen from a pool of 6 technicians to work as Laboratory Calibration and Consumables Lead Personal. Core Qualifications Vast experience writing test reports and identifying potential efficiency upgrades and safety hazards. Extensive familiarity with Safety Standards (60950 and 61010) and Regulations. Proficient in the use of safety equipment (AC and DC power sources, OSC, Leakage Meters, Capacitor Discharge Tester, Multimeters, Current Clamps, Dielectric Withstand Tester up to 20K_VAC/VDC, Ground Bond Tester, Power Logger, Electronic Loads, Infrared Meter, Transformer, Mechanical Tools, Calipers, Chambers, and Thermocouples Meter/Modules. Summary of Qualifications
Certified UL approved Technician for 60950-1, 61010 and Hazloc Test.

Certifications

CompTIA A+,

Certified Electronics Technician (CET) - ETA International (Re-testing under 3rd Edition)

Languages

Speak - German and English, Client-facing Operations, and Project

Highlights

Management, Experience working with
High-power systems, controls, and software testing, Experienced in writing procedures and work instructions
And Experience with NI Lab-View Software, Highly motivated by Customer Service with high attention to
Details. Microsoft Office, Electronic Controls, Troubleshooting. Adept Fundamental Electronical Maintenance
Installing and repairing various electronics systems and components. Experience in IT and Measurement
Equipment and Extensive Understanding of Safety 60905
Circuit Analysis Electronic Devices,
Communication Systems,
Digital/Data Systems,
Microprocessor Systems and Controls,
Digital Electronics
Soft Skills:
Software: Microsoft Office, Fluke Software, and Lab-View.
Online Udemy.Com Training, Austin, Texas
A+, Managing, Software testing
Back up, Mechanical, Technical support
Calibration, Microprocessor, Technician
Com, Microsoft Office, Troubleshoot
CA, Network, Troubleshooting
Hardware, Oil, Validation

Continuous improvement, Personnel, Wiring
Client, Power supplies
Customer Service, Problem solver
Customer support, Problem-solving
Data collection, Process development
Database, Producer
Debugging, Progress
Digital Electronics, Project Management
Direction, Purchasing
Document Management, Quality
Documentation, Quality control
Electronics, Read
English, Real-time
Equipment maintenance, Repairs
Functional, Repairing
German, Safety
ISO, Scheduling
Lab-View, Schematics
Leadership, Scheme
Team Leadership, Self-motivated

Skills

Management, Experience working with

High-power systems, controls, and software testing, Experienced in writing procedures and work instructions

And Experience with NI Lab-View Software, Highly motivated by Customer Service with high attention to

Details. Microsoft Office, Electronic Controls, Troubleshooting. Adept Fundamental Electronical Maintenance

Installing and repairing various electronics systems and components. Experience in IT and Measurement

Equipment and Extensive Understanding of Safety 60905, Circuit Analysis Electronic Devices,

CCommunication Systems,

DDigital/Data Systems,

MMicroprocessor Systems and Controls,

DDigital Electronics

S Soft Skills:

SSoftware: Microsoft Office, Fluke Software, and Lab-View.

Online Udemy.Com Training, Austin, Texas,

A+, back up, Calibration, Com, CA, hardware, continuous improvement, Client, Customer Service, customer support, data collection, database, Debugging, Digital Electronics, direction, Document Management, documentation, Electronics, English, equipment maintenance, functional, German, ISO, Lab-View, leadership, Team Leadership, managing, mechanical, Microprocessor, Microsoft Office, Network, Oil, personnel, power supplies, problem solver, problem-solving, process development, Producer, progress, Project Management, purchasing, Quality, quality control, Read, real-time, repairs, repairing, Safety, scheduling, schematics, Scheme, Self-motivated, software testing, technical support, Technician, troubleshoot, Troubleshooting, Validation, wiring

Resume Overview

Companies Worked For:

National Instruments
MET Laboratories, Inc
Dell Inc
Applies Materials
Applied Materials

School Attended

DeVry Institute of Technology

Job Titles Held:

Senior Technician
Qualified Technician
Technician/Analyst - Product Safety Lead Technician
PG Test Technician Specialist
Test Technician
HDP Chamber Module Test Technician
Producer Final Integration Test Technician/Training Focal
Centura/HDP Final Integration Test Technician
System Validation Engineering Technician
Final Test Engineering Technician

Degrees

Associate of Applied Science : Electronics Engineering Technology , 1993

Senior Technician Resume Example

Resume Score: 90%

Resume Overview

Create a job alert for [job role title] at [location].

Similar Resumes