Jessica Claire
  • , , 100 Montgomery St. 10th Floor
  • Home: (555) 432-1000
  • Cell:
Professional Summary

Currently working as an Emissions Technician surveying various types of equipment using Optical Gas Imaging (OGI) equipment throughout the Delaware Basin East to identify, address, and resolve fugitive emissions related issues. Worked as Multi-Skilled Operator for ConocoPhillips for 1 year in the DBE Claire asset covering multiple battery lease and gaining knowledge in gas lift operations as well as a contract designee MSO at COP through Airswift for 3 years in CO2 and water flood production field at Buckeye, NM overseeing approximately 70 well lease and related gathering system and facilities. Past experience as a Lead Operator coordinating a crew of operators to meet targets and expectations set forth by management in a safe and professional manner. Safety oriented to company and industry standards and Navajo Refinery's (Lovington) representative for Process Safety Management concerns through election to committee seeking proactive ways to implement PSM to the workforce. Background in machining down-hole drilling tools and deliveries to rig locations.

  • Certified Infrared Thermographer on Optical Gas Imaging 1 through the Infrared Training Center.
  • 15 years total oilfield experience
  • Awarded HollyFrontier's Presidents Award for efforts toward improving Navajo Refinery's PSM program.
  • Proficient in LO/TO of equipment
  • Trained in Process Safety Management through Artesia Refinery's PSM Boot Camp.
  • HAZMAT certified at Incident Command level through TEEX
  • Certified 1081 Exterior Firefighter through TEEX
  • ROCO Rescue Ropes I & II at Baton Rouge, Louisiana
  • 3 years on Process Safety Management committee
  • 6 years experience with Honeywell DCS system as Board/Lead Operator
  • Attended AFPM safety conference twice San Antonio, TX
  • Understanding of OSHA safety regulations
  • 4 years experience in Production as Multi-Skilled Operator
  • Water treatment for cooling tower and boiler sampling and operation
  • Daily issuing of Safe Work, Hot Work, and Confined Space Entry permits.
  • Proficient in use of fresh air on SAR/SCBA
Work History
Emissions Technician, 08/2022 to Current
Quadgraphics, , Loving, NM DBE
  • Executing emissions corrective maintenance program including defect elimination process.
  • Collaborating with key support groups and customers to ensure goal alignment with Asset & Operating Integrity (A&OI) program & Health Safety & Environmental (HSE) requirements.
  • Driving continuous improvement by developing new philosophies and maintenance tactics.
  • Managing job assignments for contractors.
  • Maintaining a close link on the planning and scheduling function driving strict discipline in observation of the various work schedules.
  • Working with Operations to ensure accurate prioritization of work. Managing of change/risk assessment responsibilities.
  • Leading the FLIR maintenance and reliability efforts within the asset to improve equipment reliability while focusing on the management of field maintenance activities.
  • Leading and participating in incident investigations when needed.
  • Driving contractor safety through HSE management system & contractor management, safety orientations and management reviews with vendors.
  • Establishing procedure and guidelines and ensures that all work activities are performed according to the established procedures, guidelines, and schedules.
  • Documenting of emissions control.
  • Conducting corrective and preventative maintenance for vent valves, thief hatches, etc.
  • Operating fugitive emission detecting equipment such as the GF320 and GFX320 FLIR cameras
  • Conducting regulatory inspections of facilities, wellsite & plants record data into a software program.
  • Generating quality check reports of FLIR data to ensure the information meets Regulatory tracking requirements and reconcile as needed.
  • Compiling data to provide performance monitoring reports as needed.
  • Submitting work request into SAP.
  • Managing contract crews during repairs of equipment.
  • Operating a company-provided vehicle to perform job duties in a safe manner.
  • Collaborating with other groups such as, but not limited to, Corporate Regulatory group, Planning & Scheduling, Supply Chain, Materials Management, Projects, and Operations to foster an environment of continuous improvement.
  • Identifying and preserve sensitive and confidential information.
  • Reviewing vendor invoices and confirm correct charges for both rate and any performance metric corrections.
Multi-Skilled Operator, 10/2018 to 08/2022
Waste Connections, ,
  • Monitor all wells and facilities to ensure they are operating within permitted limits.
  • Perfom MIT's as scheduled/requested and complete annual braden head testing.
  • Monitor surface casing pressure of injection wells and report any issues to Production Foreman.
  • Complete well tests quarterly or once per month if possible.
  • Ensure well and battery signs are in place and required information is visible including RRC number, section-township-range, emergency contacts, etc.
  • Complete a Well Change of Status form when a well is drilled, re-activated, re-completed, T/A'd, P/A'd, or converted.
  • Attend and participate in safety meetings, training, BBS, and Focused Audit programs.
  • Ensure a JSA/GO CARD discussion is conducted before each task or following job scope changes.
  • Utilize HSE Procedures when performing job tasks (LOTO & Try, Hot Work, Confined Space, etc.)
  • Check XSPOC and Scada/Cygnet each morning to determine priorities and operate by exception.
  • During daily rounds, record production and well tests for entry into Avocet and the area production report.
  • Record all downtime into report for entry and tracking in the LPRS System.
  • Perform operational checks and troubleshoot and conditions or deviations outside of normal operating ranges.
  • Analyze and track well performance and initiate optimization work when opportunity exist.
  • Ensure chemical and well treatments are executed as scheduled and adjust based upon results.
  • Participate in Start-ups, PSSR's, and Well Handovers.
  • Perform general housekeeping and keep locations free of trash, weeds, and excessive equipment.
Lead Operator, 12/2009 to 10/2018
Blair Tool And Machine, ,

Utility Operator

  • Collected and ran daily water samples from cooling tower and boilers to ensure proper operation
  • Ensured proper operation of API waste water unit
  • Ensured proper operation of utility air and water system including water wells and holding tanks
  • Gauging of all tanks in tank farm nightly, including hand line and water cutting tanks monthly and as needed
  • Ensured proper operation and performed preventative maintenance on Reverse Osmosis Unit
  • Daily check of chemical rates throughout plant, including proper pump operation and downloading chemicals as necessary
  • Report any issues or changes to crew chief

Vacuum & Crude Unit Operator

  • Monitor all outside equipment in respective units including centrifugal pumps and local temperature, level, & flow indicators
  • Ensure proper specs on outgoing products as well as routine sampling to be sent to lab
  • Make necessary pump and compressor changes for mechanics and for preventative maintenance such as suction screen cleaning
  • De-inventory piping and equipment for maintenance, ensuring proper LO/TO procedure and company policies followed
  • Communication with Board Operator to ensure daily operation of refinery
  • Perform proper line up changes and valve closures as needed, including tank line ups and switching of rundown products
  • Communicate any outside safety and environmental issues with Board Operator and Supervisors and properly document any events.
  • Enter work orders into system as needed for maintenance work needed

Board/Lead Operator

  • Monitor DCS system (Honeywell) for proper refinery operation and communicate with outside operators of any changes
  • Monitor Tank Master radar system for proper tank levels and product temperatures
  • Communicate with management on any changes needed to accomplish daily and weekly goals
  • Make calls to outside agencies, pipeline companies, and gas companies to resolve issues or notify of changes
  • Ability to safely raise and lower charge rates as needed, as well as emergency shutdown refinery if conditions deem it necessary
  • Log daily data and work accomplished on proper paperwork and spreadsheets
  • Fill out safety and environmental incident forms as necessary and send to company supervisors
  • Make call outs as needed for emergency maintenance and plant upsets
  • Coordinate crew of operators to accomplish goals set by management and complete maintenance work scope daily
Machinist & Tool Delivery, 05/2006 to 12/2009
Company Name, ,

Tool Hand

  • Cleaned & rebuilt used drilling tools to return back to service
  • Loading/Unloading gooseneck trailers to and from deliveries
  • Use of chain hoists and forklift for transport of tools
  • General shop clean up

Tool Delivery

  • Ensured all loads of proper tie down
  • Maintained truck and trailer for each delivery
  • Delivered tools to rig locations and worked with rig hands to unload in specific location
  • Use of wench line and snatch blocks to unload tools on location
  • Worked with company man on site to sign off on invoices


  • Used metal lathe to cut new down-hole tool blanks
  • Threaded male and female ends of down-hole tools, drill collars, and drill pipe
  • Use of large hydraulic presses to straighten bent drill pipe and collars
  • Built and assembled Kelly roller assemblies for rig floor
  • Maintained machine for proper operation

High School Diploma: , Expected in 2006
Hobbs High School - Hobbs, NM
Graduated top 10% of class

By clicking Customize This Resume, you agree to our Terms of Use and Privacy Policy


Resumes, and other information uploaded or provided by the user, are considered User Content governed by our Terms & Conditions. As such, it is not owned by us, and it is the user who retains ownership over such content.

How this resume score
could be improved?

Many factors go into creating a strong resume. Here are a few tweaks that could improve the score of this resume:


resume Strength

  • Formatting
  • Length
  • Personalization
  • Target Job

Resume Overview

School Attended

  • Hobbs High School

Job Titles Held:

  • Emissions Technician
  • Multi-Skilled Operator
  • Lead Operator
  • Machinist & Tool Delivery


  • High School Diploma

By clicking Customize This Resume, you agree to our Terms of Use and Privacy Policy

*As seen in: