cnc operator small machine operator resume example with 6+ years of experience

Jessica Claire
, , 609 Johnson Ave., 49204, Tulsa, OK 100 Montgomery St. 10th Floor
Home: (555) 432-1000 - Cell: - - -

Hardworking General Laborer with dedicated work ethic in any industry. Knowledgeable with operations of heavy and light equipment to accomplish tasks. Lifts and carries objects over 50 pounds, reliable and works well in varying conditions.

  • Quality Inspection
  • Organizing Supplies
  • Quality Controls
  • Machine Alignment
  • Quality Assurance
  • Hand and Power Tools
  • Written and Verbal Communication
  • Raw Materials Handling
  • Heavy Machinery Operation
  • Safety Compliance
  • Facility Cleaning
  • Safety Processes and Procedures
07/2014 to 11/2015
CNC Operator, • Small Machine Operator Department Of Defense Fort Dix, NJ,
  • Set-up and operated lathes, mills and grinders to cut raw materials.
  • Kept parts within close tolerances of design standards to maintain optimal quality.
  • Changed out aging tools, fixtures and offsets.
  • Loaded and unloaded machines to prevent expensive equipment issues.
  • Observed company's strict safety rules during each shift to avoid job-related injuries.
  • Achieved safety, quality and performance standards to meet production schedules.
  • Prepared machine for production processes by equipping with required tools and parts.
  • Monitored and observed production line to watch for pile-ups and jams.
  • Manipulated controls to set, activate and adjust mechanisms on machinery.
12/2022 to 06/2023
Safety Technician Berry Global City, STATE,
  • Followed safety practices to safeguard against injury and damage to property.
  • Adhered to applicable regulations, policies and procedures for health, safety and environmental compliance.
  • Inspected job sites for hazardous conditions, excessive noise and PPE use.
  • Identified and raised awareness of prevalent unsafe behaviors, executing injury prevention efforts to instill facility personnel with core value of workplace safety.
  • Analyzed job and worksites and reported on hazards, recommendations and successful corrections.
10/2018 to 08/2019
Painter's Assistant Prestige Paint Pros City, STATE,
  • Painted walls and other large areas using brushes, rollers and spray guns.
  • Communicated with crew leader to receive new job assignments.
  • Prepared job spaces by unloading trucks, placing ladders and setting up protective equipment.
  • Prepared surfaces by stripping existing coatings, filling holes and sanding.
  • Set up painting job spaces by unloading trucks, placing ladders and laying out protective tarp draping sheets.
  • Created protective coating by applying clear coat.
  • Removed existing wallpaper by applying solution, scraping and peeling paper off walls.
  • Organized supplies and tracked stock levels to maintain inventory records and request reorders.
  • Readied drywall by applying skim coat, sanding and adding desired texture.
  • Organized and cleaned work area and tools.
  • Protected surfaces with masking tape and plastic sheeting to prevent damage.
  • Covered floors before prepping, priming and painting walls and ceilings to protect them from chemicals and paint.
  • Completed high-volume weekly painting jobs with consistently positive customer feedback.
08/2006 to 06/2010
Stonemason Harden Stone And Masonry City, STATE,
  • Laid bricks or blocks in the proper configurations according to plans.
  • Calculated mixture ratios, angles and square footage to determine materials needed and plan layouts.
  • Repaired or altered structural and superficial damage to various masonry work and surfaces.
  • Cleaned and prepared work surfaces with appropriate tools and solvents.
  • Laid building materials such as ceramic tile, bricks, concrete blocks and glass blocks using mortar or other substances to join.
  • Formed edges and molded joints with edging tools and jointers.
  • Cut and split bricks or other materials to fit written and illustrated dimensions.
  • Restored mortar joints by removing mortar to exact depth and replacing with fresh mortar.
  • Readied work areas by clearing and smoothing surfaces and adjoining structures.
  • Smoothed final surfaces by removing excess mortar and finishing joints.
  • Applied stains, sealer and curing agents to masonry.
  • Moved bricks, tools and supplies with equipment such as forklifts and hand trucks.
  • Cut, trimmed and shaped stone to achieve tight fits and attractive designs for each customer.
  • Mixed mortar and grout and used to adhere building materials and create structures.
  • Prepared for each job by accurately laying out wall patterns and foundation plans.
  • Filled joints between stones with trowels and used points to create professional lines.
  • Removed excess materials and smoothed surfaces to achieve desired finishes.
  • Drilled holes in stone and anchored brackets in holes to secure.
  • Guided large stones onto foundation locations using truck cranes, hoists and skids.
  • Worked with hand tools to stake lines for wall and foundation patterns.
  • Removed broken masonry and constructed replacement sections for walls and floors.
  • Built sturdy and durable chimneys based on individual customer requirements.
Education and Training
Expected in 01/2005
Basic Electricity/Cert Residential Wiring/Cert:
Ivy Tech Community College - ,
Expected in 01/2003
Career - ,

By clicking Customize This Resume, you agree to our Terms of Use and Privacy Policy

Your data is safe with us

Any information uploaded, such as a resume, or input by the user is owned solely by the user, not LiveCareer. For further information, please visit our Terms of Use.

Resume Overview

School Attended

  • Ivy Tech Community College
  • Career

Job Titles Held:

  • CNC Operator, • Small Machine Operator
  • Safety Technician
  • Painter's Assistant
  • Stonemason


  • Basic Electricity/Cert Residential Wiring/Cert
  • GED

By clicking Customize This Resume, you agree to our Terms of Use and Privacy Policy

*As seen in:As seen in: