Electrical Apprentice Resume Example
Love this resume?Build Your Own Now
ELECTRICAL APPRENTICE
Professional Summary
Proficient electrical apprentice experienced in inspecting electrical systems and completing routine repairs. Dug trenches, drilled holes and broke up concrete to install conduits and system parts. Skilled with power and hand tools. Skilled Construction Worker with strong track record of success in maintenance, repair and general labor. Multitasks and works effectively in fast-paced, high-volume environments. Flexible work and shift schedule with expertise operating basic hand and power tools. Excellent work performance in individual and team roles combined with superior attendance record.
Work History
Arctic Slope Regional Corporation - Electrical ApprenticeFairbanks , AK06/2019 - 05/2020
- Helped complete system installations, digging trenches and breaking up concrete.
- Worked under supervision of Journeyman Electrician to learn trade and develop electrical knowledge.
- Safely installed new electrical components and light fixtures, conduit and pannels, testing systems to enhance power flow.
- Accurately pulled EMT and PVC conduit wire while maintaining safety standards.
- Measured and cut required supplies such as wire and conduit.
- Handled installation of electrical components by splicing, joining and connecting wire.
- Spliced, joined and connected wire to accurately install new electrical systems.
- Completed and checked wiring tasks through wall and floor conduits and holes accurately.
- Checked compatibility and safety of newly installed electrical systems and launched inspections and tests to confirm functionality.
- Safely pulled wire through EMT and PVC conduits while ensuring accuracy and efficiency.
- Repaired and checked supporting equipment for electrical systems such as brackets and hangers.
- Applied knowledge of trade tools and ability to read and follow blueprints and wiring plans to projects.
- Tested electrical systems and continuity of circuits in electrical wiring, equipment and fixtures using various testing devices.
- Consulted with supervisor electrician regarding likely risks associated with assigned job.
- Demonstrated expertise in use of cable reels, stripping tools, voltage detectors, crimping tools and wire and cable cutters to complete fast-paced work.
- Analyzed blueprints to diagnose potential electrical hazards and carried out risk assessments prior to starting new job.
- Properly stored and maintained power tools and equipment for each job.
- Complied with safety standards and codes per National Electrical Code.
- Enhanced quality control by inspecting condition of equipment and tools.
- Maintained clean, safe and stocked work area with appropriate equipment and supplies.
- Worked with various types of cableways, conduits and other electrical raceways.
- Worked collaboratively with clients, team members, implementation consultants and resources across company to achieve desired results.
- Worked extended hours on weekday and weekend projects.
- Installed and wired electrical hardware, including transformers, junction boxes, service panels, electrical boxes, switches and circuit breakers.
- Effectively worked with multi-craft team; providing wiring installation, preventive maintenance and testing of equipment.
- Performed electrical system installation of conduit, wire, power distribution and motor controls.
- Planned layout and installation of electrical wiring, equipment and fixtures based on specifications and applicable code.
- Read and interpreted electrical, mechanical and architectural drawings and electrical code specifications for wiring layouts.
Farmtek - Construction WorkerDyersville , IA09/2018 - 06/2019
- Used nail guns, saws and grinders safely and without incident.
- Examined wood, work areas and supplies for defects and damage prior to completing projects to determine accurate timelines and prices of projects.
- Cut, measured and shaped wood using powered tools after inspecting blueprints, build areas and work orders.
- Accurately and safely installed wall, roof and floor structures according to blueprints, customer requests and available inventories.
- Evaluated completed products to identify errors and verify conformance with production tolerances.
- Updated daily logs with production information and conferred with supervisor on improvement strategies to meet targets.
- Resolved problems, improved operations and provided exceptional client support.
- Developed team communications .
- Maintained excellent attendance record, consistently arriving to work on time.
- Scribed cutting lines on drywall and breaks board along cut lines.
- Completed jobs each quarter with superior quality and efficiency.
- Received consistent excellent feedback on work quality and customer service.
- Finished and trimmed drywall with professional-level quality.
- Completed installation of drywall sheets on commercial and residential properties.
- Prepared work area and materials for each day, including power cords, tools and equipment.
- Measured and marked cutting lines on drywall for lengths, heights and penetrations.
- Trained and mentored new hires.
- Laid out materials and system components to prepare for installation.
- Cleaned exterior of buildings using motorized power washer.
- Climbed scaffolding, staging, ladders and planks to reach work area surfaces and observed safety protocols to prevent falls.
- Cleaned and properly stored all equipment and supplies at end of each workday and removed trash and debris from work areas.
- Prepared surfaces and surrounding areas for painting using sandpaper, tape and other materials.
- Protected all surfaces from damage and spills by using drop cloths prior to and during painting.
- Applied putty, wood filler, spackling and caulks to prep uneven surfaces and fill in holes.
- Prepared trim, walls and ceilings for painting by cleaning, smoothing and priming.
- Worked flexible schedule, including some holidays and weekends, depending on shifting needs of each project.
- Applied primer, paints, varnishes and lacquers to walls and surfaces using traditional and sprayer methods.
- Applied paint with cloth, brush, sponge and fingers to create special effects.
- Taped around windows and fixtures prior to painting walls.
- Performed smoothing and finishing work on walls, trim and cabinetry.
- Painted surfaces using brushes, spray guns and paint rollers.
- Applied exterior caulking to building joints and seams.
- Painted indoor areas such as hallways, bathrooms and lobbies.
- Safely operated power sprayers and hand tools to prepare and paint large areas.
- Repaired defects in walls including holes and scrapes.
Moore's Electrical & Mechanical - Low Voltage TechnicianFayetteville , NC06/2017 - 03/2018
- Reviewed blueprints and project specifications ahead of time to fully understand all key details of job.
- Successfully managed multiple projects and several work teams on consistent basis.
- Installed and serviced various security, fire alarm and closed circuit TV systems for both residential and business clientele.
- Identified problematic components and wiring issues and applied troubleshooting techniques.
- Optimized performance by balancing systems and calibrating controls.
- Consulted with customers to trace malfunctions and identify root causes, completing speedy repairs to return full performance levels.
- Worked in strict compliance with applicable OSHA regulations and safety requirements.
- Repaired, replaced and serviced both residential and commercial HVAC equipment, components and wiring.
- Laid out electrical wiring to connect controls and equipment, adhering closely to wiring diagrams.
- Installed, connected and adjusted thermostats, humidistats and timers for optimal performance.
- Installed components to HVAC systems, such as expansions, discharge valves, air ducts, dampers and stokers.
- Maintained excellent attendance record, consistently arriving to work on time.
- Monitored building environmental conditions, including adjusting thermostats, terminal units and mixing boxes.
- Surveyed building layout and gathered materials before beginning repairs.
- Read blueprints, wiring diagrams, piping schemes and engineering specifications to diagnose and repair units.
- Worked overtime, holidays and weekends to accommodate company needs.
- Installed grounding and bonding to electrical gear
Skills
- Blueprints and Schematics
- Electrical Installation and Repair
- Electrical Work
- OSHA Requirements
- OSHA Standards
- Materials Handling
- Forklift trained
- Hand and power tool operation
- Bilingual
- Measure, cut, bend
- New Construction and Renovation
- Wiring Layouts
- Electrical Repair
- Finish Work
- Hazardous Chemical Handling
- Construction knowledge
- Safety and compliance
- Team building
- Operate lift and JLG
Education
06/2018Dr.Kirk Lewis Career And Technical High SchoolCityHigh School Diploma
Certifications
- OSHA 10 certified
- NCCER (construction management)
- JLG and lift licensed
- Electrical apprentice license
DISCLAIMER
Resumes, and other information uploaded or provided by the user, are considered User Content governed by our Terms & Conditions. As such, it is not owned by us, and it is the user who retains ownership over such content.
How this resume score could be improved?
Many factors go into creating a strong resume. Here are a few tweaks that could improve the score of this resume:
Resume Strength
- Length
- Measurable results
- Typos
Resume Overview
School Attended
- Dr.Kirk Lewis Career And Technical High School
Job Titles Held:
- Electrical Apprentice
- Construction Worker
- Low Voltage Technician
Degrees
- High School Diploma
Similar Resumes
