SEARCH

Owner/Master Electrician Resume Example

Resume Score: 80%

Love this resume?Build Your Own Now
OWNER/MASTER ELECTRICIAN
Summary

I am a third generation IBEW JW/ Master Electrician with over 20 years of hands on experience and diverse knowledge base in industry standards and evolving technologies. Adept at many complex and diverse manufacturing processes and interlocked components. Extremely driven to solve multi tiered problems, and always looking to increase my potential buy taking continuing educational classes, diligent research or brain storming with other skilled trades men, yet humble enough to realize when to seek extra help and input from senior staff or technical support options available from vendors. I also understand the cost of down time in production and its impact on an individual company and retailers depending on specific products. Attention to detail in any process and noticing abnormalities quickly is a key factor as well as having equipment running at capacity by diligent inspection and recording events in daily routine.

Skills
  • Certifications received Union Hall -OSHA 10 and 30 hr course -Lock out tag out procedures -Arc fault protection -NFPA 70E Electrical safety work practices. -Cable termination and splices, heat shrink and cold applied terminations for medium voltage cable 5 to 35 kV -Confined space attendant or entrant -CPR, Basic first aid and AED -Fork lift, scissor lift, lull, articulating boom lift and bucket truck certification -Fall protection and leading edge safety -Lead and asbestos renovation work -Nelson fire stop proper installation -Revere Smelting and Refining 40 hr hazardous waste operations training for OSHA 1910.120 Lead refinery -NECA certified in photovoltaic installations, string monitoring, inverter installation and grounding/bonding -Fat Spaniel monitoring gateway installation of renewable energy real time powergeneration activity -Green trades program certification -Leeds project protocol certification -BICSI level 1&2 information transport system's installer (Cat 5-Cat 6e, hybrid cable and fiber optics) installation and termination -NECA & NJATC certified Telecommunication Installer & Technician -AMP ACT 1 Installer and Termination Technician of LAN cabling systems - Fire Alarm & Building Security Access certified installer -Instrumentation and Control Calibration level 1&2 EPRI certification -IBEW Journeyman Wireman diploma
  • Electrical code update and changes course annual 8 hour minimum
  • Safety awareness
  • Blueprint and schematic interpretation in majority of construction trades
  • Diagnosis and troubleshooting
  • Identifying specifications
  • Analyzing performance
  • Circuits and wiring
  • Mathematical ability
  • Testing and diagnostics
  • High voltage termination underground and ariel to 35kv. 3M and Raycam hot and cold shrink for both concentric neutral and tape shield primary cable.
  • System repair and installation
  • Installing equipment in all environmental conditions
  • Equipment maintenance
  • Coordinating project schedules
  • Motor operations
  • AC and DC motor drives
  • Transformer, disconnect switch and ground grid testing
  • Hand and power tools, analog meters, amp probes and multiple digital multi meters and testing equipment
  • Organization of documentation, daily progress logs, device manuals and specification notes and personal inventory of reference material and conversion formulas,
  • Conflict resolution
  • Decision-making
  • Team management
  • Collaboration
  • Signal generators
  • LCD, LED and OLED displays
  • Ladder Logic
  • Programmable logic controllers (PLCs) familiarity
  • Technical writing
  • Electromechanical equipment operations
  • Troubleshooting and fault isolation
  • PPE use
  • Hardware configuration
  • Equipment repair
  • Hardware upgrades
  • LAN/WAN
  • Server installations
  • Excellent researching skills
  • Proficient in HVAC installation, testing and proper evacuation and filling of freon gases
  • Plumbing experience in residential and commercial installation, domestic and waste water line installation and multiple furnace types and associated controls
Experience
Kv Electrical services | Liberty, NYOwner/Master Electrician06/2014 - Current
  • Identified client business and operational needs and introduced services to provide solutions.
  • Determined clients' immediate and future electrical, HVAC, security and IT requirements for correct system sizing and future physical accessability.
  • Ability to retain commercial customers through consistent quality installations.
  • Diversity of product knowledge through previous family owned company has allowed me to optimize work scope to include alterative heating and cooling system's including geothermal heat pump units, condensate units and freon compressor style HVAC systems. Proper BTU and A/C tonnage sizing with existing or proposed building construction provides proper system performance. Ability to do performance test, diagnostics, trouble shooting and regular maintenance for all systems listed.
  • Making sure clients understand all possible options based on extensive personal knowledge and research of continually changing technologies and device specifications in accordance with current NEC installation procedures.
  • Estimating accuracy of materials through several vendors to keep project cost competitive.
  • Generally committing to installation complement labor price vs. hourly rate so both parties are aware and in agreement with overall cost.
  • Main priorities include complete customer satisfaction. Simple task such as good house keeping and immediate response if ever system error or product failure occurs.
  • Long standing relationship with local inspection agency, and history of quality installations streamlines inspection process and allows for differing to the AHJ preference when NEC is questionable.
  • As owner/operator detailed record keeping, invoice accuracy, organization, preparation, tool availability and vehicle appearance key components to financial success.
  • Without constant administrative support staff I have and plan on continuing self education of software and increased computer and associated field device literacy and proficiency to keep competitive edge.
  • Professional conduct, integrity and surpassing customer expectations has allowed me to never actively advertise or solicit business. Word of mouth from prior clients sole source of new accounts.
IBEW LU 363 | Harriman, NYJourneyman Electrician03/2004 - 08/2019
  • In my service with the Electricians union I have worked for multiple contractors in NY and NJ. I will only list the projects and working experience that pertains to the position applied for.
  • Mentored junior electrical professionals on proper procedures.
  • Examined and tested electrical systems from 120/240volt AC single phase to 480 volt AC three phase 4 wire as well as 13.2kv terminations in air break switch gear for signs of tracking do to lack of proper scheduled cleaning. Hot spots with thermal temperature gun, or other faults and make proactive repairs.
  • Followed all company and OSHA established safety practices when using tools and equipment.
  • Seasoned Journeyman Electrician bringing 21 years' experience working on existing building systems as well as new construction.
  • Shalman Electric, Sacket lake, NY Job responsabilities : Daily work reports with billing information, materials used, job progress and estimated completion date. Shop stock material inventory and weekly invoices for materials commonly kept in house. Maintanence contract with Verizion cellular installing AC power and halo grounding for multiple cell towers. UPS systems and stand buy generators installed and maintained at multiple sites as well with written quarterly maintenance and diagnostic reviews. Bell flavors of Middletown, NY. Explosion proof conduit, fittings, seal offs and intrinsically safe devices installed in evaporation units section of facility. Partial process of making butter for microwavable popcorn. Resnick manufacturing industries. Maintenance contract including stand by generator servicing, power modification per changes in manufacturing areas, maintained plant compressed air system with air dryers, security camera installation and security system upgrades as well as biometric palm readers for employee time records. Additionally 4 other maintenance contracts with local resorts. Kutchers, and sports academy. The Nevele. Concord Hotel. The Villa Roma Resort and hotel. Responsibilities included detailed notes on luminaries and bulb type, standard circuit breakers per each establishment, kitchen exhaust fan models, belt sizes, capacitor, HP. Water storage float switch type and levels, sewage treatment pools motor and contactor details. any other emergency call services needed.
  • Parrela Electric, Ball can plant of Newburg, NY. Proactive maintenance of acid bath wash machine for newly pressed aluminum cans do to corrosive nature of treatment process. Job duties included removal of all electrical conduit, trough's, fittings, wiring, ESD buttons, flow, level and temperature devices with accurate schematic for reinstallation and proper process control upon reinstallation. Working closely with fitters and machinist all components changed over to stainless steal or PVC coated conduit and fittings. Proper coordination and detailed motor and process control allowed for functional start up. This was a 24 hr a day manned project, turned over on time and accident free.
  • Perrica Electric minor accounts. Dynergy head business office in Stewart airport business district. Job responsibilities: Project foreman and myself responsible for all aspects of electrical main service and branch circuits. Complete electrical, fire alarm, perimeter security access, security camera system, IT and communication cabling to data racks and patch panel termination. Worked closely with A/V specialist to install multiple complex displays for main conference room and smaller board rooms. Accurate blue print set and understanding how to read all divisions as well as all other trades lead to a successful installation with no conflicting space between trade installations. I was also responsible for accurate material counts onsite and needed for next phases, keeping track of change orders and time required for each. Full set of as builds for second phase of building especially underground utilities.
  • Rerrica Electric major accounts; IBM East Fishkill micro processor chip fabrication and chemical storage facility. Job responsibilities included PLC device installation on tool room floor chemical pipe lines. Thermocouple installation for process temperature control valve reading at end of chemical piping interface with associated utilization equipment. Replacement of clean room negative air pressure switches activated by door contacts in gowning rooms. P&ID used for successful device identification and request to take offline for bench calibration or replacement.
  • Matco Electric; Liberty CSS addition and renovations; Job responsibilities included lead fire alarm installer for elementary school addition and renovations as well as installing duct detectors and beam sensor devices in high school. Correct reading of one line diagrams and corrdination blue prints allowed for F/A conduit instillation prior to all other trade work. Responsible for entire ethernet and VoIP installation, identification, termination and system certification and recording of OTDR signal range for Db loss within acceptable standards limits. Similar testing and certification of single and multi mode fiber optic back bone lines after all break out terminations completed. Temporarily subcontracted by Johnson Controls to install cabling for PLC steam flow meters, temperature transmitters and VFDs associated with new boiler installation and process control panel. Instructed daily work details to crew consisting of two apprentice s and two mechanics.
  • Sparks Electric of Brigetone, NJ Project; Leone glass factory automation upgrade phase 1. Job responsibilities; Forman to team of 4 journeymen mechanics for installation of multiple conveyor systems PLC controlled quality product assessment, pneumatic product failure rejection system to secondary culler conveyor belt system for re-smelting of glass. Manual and automated ESD integration per each work zone location. Personally terminated 70% of VFD motor control systems with proper planning and wire management skills and ladder logic wire schematics. Participated in daily job progression meetings, all forklift operations(only member with fork lift and lull certification), constant inter trades communication and 24 hour electrical staff project meet desired dead line in 55 days, 12 hour shifts, 7 days a week.
  • Continuied experince in all manufacturing areas including regular and pro active maintinence. PLC instrument calibration, replacement and field moduale I/O terminations. Security system, IT transmission systems, Foreman and General Foeman positions. Advanced trouble shooting skills, temporary solution resolution and daily logs upkeep preformed at the following projects in various configurations as required on individual need.
  • Projects where these duties and many others were carried out include; Phizer pharmaceuticals of Orangeburg NY, Rockland County 911 emergency and hazmat center (also fail safe facility for NYC 911 emergency services). Bloomburg Data storage facility, JP Morgan and Chase Data storage facility, Martian data storage facility, IBM Sterling forest location, IBM Poukippsie location, Revere Smelting Refinery of Middletown NY. West Point Military Academy. YO1 Health Spa of Monticello, NY. Montriegn casino and resort of Monticello, NY. Orange Regional Medical center of Middletown, NY. New Sullivan County jail. The Gap Warehouse facility.
  • Assembled and installed physical structures, electrical wiring and electronic components, including maintenance of all equipment from incoming power to component level with 12vD/C to 480vA/C.
  • Built controllers and panels to complete system installations.
  • Traced and diagnosed electrical malfunctions using hand tools and test equipment.
  • Kept work areas clean, neat and free of hazards.
  • Supported clients by interpreting drawings, wiring diagrams, flowcharts and project requirement descriptions to confirm correct electrical component hook-up for optimal results.
  • Reviewed diagrams and relevant codes to complete tasks safely and accurately.
  • Enhanced customer satisfaction ratings, troubleshooting after-hour breakdowns for immediate repair.
  • Proficient Journeyman Electrician adept at mentoring junior electrical workers and training on correct safety procedures, building codes and finishing strategies. Motivational leader able to solve routine and complex problems with resourceful and experienced approach.
Ross Electric | Liberty, NYElectrician06/2002 - 03/2004
  • Identified and addressed hazards, defects and repair requirements through inspection of electrical equipment.
  • Installed wooden utility poles, cross arms, guide wires, porcelain conductor insulators , transformers accordingly for desired secondary voltage needs. Both private customers and public works projects as well as sports field lighting and control systems.
  • Facility maintenance contracts with Sullivan County Community College and Monticello horse racing track. Duties included maintenance and exercising of main switch gear and transformers, general electric trouble shooting, repairs, motor maintenance, branch circuit power installation and lighting fixture upgrades. Installation of LED RF controlled signs and score boards.
  • Scheduled projects and maintenance of automated control systems for Liberty sewage plant and manually operated controls for Tetz rock quarry's and asphalt production plants.
  • Responsible for turning in daily job reports, material used and needed. Filling for and passing rough and final inspections in residential and commercial projects.
  • Assigned company utility vehicle general maintenance, cleanliness and common material stocking and organization.
ITC Electric and Communications | Bayshore, NYElectrician Helper01/2000 - 03/2002
  • Dug trenches and created holes to pull conduit and install supports.
  • Transported required supplies and employees from headquarters to job site using company vehicles.
  • Utilized measuring and testing instruments such as ammeters, ohmmeters, voltmeters and testing lamps accurately, efficiently and safely to complete installations and repairs.
  • Gathered required tools and equipment for each task to increase efficiency.
  • Part time employee while attending college in Long Island NY.
Education and Training
Liberty Central School | Liberty, NYHigh School Diploma05/1999

Liberty High School graduate with 2 year vocational training course completion in electronic repair, component functions and testing.

Completion of 2 regents degrees in music and science/biology.

Joint Admission To Suffolk CCC/ Stony Brook U. | Brentwood, NYSome College (No Degree)

Maintained 3.4 GPA in Liberal Arts with focus on Biology and Psychology with 47.5 credits earned.

Reason for withdrawal proximity to 9/11 terrorist attacks.

IBEW LU 363 JATC | Harriman, NYJourneymen Electrician in Motor Control/IT Sys. Technician01/2010

6 year apprenticeship program, 1st year non vested member. Over ten thousand hours of on the job training from senior electricians. Standard course curriculum with two part Journeymen final exam, written and hands on.

Enrolled in all available specialty courses and certifications offered through union hall during nights and weekends.

2007 Recognized before Union members and Business Manager for exceptional aptitude and craftsmanship in IT communications field. Presented with full set of Klein tools for communication and fiber optic terminations.

Sullivan County Electrical Licensing BoardSullivan County Master Electrician Certification M-44505/2014
Build Your Own Now

DISCLAIMER

Resumes, and other information uploaded or provided by the user, are considered User Content governed by our Terms & Conditions. As such, it is not owned by us, and it is the user who retains ownership over such content.

Resume Overview

Companies Worked For:

  • Kv Electrical services
  • IBEW LU 363
  • Ross Electric
  • ITC Electric and Communications

School Attended

  • Liberty Central School
  • Joint Admission To Suffolk CCC/ Stony Brook U.
  • IBEW LU 363 JATC
  • Sullivan County Electrical Licensing Board

Job Titles Held:

  • Owner/Master Electrician
  • Journeyman Electrician
  • Electrician
  • Electrician Helper

Degrees

  • High School Diploma
    Some College (No Degree)
    Journeymen Electrician in Motor Control/IT Sys. Technician
    Sullivan County Master Electrician Certification M-445

Similar Resumes

View All
Master-Electrician-resume-sample

Master Electrician

Biggs Electric

Austin, Texas