Experienced Maintenance Millwright proficient in performing well under pressure and tight deadlines. Adept at identifying the causes of mechanical problems and repairing machinery or replacing defective parts as needed. Friendly and hardworking with 72 hours of availability weekly.
Skills
Mechanical tools
Safety compliance
Machinery transporting
Machinery installation
Blueprint reading
Productivity and safety improvement
Pneumatic controls
Repair work
Diagnostic techniques
Parts installation
Equipment set up
Tool repair and maintenance
Troubleshooting
Heavy lifting
Malfunction diagnosis
Equipment rebuilding
Equipment categorization
Equipment Repair
Soldering
Tools cleaning
Complex technical plan reading
Work History
Millwright Journeyman, 06/2019 to 07/2021 Vollrath – Los Angeles, CA,
Replaced defective parts of machines and adjusted clearances and alignment of moving parts.
Inspected and examined all machinery and equipment to detect malfunctions or irregularities.
Performed preventive maintenance on equipment and machinery on regular basis to reduce downtime by Number%.
Operated machine tools to fabricate parts during overhaul, maintenance or setup of machineries.
Positioned steel beams to support bedplates of machines and equipment weighing over Number pounds, using blueprints and schematic drawings.
Adhered to all workplace safety policies, regulations, and compliances.
Safely used blow torches, hammers and forklifts, resulting in Number days without accident.
Inserted shims, adjusted tension on nuts and bolts, and positioned parts, using hand tools and measuring instruments with Number% accuracy over Timeframe.
Installed stationary industrial machinery and mechanical equipment according to layout plans.
Read blueprints to safely and efficiently assemble equipment worth up to $Amount.
Laid out mounting holes, using measuring instruments, and drilled holes with power drill.
Used Tool to quickly troubleshoot machinery problems and suggest accurate repairs.
Kept detailed and accurate maintenance reports and documentation of progress.
Disassembled machinery parts and categorized properly before moving to storage.
Signaled crane operator to lower basic assembly units to bedplate and aligned unit to centerline.
Carried out day-day-day duties accurately and efficiently.
Developed and implemented performance improvement strategies and plans to promote continuous improvement.
Worked to maintain outstanding attendance record, consistently arriving to work ready to start immediately.
Maintenance Technician, 05/2018 to 07/2019 Nexion Health – Forney, TX,
Worked frequently with mechanical and plumbing systems to complete knowledgeable inspections and skilled repairs.
Reviewed technical documentation to complete equipment maintenance and repair.
Completed daily, weekly and monthly checklists on building equipment to maintain records of scheduled maintenance procedures.
Troubleshot equipment breakdowns and performed preventive maintenance.
Completed partial or full dismantling of equipment to quickly repair or replace defective components and restore functionality.
Quickly responded to internal service calls regarding malfunctioning equipment and completed repairs.
Determined new technique to streamline maintenance processes to increase workflow.
Maintained restroom functionality by repairing leaking faucets, clogged toilets and other equipment.
Performed electrical and mechanical repairs of production equipment to minimize downtime.
Removed outdoor debris and yard clippings into receptacles to properly maintain grounds.
Finalized work on building systems by completing basic carpentry and other finish work.
Trained junior maintenance professionals on correct repair and cleaning procedures.
Worked with building managers to assess ongoing needs and plan preventive maintenance and cleaning schedules.
Calibrated temperature and equipment settings to optimize performance.
Operated garbage compactor and separated trash for sanitation pickup.
Inspected fire extinguisher equipment on state-mandated schedule.
Assessed operating conditions and adjusted settings to maximize performance and equipment longevity.
Partnered with facility management to successfully complete projects within anticipated deadlines.
Reviewed blueprints and specifications to identify most effective ways to approach projects.
Studied system requirements to order components and parts and perform acceptance tests.
Installed new locks, door handles and door closers.
Examined alarm systems and monitors to meet fire marshal standards and safeguard personnel.
Used problem-solving skills to alleviate issues efficiently with minimal supervision.
Removed dirt and lubricated machinery shafts, bearings and gears as part of regular maintenance.
Followed work orders and specifications for machine and equipment replacement, repair or maintenance.
Millwright, 09/2014 to 05/2018 Cmc – Spartanburg, SC,
Replaced defective parts of machines and adjusted clearances and alignment of moving parts.
Inspected and examined all machinery and equipment to detect malfunctions or irregularities.
Disassembled machinery parts and categorized properly before moving to storage.
Installed stationary industrial machinery and mechanical equipment according to layout plans.
Read blueprints to safely and efficiently assemble equipment worth up to $Amount.
Operated machine tools to fabricate parts during overhaul, maintenance or setup of machineries.
Inserted shims, adjusted tension on nuts and bolts, and positioned parts, using hand tools and measuring instruments with Number% accuracy over Timeframe.
Safely used blow torches, hammers and forklifts, resulting in Number days without accident.
Laid out mounting holes, using measuring instruments, and drilled holes with power drill.
Kept detailed and accurate maintenance reports and documentation of progress.
Performed preventive maintenance on equipment and machinery on regular basis to reduce downtime by Number%.
Adhered to all workplace safety policies, regulations, and compliances.
Used Tool to quickly troubleshoot machinery problems and suggest accurate repairs.
Positioned steel beams to support bedplates of machines and equipment weighing over Number pounds, using blueprints and schematic drawings.
Signaled crane operator to lower basic assembly units to bedplate and aligned unit to centerline.
Demonstrated respect, friendliness and willingness to help wherever needed.
Worked closely with job title to maintain optimum levels of communication to effectively and efficiently complete projects.
Fitter, 02/2013 to 05/2014 Schuff International – San Jose, CA,
Fabricated pipe spools for butt weld, socket weld and threaded systems utilizing proper fit up techniques such as root openings on butt weld fittings and set back on socket weld fittings.
Fabricated and installed various types of supports for piping systems and implemented proper hanger spacing.
Fabricated and installed screw pipe, socket weld pipe and stainless steel tubing.
Fabricated, assembled, installed and maintained piping systems.
Performed pneumatic and hydrostatic testing of systems and modified, repaired or expanded upon existing systems based on thorough understand of working mechanics.
Identified types of pipe fittings by symbols.
Utilized welding equipment and Type tools to safely complete predetermined operations .
Supervised Number apprentices and offered specific recommendations to improve work quality.
Interpreted pipe schematics, isometrics and installation drawings to implement understanding of symbols, reference lines and work points into actual installation projects.
Laid out, positioned, aligned and secured parts for welding and bolt-up.
Installed piping for plumbing systems for domestic and HVAC lines.
Coordinated movement of materials and equipment to job sites.
Recorded center to center measurements of area requiring field run systems and fabricated system based on measurements taken, applying specialized fit up techniques as appropriate.
Followed fitting procedures and principles used in fabrication of offshore jackets, decks, heliports and production facilities.
Translated general notes in reference texts and drawings or schematics into concrete applications of technical principles resulting in exceptional efficiency or durability of systems installed.
Measured, marked, cut, bored, fitted and installed various piping or structural components in accordance with blueprints and job specifications using hand and power tools.
Threaded pipes using piping machines.
Applied knowledge of both standard and metric measurements and performed math associated with pipe installation, adapting items manufactured within different systems of measurement as needed.
Corresponded with supervisor to identify and carry out projects, implementing repairs, expansions and new installations according to customer requirements.
Education
High School: , Expected in 05/1993 Hughes Springs High School - Hughes Springs, TX GPA:
Certifications
Lvl 4 Hazwoper OSHA 1910-120 Training - Date: 6-3-19
Resumes, and other information uploaded or provided by the user, are considered User Content governed by our Terms & Conditions. As such, it is not owned by us, and it is the user who retains ownership over such content.
How this resume score could be improved?
Many factors go into creating a strong resume. Here are a few tweaks that could improve the score of this resume:
