Technical Field Service Rep. resume example with 2+ years of experience
JessicaClaire
, , 609 Johnson Ave., 49204, Tulsa, OK100 Montgomery St. 10th Floor
Home: (555) 432-1000
Cell:
resumesample@example.com
Professional Summary
Licensed Apprentice Electrician 2+ Years experience in Industrial/Large Scale Commerical with multiple multi-story buildings. Termination’s, repair and maintenance of medium voltage utilities , 12,741 volts/ PLC systems. Also experienced in “High Pot” and “Tan Delta” medium volt testing. 3M Certified in All medium volt terminations; Butt Splice, T Body, Dead Break, Load Break and Bolt on connections. Experience in conduit bending skills from 1/2” conduit threw 4” as well as cutting and threading up to 4” Rigid conduit. Can adequately interpret Blue Prints, One Line Diagrams, panel schedules and submittals as well as a small amount of trouble shooting. Experience in running up to 5 men crews. Can coordinate with multiple trades to ensure seamless transitions on site in real time to keep conflicts at minimum. Generate material list and get along with fellow employees.
Skills
Read & Interpret Blueprints
Terminations
Troubleshooting / Problem Resolution
Blueprint reading
Work History
Technical Field Service Rep., 12/2019 to 12/2020 Heritage Phce – Tewksbury, MA,
Installed, maintained, repaired and tested equipment for electricity generation and utilization.
Worked from ladders, scaffolds and lifts to install, maintain or repair electrical wiring equipment and lighting fixtures in ceilings, on roofs and on towers.
Coordinated with other trades and general contractors to facilitate layout of recessed fixtures and architectural lighting.
Inspected electrical systems, equipment and components to identify hazards, defects and repair requirements.
Enhanced quality control by inspecting condition of equipment and tools.
Demonstrated expertise in use of cable reels, stripping tools, voltage detectors, crimping tools and wire and cable cutters to complete fast-paced work.
Worked with various types of cableways, conduits and other electrical raceways.
Read and interpreted electrical, mechanical and architectural drawings and electrical code specifications for wiring layouts.
Planned layout and installation of electrical wiring, equipment and fixtures based on specifications and applicable code.
Launched troubleshooting and tests on equipment post-installation to confirm compatibility and safety of electrical systems.
Properly stored and maintained power tools and equipment for each job.
Identified areas of potential state safety code violations and implemented revisions.
Studied blueprints to understand specifications and adjusted machines to produce quality parts.
Maintained clean, neat and well-organized work area and disposed of all trash in proper receptacles to promote productivity, safety and efficiency.
Prioritized tasks to meet project deadlines and remained composed in busy work environments to avoid wasted time and effort.
Oversaw task prioritization and remained calm in fast-paced situations to streamline accomplishment of key milestones.
Reviewed blueprints to determine proper setup procedures for producing specified parts.
Moved controls to properly position tools and workpieces, set specific feeds and determine cut depths for optimal operations.
Installed appropriate parts to bring electrical power to audio and visual equipment, signaling devices and heating or cooling systems.
Read and interpreted drawings to provide wiring layouts for new installations
Executed electrical wiring plans for Panels, Plc and other electrical systems.
Spliced, joined and connected wire to fixtures and other electrical components.
Apprentice Electrician, 05/2018 to 07/2019 Heritage Phce – Auburn, NH,
Served as electrical apprentice on high-rise commercial and residential buildings, including roughing for new construction, rehabilitation and maintenance projects.
Worked under supervision of Journeyman to learn trade and develop electrical knowledge.
Assisted with electrical installations, including lighting and smoke detectors.
Maintained cleanliness and organization of work areas.
Configured equipment and optimized performance.
Installed new electrical components, fixtures and motors.
Checked measurements and completed accurate cuts to prevent materials waste and maintain cost controls.
Inspected and tested electrical systems to identify connection issues and other faults affecting system performance.
Repaired existing systems and replaced malfunctioning parts.
Tested wiring and other system parts for electrical flow and function.
Used hand and power tools and diagnostic equipment to complete various aspects of jobs.
Followed direction of senior electrical professionals to complete safe, efficient tasks.
Moved equipment, supplies and tools to work locations to assist WORKERS in completing skilled work.
Boosted job efficiency and customer satisfaction by maintaining organized and clean job sites.
Configured controllers and set up panels for NEW installations.
Gathered parts supplies and tools in preparation for each workday or new job.
Accurately pulled EMT and PVC conduit wire while maintaining safety standards.
Reviewed electrical schematics and plans and followed according to specifications.
Checked and performed electrical wiring through conduits and holes in walls and floors.
Installed electrical components by splicing, joining and connecting wire to fixtures.
Gained experience and recognition for ability to analyze and follow manuals, schematic diagrams, blueprints and other specifications
Placed EMT and PVC conduits and pulled wire through conduits.
Worked under supervision of Journeyman Electrician to learn trade and develop electrical knowledge.
Apprentice Electrician, 01/2018 to 05/2018 C&C Electric – City, STATE,
Worked under supervision of Journeymen to learn trade and develop electrical knowledge.
Configured controllers and set up panels for new installations.
Moved equipment, supplies and tools to work locations to assist crew in completing skilled work.
Installed new electrical components, fixtures and motors.
Served as electrical apprentice on high-rise commercial and residential buildings, including roughing for new construction, rehabilitation and maintenance projects.
Used hand and power tools and diagnostic equipment to complete various aspects of jobs.
Helped complete system installations, digging trenches and breaking up concrete.
Configured equipment and optimized performance.
Tested wiring and other system parts for electrical flow and function.
Fabricated custom and replacement parts according to specifications, using hand tools such as Grinder and Hacksaw.
Education
GED : , Expected in Westwood High School - Austin, TX GPA:
Certifications
OSHA 30
MSHa
3m Certified for Terminations/Splices up to 15,000
Any information uploaded, such as a resume, or input by the user is owned solely by the user, not LiveCareer. For further information, please visit our Terms of Use.