LiveCareer-Resume

driver resume example with 8+ years of experience

Jessica
Claire
resumesample@example.com
(555) 432-1000,
, , 100 Montgomery St. 10th Floor
:
Summary

Hardworking Efficient welder skilled in Tig,Mig and welding fabrication. Able to handle continuous physical work in different environments while exceeding standards. Able to use the correct techniques for different types of materials and fits. expert with a wide range of power tools,drills and saws. Very punctual and able to read and interpret blueprints and drawings. Able to follow procedures and protocols while working safely. committed and a fast learner that works well with others.

Skills
  • Verbal and Written Communication
  • [Type] Vehicles Expertise
  • Documentation and Recordkeeping
  • Route Management
  • Route Determination
  • Friendly and Outgoing
  • Problem-Solving
  • Calm Under Pressure
  • Valid Driver's License
  • Relationship Building
  • Safe Driving Techniques
  • Vehicle Maintenance
  • Time Management
  • Navigational Systems and GPS
  • Driving and Transportation
  • Customer Service
  • Punctual and Reliable
  • Traffic Law Observation
  • Loading and Unloading
  • Heavy Lifting
  • Safety Protocols
  • Vehicle Inspection
  • Schedule Management
  • Good Work Ethic
  • Problem Resolution
  • Active Listening
  • Team Management
  • Supervision & Leadership
  • Workpiece Measurements
  • Hand and Power Tool Operation
  • Surface Material Preparation
  • Power Tools Operation
  • Jig Fabrication
  • Gas Metal Arc Welding
  • MIG Welding
  • Job Orders
  • Weld Inspections
  • Welding Procedure Verification
  • TIG Welding
  • Precision Measurement
  • Post-Welding Treatment
  • Shielded Metal Arc Welding
  • Attention to Detail
  • Critical Thinking
  • Workpiece Examinations
  • Flat Welding Position
  • Defective Material Identification
  • Aluminum Metal Welding
  • Welding Techniques
  • Torch Installation
  • Torch Selection
  • Edge Joining
  • Vertical Welding
  • Gas Flow Adjustments
  • Decision Making
  • Equipment Selection
  • Stainless Steel Metal Welding
  • Micrometers and Calipers
  • Specification Conformance
  • Overhead Welding Position
  • Brakes and Shears Operation
  • Mathematical Calculations
  • Straightedge Measurements
Education and Training
John F Kennedy High NJ, Expected in 03/2003 GED : - GPA :
Experience
Brink's Incorporated - Driver
Syracuse, NY, 02/2022 - 01/2023
  • Retained valid proof of insurance and registration in vehicles.
  • Conducted vehicle inspections before and after every trip and performed minor repairs to keep truck functional.
  • Logged driving hours and fuel usage data on time to keep reports current.
  • Demonstrated safe driving by observing road rules, exercising caution in unfamiliar areas and maintaining vehicle control.
  • Loaded, balanced and secured product to safely transport goods.
  • Inspected truck for defects and safe operating condition before, during and after trips.
  • Read and interpreted maps to determine vehicle routes.
  • Established relationships with customers through use of interpersonal, active listening and inquiry response skills.
  • Delivered customer orders to homes and places of business within established time frames.
  • Provided top product shipment delivery quality control, eliminating downtime and maximizing revenue.
  • Conducted emergency roadside repairs, changed tires, replaced light bulbs and installed fuses and tire chains.
  • Drove tractor-trailer combinations to transport and deliver products, livestock or other materials.
  • Utilized pallet jacks and forklifts to load and unload materials off trucks.
  • Used ropes and blocks to safely secure cargo for transport.
  • Completed transfers at hubs and final destinations to keep routes on schedule.
  • Worked well with dispatchers to communicate route and schedule changes.
  • Maintained safe driving habits to protect property and general public on roadways.
  • Measured temperature of haul and refrigerated area of truck, keeping cold items fresh.
  • Maintained vehicle logs, records of cargo, or billing statements in accordance with regulations
  • Updated logs with timely and accurate information meet internal requirements and DOT recordkeeping demands.
  • Inspected trucks and trailers before and after trips and completed basic maintenance for optimal performance.
  • Planned efficient routes and adjusted strategies based on current weather and traffic information.
  • Recorded expenses and maintained receipts.
  • Observed driving regulations and safety procedures, maintaining excellent safe driving record.
  • Promoted positive customer service by delivering on-time shipments and fully resolving issues.
  • Obtained signatures needed to complete and process paperwork.
  • Conducted daily DOT pre-trip inspections according to set checklist.
  • Managed unexpected emergencies and route changes with calm and professionalism.
  • Added fluids, checked tires and kept interior and exterior spotless as part of vehicle upkeep.
  • Inspected vehicle and personally handled routine upkeep.
  • Processed shipment documents neatly and efficiently for each load.
  • Maintained telephone and radio contact with supervisor to receive delivery instructions.
  • Performed pre- and post-trip safety and maintenance checks to mitigate hazards.
  • Implemented daily DOT pre-trip inspections to reduce risks or delivery delays.
  • Inspected and maintained vehicle supplies and equipment to ensure vehicles remain in proper working condition.
  • Coordinated with dispatch to receive updates, communicate efficient routes and convey delays.
  • Maintained strict compliance with safety rules for passenger and driver protection.
  • Used pallet jack and forklift to load and unload products at distribution centers and route locations.
  • Followed regular schedule of pickups for individual customers and groups.
  • Responded quickly to customer complaints and gathered pertinent information to make educated decisions for remediation.
  • Reacted decisively and quickly to protect spoilage.
  • Prepared detailed reports outlining trip, vehicle and passenger details.
  • Notified customers of potential late deliveries, which resulted in [Number]% decrease in calls to company support line.
  • Maintained ongoing communications with [Job title] in operations center to keep teammates informed.
  • Performed [Timeframe] inspections and completed vehicle repairs.
Chromalox - Welding Fabricator
Lavergne, TN, 08/2018 - 02/2022
  • Cleaned and degreased weld joints and workpieces.
  • Heated, formed and dressed metal parts with hand tools, torch and arc welding equipment.
  • Prevented distortion of parts by monitoring fitting, burning and welding processes.
  • Completed precision cuts with power saws, hand shears and chipping knives.
  • Dismantled and assembled wellhead equipment.
  • Organized and cleaned work area and tools.
  • Read plans, instructions or specifications to determine work activities.
  • Operated equipment with strong focus on safety and ground communication.
  • Operated hand tools, saws, routers and sanding equipment to prepare materials and finish project surfaces.
  • Loaded or unloaded building materials to distribute machinery or tools.
  • Demonstrated best safety practices working at heights and lifting various objects.
  • Learned and mastered skilled trade specialties under guidance of expert mentors.
  • Removed damaged materials and prepared surfaces for optimal installations.
  • Supported project planning by collecting and documenting measurements, marking installation points and cutting materials to desired sizes.
  • Promoted team efficiency by consistently picking up excess materials and tools.
  • Lubricated, cleaned or repaired machinery or equipment.
  • Assisted with diverse construction challenges to help team and customer.
  • Transported supplies to work sites, removed from trucks and organized for crew use.
  • Read and followed blueprints and weld diagrams.
  • Used jigs, fixtures and tools for assembly of parts and components.
  • Made steel form parts using various cutting equipment and welded part together per specifications.
  • Deposited intermittent tack welds for fit-up and alignment of work assemblies.
  • Checked cut length frequently for deviation in cut length specs.
  • Informed forklift personnel or Shift Lead when running low on fab stock requiring welding.
  • Stacked finished product on pallets according to packaging standard.
  • Checked angle of pipe on angle table.
  • Welded components in flat, vertical or overhead positions.
  • Welded fabrication materials, continuously checking for safety and quality.
  • Prepared workpiece edges by grinding, cutting, buffing or bending to verify snug fit.
  • Prepared material surfaces for welding by removing scale, rust or other foreign matter.
  • Positioned and clamped workpieces together and properly assembled in jigs and fixtures.
  • Aligned and clamped workpieces using rules, squares or hand tools.
  • Measured workpieces with straightedges or templates to conform with specifications.
  • Recognized, set up and operated shielded metal arc and gas metal arc welding equipment.
  • Cleaned and inspected parts and assemblies at each production stage and documented production defects.
  • Marked or tagged material with job number, piece marks and other identifying marks.
  • Determined equipment and welding methods, applying knowledge of metallurgy, geometry and welding techniques.
Blickman - Fabrication Welder
City, STATE, 08/2014 - 06/2018
  • Melted and applied solder along adjoining edges of workpieces to solder joints.
  • Connected and turned regulator valves to activate and adjust gas flow and pressure and obtain desired flames.
  • Determined equipment and welding methods, applying knowledge of metallurgy, geometry and welding techniques.
  • Selected and installed torches, filler rods and flux according to welding chart specifications.
  • Marked or tagged material with job number, piece marks and other identifying marks.
  • Detected faulty operation of equipment or defective materials and notified supervisors.
  • Safely ignited torches and monitored surroundings to proactively identify hazards.
  • Recognized, set up and operated shielded metal arc and gas metal arc welding equipment.
  • Cleaned and inspected parts and assemblies at each production stage and documented production defects.
  • Measured workpieces with straightedges or templates to conform with specifications.
  • Produced work using appropriate welding techniques, metallurgy knowledge and engineering requirements.
  • Aligned and clamped workpieces using rules, squares or hand tools.
  • Positioned and clamped workpieces together and properly assembled in jigs and fixtures.
  • Read blueprints and drawings and took measurements to plan layout and procedures.
  • Set up equipment and welded parts according to welding chart specifications and type.
  • Used welding skills to help repair and maintain heavy-duty machinery.
  • Followed safety guidelines through proper machine guarding and lockout and tagout procedures.
  • Laid out, positioned, aligned and secured parts and assemblies with straightedges, squares and calipers.
  • Scraped off excess spatter using portable grinders and arc-cutting equipment.
  • Operated manual and semi-automatic welding equipment in vertical, horizontal and overhead positions.
  • Repaired structures by dismantling, reshaping and reassembling metal components with cutting torches and hand tools.
  • Maximized shop organization and equipment lifespan by maintaining equipment.
  • Prepared broken parts for welding by properly grooving and scarfing surfaces.
  • Operated manual and semi-automatic welding equipment to fuse metal segments together.
  • Completed minor torch ups with MIG welders.
  • Determined welding strategies using metallurgy knowledge, geometry and welding techniques.
  • Adjusted gas flow and pressure to create and maintain desired flames.

By clicking Customize This Resume, you agree to our Terms of Use and Privacy Policy

Your data is safe with us

Any information uploaded, such as a resume, or input by the user is owned solely by the user, not LiveCareer. For further information, please visit our Terms of Use.

Resume Overview

School Attended

  • John F Kennedy High

Job Titles Held:

  • Driver
  • Welding Fabricator
  • Fabrication Welder

Degrees

  • GED

By clicking Customize This Resume, you agree to our Terms of Use and Privacy Policy

*As seen in:As seen in: