LiveCareer-Resume

lead builder supervisor valve technician resume example with 9+ years of experience

JC J S S JS J S S JS J S S JS J S S JS J S S JS J S S JS
Jessica Claire
, , 100 Montgomery St. 10th Floor (555) 432-1000, resumesample@example.com
Professional Summary

My names Jessica ClaireJr. I graduated from W.B Ray High school in 2011 top 10% of my class (530 students). I quickly transitioned from working at Coca-Cola to the oil and gas industry at the age of 18 because I had found out I was expecting a baby on the way and knew I needed to make a better life for the little family I was starting. I went from building scaffolds to sandblasting/painting to being a insulator helper to insulator level 2. Then after the turnaround was done at LyondellBassell I made my way up to West Texas where I gained all my knowledge and experience working on Valves (Hydraulic/Manual). Fast forward 9 years later I’m just a father of 3 beautiful blessings ( 2 girls, 1 boy) trying to get my foot in the door somewhere I can retire and work my way up and make my name known and let my hard work at dedication to the company speak for itself.

Skills

Loading and unloading equipment off/on 18 wheeler

  • Valve pretesting
  • Quality assurance
  • Disassemble/Assemble Hydraulic and Manual gate valves
  • Communications
  • Forklift/Hoist Operations
  • Equipment Maintenance/Daily check list
  • OSHA-trained
  • Shipping and receiving
  • Manlift/SkyTrak experience
  • Confined space/Fire watch/Hole watch
  • First Aid/CPR
  • Scaffold safety knowledge/experience
  • Fire watch/Hole Watch/Flagger/Spotter
  • Know how to properly fill out a JSA (Job Safety Analysts)
  • Safety management/Observations
  • Business operations
  • Team leader/Supervisor
  • Problem resolution/Troubleshooting
  • Overhead Crane Operator (15 ton, 10 ton, 5 ton, 2.5 ton)
  • Lock Out Tag Out experience (LOTO)
  • Hazardous Materials Endorsements
  • Heavy Machinery Experience
  • Hand tools (Impact gun, Torque machine, buffer wheels, wire wheels)
  • Customer service skills
  • Equipment maintenance and repair
  • Accumulator operations. Open and close Hydraulic valves when needed.
  • Barricade inspector (green, yellow, red)
  • H2S monitor
  • 100% tie off
Work History
09/2020 to Current Heavy Machine Operator/Haul Truck Driver Veterans Health Administration | Olympia, WA,
  • Inspected truck for defects and safe operating condition before, during and after trips.
  • Completed daily inspections, basic maintenance and common repair actions to keep equipment operating at full capacity.
  • Maneuvered trucks into loading or unloading positions, following signals from loading crew to properly position vehicle and loading equipment.
  • Operated with safety and skill to avoid accidents and delays.
  • Conducted efficient cargo transfers to maintain route schedules.
  • Completed regular inspections and maintenance actions, as well as basic equipment repairs, to keep equipment operating at peak levels.
  • Get loaded up by excavator with material needed for job task of the day. (Dirt, Rock, Sand)
  • Reverse into difficult positions in a safely manner.
  • Safety of workers in my work area is my #1 priority.
  • Drive to and from excavator in a timely and safely manner.
  • Fuel up and grease up haul truck at end of work shift.
  • Check fluids (transmission oil, coolant, diesel, DEF) on a daily.
  • Cooperate and work as a team to get job done.
05/2018 to 03/2020 Lead Builder/Supervisor Valve Technician Marmon Holdings, Inc | Texarkana, AR,
  • Identified problems with valves and used appropriate troubleshooting techniques to locate and resolve concerns.
  • Conducted testing and diagnostics work on control valves and other equipment at customer locations.
  • Reviewed and disassembled control valves prior to completing skilled repairs.
  • Saved company thousands of dollars by implementing cost-saving initiatives that addressed long-standing problems.
  • Maintained excellent attendance record, consistently arriving to work on time.
  • Increased customer satisfaction by resolving non operating valves/leaked valves/failed valves in a timely manner.
  • Collaborated with team members to complete customer requests and orders on time.
  • Operated overhead, gantry and remote control cranes in according to safety processes and established procedures.
  • Positioned cranes in response to hand signals and observed load hookup to determine safe load capacities.
  • Increased performance by safely and efficiently operating heavy machinery and equipment.
  • Assembled/Disassembled Hydraulic and Manual gate valves. 7.15k , 7.10k , 5.15k , 4.15k , 4.10k , 2.15k valves.
  • Inspected all parts that came out of valve ( gate, seats, balance stem, operating stem).
  • Repaired top bonnets (Hydraulic/Manual). Changed out packing seal. Teflon seals. All hydraulic seals.
  • Operated overhead crane (10 ton/5 ton).
  • Rigged up valves, flow crosses, toe preps, verticals.
  • Did work for Anadarko, Oxy, Apache, EOG, Pioneer.
  • Supervised a crew of 12 workers. Worked together to meet our valve count for the day.
  • Operate impact gun/torque machine.
  • Use buffer wheel, wire wheel to fit valve pockets (where seats sit into).
10/2017 to 05/2018 Insulator Brock | City, STATE,
  • Cut, formed and arranged insulation to promote efficiency of materials for each project.
  • Inspected parts and assemblies for conformance to plans and building codes.
  • Determined required properties for each installation and chose optimal materials to meet demands.
  • Read and understood blueprints and technical specifications for insulation installation.
  • Maintained equipment according to manufacturer specifications and safety protocols.
  • Installed and secured protective sheet metal to minimize damage and degradation.
  • Fabricated and assembled sheet metal products and equipment such as ducts, control boxes, drainpipes and furnace casings.
  • Operated hand tools such as beader crimpers, brakes, and shears.
  • Measured, cut, and laid insulating blankets for water heaters and tanks.
  • Measured and prepared work materials and surfaces by marking dimensions and reference lines on material.
05/2016 to 06/2017 Sandblaster/Painter Apache | City, STATE,
  • Minimized disruption of client space and thoroughly cleaned up after completion of each job.
  • Obtained correct dimensions and specifications by properly measuring areas.
  • Prepared surfaces and surrounding areas for painting using sandpaper, tape and other materials.
  • Climbed scaffolding, staging, ladders and planks to reach work area surfaces and observed safety protocols to prevent falls.
  • Selected proper amount and type of thinners and accelerant to be used for each specific job.
  • Maintained thorough and accurate records of all disposed paint, paint tools and cleaning rags.
  • Build containment around work area so no grit or paint get on other work areas.
  • Housekeep work area before and after job is done.
  • Proper PPE at all times. No exceptions.
  • Used all safety precautions to prevent any job accidents and injuries.
  • Checked for painting conditions.
  • Roll out and roll up all hoses and necessary to get the job done.
  • Worked flexible schedule, including some holidays and weekends, depending on shifting needs of each project.
12/2014 to 04/2016 Fire Watch/Hole Watch/Flagger Total Safety | City, STATE,
  • Examined fire extinguishing and fire protection equipment to verify functionality and reported repairs and replacements needed.
  • Maintain visual surveillance of areas where hot work, welding and cutting with torches is being done.
  • Be properly trained with the fire extinguisher in case if a fire occurs all safety procedures and training will be put into place.
  • First line of defense.
  • Performed visual inspection of work area and evacuated operations and summoned authorities if hazardous conditions detected.
  • Prevented public from entering hazardous areas to maximize safety and security.
  • Assigned to different contractors/crews to be with them for a full shift to make sure no gases or fires occur during the duration of their shift.
  • Maintained team safety by controlling traffic around and within site.
  • Organized materials, tools and equipment to supply team members.
  • Used radios and hand signals to coordinate communication between equipment operators and ground workers.
04/2012 to 11/2014 Valve Technician Cameron Surface Services | City, STATE,
  • Collaborated with team members to complete customer requests and orders on time.
  • Identified problems with valves and used appropriate troubleshooting techniques to locate and resolve concerns.
  • Assembled/Disassembled Hydraulic and Manual gate valves. 7.15k , 7.10k , 5.15k , 4.15k , 4.10k , 2.15k valves.
  • Operated overhead crane. (10 ton, 5 ton)
  • Operated forklift to bring in any valves needed to rebuild for that day.
01/2011 to 04/2012 Merchandiser/Vendor Coca Cola Refreshments | City, STATE,
  • Worked with managers and advertising directors to optimize promotions.
  • Rotated manufacturer products as needed.
  • Monitored inventory levels and kept adequate stock in product displays on sales floor.
  • Assembled promotional displays, including quarter and full-size point of purchases.
  • Drove to different Walmart's/HEBs to check in truck loads and fill up aisle/displays and front coolers.
  • Condensed work area in back and made sure all product was out the way of other vendors and employees of store.
  • Met and fulfilled all the needs of store manager.
  • Took before and after pictures of all my stores and sent them to my supervisor.
  • Interviewed and worked closely with vendors to acquire and develop desired products.
  • Operated forklift as needed.
  • Completed stock orders and managed inventory levels.
  • Completed all job task in a timely but safely manner.
Education
Expected in 06/2011 to to | W.B. Ray High School, Corpus Christi, TX, GPA:
Expected in 02/2012 to to Basics/Business Management | Del Mar College, Corpus Christi, TX GPA:
Expected in 03/2017 to to Core Curriculum Occupational Safety NCCER | Welding Craft Training Center , Corpus Christi Texas , GPA:

By clicking Customize This Resume, you agree to our Terms of Use and Privacy Policy

Your data is safe with us

Any information uploaded, such as a resume, or input by the user is owned solely by the user, not LiveCareer. For further information, please visit our Terms of Use.

Resume Overview

School Attended

  • W.B. Ray High School
  • Del Mar College
  • Craft Training Center

Job Titles Held:

  • Heavy Machine Operator/Haul Truck Driver
  • Lead Builder/Supervisor Valve Technician
  • Insulator
  • Sandblaster/Painter
  • Fire Watch/Hole Watch/Flagger
  • Valve Technician
  • Merchandiser/Vendor

Degrees

  • Basics/Business Management
  • Core Curriculum Occupational Safety NCCER

By clicking Customize This Resume, you agree to our Terms of Use and Privacy Policy

*As seen in:As seen in: