Machine Operator resume example

At vast, I knew how to do everything in the warehouse except cut the plexi glass on the table saw. It was a very small business of about a little over 20 workers maybe. I would cut different types of aluminium extrusions on two different chop saws, I also chamfered the ends of certain extrusions at a 45 degree angle. I cut flocking, which slid into the single pieces of frame giving the glass more support when it slides in the frame. I also built the frames and cut the gasket pieces that went along the back of the frame to prevent leaks. I drilled holes in ones that needed hinges and also put the hinges on, and I also helped pack the frames into boxes. There were lots of other jobs or things to do that I had also learned to do. I literally did it all or had at least done it all except cut the glass. I helped unload the trucks maybe once a week or so because we had to push the extrusions off the truck because they came on rollers and weighed anywhere from 1000-1500lbs sometimes maybe a little more.

I worked on the line and packaged the bread as it came down the line, I also fixed the tape machine if it broke down or got jammed. I worked in palletizing where i stacked the boxes up as they came back and id operate the plastic wrap machine. I also kept the line stocked with fresh boxes as they ran out and helped bind up the cardboard in the cardboard machine in times when it needed to be changed.

Contreras Construction was a family business in which I helped my stepdad frame houses. We had a few workers along with my brother and I. My responsibilities varied from climbing up and nailing certain things, helping them hold up the roof while they nailed it in and hold up siding and lots of other things. I would pass up things that were on ground level that they needed as well as doing runs for my stepdad. I mainly worked on the ground or at certain heights due to my fear of heights. I sometimes cut things with the saws so I could get a better feeling for cutting as well. I was also playing football so due to my strength and other things, I would pick up pieces of siding and flooring and plywood, 2x4 and any other pieces of material and lift it over my head to pass it up to my stepdad, brother, or other workers. Anything that I was asked that I could actually do. I also worked in contracting with a family friend and demolition/remodeling. Ive done everything inside and outside of a house along with "side jobs" such as building doghouses. large office desk for the house and anything my mom and/or stepdad wanted to build.