Journeyman Lineman Foreman resume example

After completing apprenticeship I promoted to journeyman lineman with duke energy and quickly was recognized for knowledge and passion for the job and crew. This led me to fast promotion to sr lineman wich is a lead role usually overseeing a 3-4 man crew as well as executing the work my self I spent time doing transmission and distribution installing steel and wood poles and not only installing the equipment like switches, capacitors, re-closures, transformers and capacitors but operation them as well. Responded to call outs during all hours of the night and worked on holidays and weekends to repair faulty equipment as well as trouble conditions.

• Performed work on both dead and energized lines of different voltages.
• Worked quickly and safely to maintain and reconduct lines.
• Attached transformers to poles and connected to power lines.
• Replaced transmission poles and associated hardware with new equipment.
• Assisted in various capacities during construction, repair and maintenance of electrical lines.
• Adhered to strict federal and corporate rules to promote overall safety of workers and members of public.
• Assessed power lines, poles and electrical equipment for wear and damage and reported deficiencies to appropriate supervisor.
• Tested conductors to identify corresponding conductors and prevent incorrect connections.
• Compared layout and methods of installation to blueprints and sketches and marked differentiations on drawings.
• Opened switches or attached grounding devices to remove electrical hazards from disturbed or fallen lines.
• Referred unresolved customer grievances to designated departments for further investigation.
• Troubleshot overhead distribution lines to restore power service.
• Patrolled lines and reported defective equipment or unsafe conditions to supervisor for resolution.
• Tested and inspected electric distribution equipment and wiring outside and within buildings to verify conformance of installation with construction and building code specifications.
• Installed electric watthour meters in pre-installed meter-connection boxes to connect service.
• Identified site hazards and utilized safety and protective equipment to comply with safety rules.
• Used computer based software to configure metering and protection devices.
• Maintained safety and high quality of workmanship by following company standards and procedures and complying with legal regulations.
• Trained others with less experience and supported and participated in growth of co-workers and company.
• Strung wire conductors and cables between poles, towers, trenches, pylons and buildings, setting lines in place and using winches to adjust tension.
• Operated bucket trucks, lashers, core machines and powered hand tools safely and efficiently.
• Kept equipment in good operating condition by following operating instructions, troubleshooting breakdowns, performing preventive maintenance and informing management of needed repairs.
• Prepared installations by analyzing staking sheets and job sites, gathering required materials and supplies and locating existing cables and other utilities.
• Identified defective sectionalizing devices, circuit breakers, fuses, voltage regulators, transformers, switches, relays or wiring using wiring diagrams and electrical-testing instruments.
• Inspected and tested power lines and auxiliary equipment to locate and identify problems using reading and testing instruments.
• Bolstered customer confidence by keeping installation information confidential and maintaining professional job site demeanor and correspondence.
• Updated job knowledge by participating in educational opportunities such as trade print articles, exposure to more experienced technicians and other relevant areas of business and networking.

Hire date was aug 10 2010 for me at Duke energy Ohio/ky and during this apprenticeship I got exposure and experience in virtually every aspect of outside electrical utility work from transmission lattice towers and monopoles to underground distribution switchgear we got our hands in a little bit of everything but it was not easy being brought up to climb every pole and only allowed to use brace and bit to bore holes in on poles for mounting hardware I must say it did ensure everyone who was there wanted to be there and learned a lesson in work ethic.

• Operated overhead line equipment such as bucket and boom trucks with consistent safety.
• Maintained tools, equipment and vehicles in line with strict company standards.
• Helped operate digger derrick truck and dug rock holes.
• Climbed wood poles to install lines, change out transformers and connect new service.
• Assisted in various capacities during construction, repair and maintenance of electrical lines.
• Shortened or lengthened wires by removing or adding wire and used different types of splices, connectors and clamps.
• Adhered to strict federal and corporate rules to promote overall safety of workers and members of public.
• Identified site hazards and utilized safety and protective equipment to comply with safety rules.
• Used computer based software to configure metering and protection devices.
• Tested conductors to identify corresponding conductors and prevent incorrect connections.
• Climbed poles to compare printed data on transformers with work orders and examine wires and auxiliary equipment on poles.
• Patrolled lines and reported defective equipment or unsafe conditions to supervisor for resolution.
• Troubleshot overhead distribution lines to restore power service.
• Tested and inspected electric distribution equipment and wiring outside and within buildings to verify conformance of installation with construction and building code specifications.

When working at cold spring electric I was responsible for completing electrical and HVAC service calls and maintenance. I was also largely involved with larger projects such as new commercial construction, larg amperage multi gang service installs, rewires and production line relocation or expansions.

• Interpreted schematics, blueprints and diagrams to complete projects on time.
• Directed electricians on installation, maintenance and repair on electrical wiring and equipment.
• Adhered to specifications and codes in installation of electrical wiring, equipment and fixtures.
• Assessed, tested and operated variety of electrical components and systems.
• Worked extensively on three-phase, 277/480 volt power distribution systems.
• Identified and addressed hazards, defects and repair requirements through inspection of electrical equipment.