Over 14 years of experience in various levels in the inspection field of Processing Plant Inspection like static and rotary equipment, Storage tanks and associated piping in on-stream, shutdown inspection, maintenance inspection, project inspection, Vendor inspections and oil & gas plants
QC activities starting from materials receiving inspection until the final product at various stages that includes visual inspection of weldments interpretation of radiographs, PMI inspection, hydro testing, Valve Testing,performance test, blasting and painting includes lining and coating, preparation/review of project Quality control Plans, testing procedures, ITP etc… Familiar with various codes and standards of inspection.
As General Inspection Engineer in P/L Operation Dept:
Responsible for the following scope of works:
• Conduct all inspection scopes in the Operations Department, Pipeline Division of GNPOC
such as follow:
1.Welding Inspections for new or existing welding joints on pipelines, tanks, pressure vessels and other plant equipments .
2.Conduct materials inspection such as thorough visual inspection for any material defects if any, verified heat number as per the mill certificates, thickness gauging, etc.
3.Inspection of Plants' Equipment Facilities such as pressure vessels, heat exchangers, air receivers that also include inspection of cranes, wire/fiber slings, loose lifting tackles etc.
4.Safety Relief Valve Inspection and Testing.
5.Inspection of Cranes & other Lifting Machines, Inspection of Slings & Loose Lifting Tackles.
6.Storage Tanks Painting Scope of Work. Storage Tanks Inspection as per API 653.
7.Piping inspection as per API 570.
8.Pipeline Repair by type B welding sleeves.
9.Participate in any Emergency Repair of the pipeline which may occur due to pipe rupture or leaks.
10.Responsible for integrity assurance of lifting gears being used for plant operations through annual inspection and load testing plan.
11.Responsible for doing Root Cause Analysis (RCA) / Failure Analysis, preparation of welding & repair procedure, Welder qualification tests.
12.Produce and qualify all GNPOC Welding Procedure Specifications.
13.Plan and Conduct Welders Training Program as per GNPOC Qualified WPS.
1-Radiographic Testing (RT) Level III, ASNT.
2-API 570 Piping Inspector certificate No.53565.
3-Senior Welding Inspector CSWIP 3.2 by TWI, Certificate No.82075.
4-Plant Inspector Level I by TWI Malaysia, Certificate No.25890.
5-Welding Inspector CSWIP 3.1 by TWI Malaysia, Certificate No.23861.
6-Radiographic Inspector level II ASNT, by Middle East Industrial Training Centre (METIC) in Abu Dhabi UAE.
7-Ultrasonic Inspector Level II from Sudan Atomic Energy Commission in collaboration with (MINT) Malaysia
Companies Worked For:
Job Titles Held:
© 2019, Bold Limited. All rights reserved.