Livecareer-Resume

Senior Process Engineer Resume Example

Love this resume?

By clicking Build Your Own Now, you agree to our Terms of Use and Privacy Policy

JC
Jessica Claire
Montgomery Street, San Francisco, CA 94105 (555) 432-1000, resumesample@example.com
Profile
PROCESS ENGINEER
Nine years of experience as a Process engineer for EPC projects in the Oil & Gas upstream-midstream, NGL, Condensate Stabilized, Cryogenic Refrigeration and Gas Plant Projects.  
Project deliverables included the following: Developing process flow diagrams (PFDs), process simulation, defining heat and material balances, preparing process specifications for equipment and instrumentation, and developing piping and instrumentation diagrams (P&IDs). Ensured project deliverables conformance to recognized codes, standards, and client requirements. 
Participated projects included:Experience with process engineering for oil and gas production facilities projects. Experience includes conceptual, pre-FEED, FEED and detail engineering design.
Areas of Expertise

  • Aspen HYSYS
  • HYSYS Dynamic 
  • PSV Sizing 
  • Aspen Flarenet  
  • HTRI /B-JAC
  • Aspen Exchanger Design
  • PHA/HAZOP Review 
  • Hydraulics design


 

  • Oil and Gas
  • NGL
  • Gas Plants
  • Cryogenic Refrigeration
  • Condensate Stabilized
Certification

Professional Engineer (P.E.) Texas Board, License No. 119986

Professional Experience
10/2014 to 06/2015 Senior Process Engineer Aecom | Colorado Springs, CO,
S&B Modular 225 MM SCFD Gas Plant Design, Houston, Texas
As part of the design effort, created the heat and material balance based on the clients feed stock and rate with the simulations created for the standardized S&B gas plant. Optimized the conditions within the cryogenic plant in order to maximize ethane recovery in ethane recovery mode and minimize propane loss during ethane rejection mode. The project included feed treatment, fractionation, glycol dehydration, compression, and associated pumps and heat transfer equipment. Participated in PHA review of the P&IDs.
Ethane Export Terminal, Texas FEL project for the design of a multi-train, staged refrigeration unit, using Black & Veatch technology, and associated systems to receive and process ethane and to load the product onto ships.  Scope also included dehydration, demethanization, cryogenic storage, ship loading, pipelines & metering, and utilities.
10/2013 to 10/2015 Process Engineer Ametek, Inc. | Milford, NH,
COP EVLRP CO2 Reinjection Project
Senior engineer for dehydration and compression expansion project. Collaborated with client to performed  feasibility studies to determine bottlenecks. Developed HYSYS model for dehydration and compression units. Evaluated existing relief system capacity using Aspen Flare System Analyzer. Updated P&IDs and prepared relief valve calculation packages and performed HP/LP interface study.
09/2011 to 09/2013 Process Engineer Ametek, Inc. | Mount Prospect, IL,
BP Mad Dog Phase 2, Deepwater Gulf of Mexico Oil Production Platform :                                 
FPSO topsides design involving production plant facilities to process 130 Mbpd oil (API 14), 37 MMscfd gas. PFD/P&ID development using various philosophies like Isolation, Tie-in, process simulation, relief system evaluation and equipment sizing/specifications for oil & gas topside industry. Developed HYSYS dynamic model to analyze the process.
  • Performed process simulation using Aspen HYSYS; process flow diagram; Heat and material balance; line sizing and hydraulic calculations; process equipment data sheet; process input to instrument data sheet/P&ID.
  • Size Relief Valve for the controlling overpressure scenario, and perform Inlet and Outlet line pressure drop calculations.
  • Modeling of Flare system and sizing of Flare header using Aspen Flarenet per API 520/521.
  • Dynamic Relief Load Estimation of the topside unit (Big Dog Spar) under different global failure scenarios (i.e. General Air failure, Partial Power failure, etc.) for the adequacy check of flare header using Aspen Dynamics.
  • Performed Dynamic Depressurization calculations using HYSYS for Flare, Blowdown, HP/LP interface and Low Temperature studies, also performed settle out pressure calculation for compressor system.
  • Analyzed high risk relief systems with HYSYS Dynamic to evaluate ice/hydrate formation.
  • Participated in technical meetings (design and P&ID reviews, MOC, HAZOP, LOPA, Vendor/Client meeting, etc.)
  • Perform Hydraulics study including Pumps and Control valves for single circuit or for entire unit.  
ExxonMobil Kizomba Satellites (FEED, Detailed Design): Developed process simulation using engineering software, generate piping & instrument diagram (P&ID) and process flow diagram (PFD), review design basis & philosophy documents, Performed squad checks for flare system calculations.
05/2006 to 10/2011 Process Engineer Berry Global Group Inc. | Sioux Falls, SD,

Performed thermal design, rating and simulation of shell & tube heat exchanger and  tubular reboiler using HTRI, B-JAC, TEMA per API 660, and ASME Code. Design, selection and operation of heat transfer equipment.

  • Performed engineering design evaluations, reviewed technical specifications and performed calculations for heat exchanger and vessel design.
  • Developed sizing information for process equipment including line and nozzle sizing, performed cost estimation and provided a quotation with technical information in the form of equipment data sheets for competitive bid.
  • Reviewed client data and drawings for compliance with project specifications, assisted designers for process data & drawing review, coordinated with design team to finalize equipment sizing and layout.
  • Debottlenecking project and trouble shoot in design development and operational issues. Interacted with project team members and customers to ensure compliance with the company’s quality and safety procedures.
01/2002 to 01/2003 Process Engineer Berry Global Group Inc. | Middletown, ,
Process Engineer – Gas Plant
Assisted on up-gradation of P&ID and PFDs and performed heat and material balance. Prepared preliminary equipment specification data sheets for distillation columns, pressure vessels, pumps, compressors, heat exchangers. Performed line sizing and developed pipe specifications. Troubleshot various unit operations like distillation, absorption, cryogenic separation to achieve a normal operating condition for Ammonia manufacturing (Hydrogen and Nitrogen unit).
Education
Expected in 2006 Master in | Chemical Engineering Stevens Institute of Technology, Hoboken, NJ GPA:
Expected in 2004 | Post Diploma in Industrial Safety Mahatma Gandhi Labor Institute, Ahmedabad, GPA:
Expected in 2001 Bachelor in | Chemical Engineering Sarvajanik college of Engineering and Technology, Surat, Gujarat GPA:

By clicking Build Your Own Now, you agree to our Terms of Use and Privacy Policy

Disclaimer
Resumes, and other information uploaded or provided by the user, are considered User Content governed by our Terms & Conditions. As such, it is not owned by us, and it is the user who retains ownership over such content.

How this resume score could be improved?

Many factors go into creating a strong resume. Here are a few tweaks that could improve the score of this resume:

75Average

Resume Strength

  • Length
  • Personalization
  • Target Job

Resume Overview

School Attended
  • Stevens Institute of Technology
  • Mahatma Gandhi Labor Institute
  • Sarvajanik college of Engineering and Technology
Job Titles Held:
  • Senior Process Engineer
  • Process Engineer
  • Process Engineer
  • Process Engineer
  • Process Engineer
Degrees
  • Master in
  • Bachelor in