Mechanic/Fabricator Resume Example EQIUPMENT SERVICE PROFESSIONALS INC

MECHANIC/FABRICATOR

Skills

blueprints, cables, calibration, Draw, fertilizers, forms, hand tools, hoists, hoisting equipment, inspect, inventory, irrigation, laser, layout, machinery, market, materials, move materials, mechanical, micrometer, paint, Pick, power tools, progress, project plans, Read, repairs, Research, test equipment, tops, troubleshoot, Weld, Welding

Experience

11/2015 to Current

Mechanic/fabricatorEQIUPMENT SERVICE PROFESSIONALS INC － Kuna, ID

Repair, replace damaged or worn parts.
Operate and inspect machines and heavy equipment to diagnose defects.
Diagnose faults or malfunctions to define required repairs using engine diagnostic equipment such as computerized test equipment calibration devices.
Dismantle as well as reassemble using hoists and hand tools.
Clean, lubricate and also perform other routine maintenance work on equipment vehicles.
Examine parts for damage or excessive wear using micrometer gauges.
Keep equipment service records along with overhauling test machines or equipment to make sure operating efficiency.
Assemble gear systems, fit bearings to adjust, repair, or overhaul mechanical, hydraulic, and pneumatic equipment.
Weld broken parts as well as structural members using mig, arc, and spool welding tools.
Clean parts by spraying them with grease solvent or immersing them in tanks of solvent.
Replace or repair subassemblies such as transmissions, heads, blocks and etc.
Fabricate any needed or necessary parts out of any kind of metal.
Repair, rewire and troubleshoot electrical problems.
Research, order and maintain parts inventory for necessary equipment and repairs.

05/2015 to 11/2015

LaborerARRIAGA CONSTRUCTION － Caldwell, ID

Verify vertical and horizontal alignment of structural steel members, using plumb bobs, laser equipment, transits, or levels.
Read plans, instructions, or specifications to determine work activities.
Connect columns, beams, and girders with bolts, following blueprints and instructions from supervisors.
Dig ditches or trenches, backfill excavations, or compact and level earth to grade specifications, using picks, shovels, pneumatic tampers, or rakes.
Hoist steel beams, girders, and columns into place, using cranes, or signal hoisting equipment operators to lift and position structural-steel members.
Position, join, align, or seal structural components, such as concrete wall sections or pipes.
Bolt aligned structural steel members in position for permanent riveting, bolting, or welding into place.
Measure, mark, or record openings or distances to layout areas where construction work will be performed.
Ride on girders or other structural steel members to position them or use rope to guide them into position.
Load, unload, or identify building materials, machinery, or tools, distributing them to the appropriate locations, according to project plans or specifications.
Pull, push, or pry structural steel members into approximate positions for bolting into place.
Position or dismantle forms for pouring concrete, using saws, hammers, nails, or bolts.
Cut, bend, or weld steel pieces, using metal shears, torches, or welding equipment.
Lubricate, clean, or repair machinery, equipment, or tools.
Fasten structural steel members to hoist cables, using chains, cables, or rope.
Operate jackhammers or drills to break up concrete or pavement.
Assemble hoisting equipment or rigging, such as cables, pulleys, or hooks, to move heavy equipment or materials.
Smooth or finish freshly poured cement or concrete, using floats, trowels, screeds, or powered cement finishing tools.
Force structural steel members into final positions, using turnbuckles, crowbars, jacks, or hand tools.
Tend pumps, compressors, or generators to provide power for tools, machinery, or equipment or to heat or move materials, such as asphalt.
Unload and position prefabricated steel units for hoisting as needed.
Mix, pour, or spread concrete, using portable cement mixers.
Drive drift pins through rivet holes to align rivet holes in structural steel members with corresponding holes in previously placed members.
Apply caulking compounds by hand or caulking guns to protect against entry of water or air.
Dismantle structures or equipment.

06/2013 to 05/2015

LaborerCRAIG BRAISHER － Homedale, ID

Set up and operate irrigation equipment.
Operate tractors, tractor-drawn machinery, and self-propelled machinery to plow, harrow and fertilize soil, or to plant, cultivate, spray and harvest crops.
Repair and maintain farm vehicles, implements, and mechanical equipment.
Apply pesticides, herbicides or fertilizers to crops.
Inform farmers or farm managers of crop progress.
Clear and maintain irrigation ditches.
Repair farm buildings, fences, and other structures.
Load agricultural products into trucks, and drive trucks to market or storage facilities.
Set up and operate irrigation equipment.
Operate tractors, tractor-drawn machinery, and self-propelled machinery to plow, harrow and fertilize soil, or to plant, cultivate, spray and harvest crops.

05/2012 to 06/2013

LaborerJIMS UPHOLSTERY － Nampa, ID

Fit, install, and secure material on frames, using hand tools, power tools, glue, cement, and/or staples.
Build furniture up with loose fiber stuffing, cotton, felt, and/or foam padding to form smooth rounded surfaces.
Examine furniture frames, upholstery, springs, and webbing to locate defects.
Attach fasteners, grommets, buttons, buckles, ornamental trim, and other accessories to covers or frames, using hand tools.
Remove covering, webbing, padding, and/or defective springs from work pieces, using hand tools such as hammers and tack pullers.
Draw cutting lines on material following patterns, templates, sketches, or blueprints, using chalk, pencils, paint, or other methods.
Make, restore, and/or create custom upholstered furniture, using hand tools and knowledge of fabrics and upholstery methods.
Measure and cut new covering materials, using patterns and measuring and cutting instruments, following sketches and design specifications.
Discuss upholstery fabrics, colors, and styles with customers, and provide cost estimates.
Repair furniture frames and refinish exposed wood.
Operate sewing machines or sew upholstery by hand to seam cushions and join various sections of covering material.
Pick up and deliver furniture.
Interweave and fasten strips of webbing to the backs and undersides of furniture, using small hand tools and fasteners.
Adjust or replace webbing, padding, and/or springs, and secure them in place.
Stretch webbing and fabric, using webbing stretchers.
Design upholstery cover patterns and cutting plans, based on sketches, customer descriptions, or blueprints.
Make, repair, and/or replace automobile upholstery and convertible and vinyl tops, using knowledge of fabric and upholstery methods.

Education and Training

May 2015

High School DiplomaHomedale High School － Homedale, ID

High school graduate

diploma

Resume Overview

Companies Worked For:

EQIUPMENT SERVICE PROFESSIONALS INC
ARRIAGA CONSTRUCTION
CRAIG BRAISHER
JIMS UPHOLSTERY

School Attended

Homedale High School

Job Titles Held:

Mechanic/fabricator
Laborer

Degrees

High School Diploma
High school graduate
diploma

Mechanic/fabricator Resume Example

Resume Score: 100%

Resume Overview

Create a job alert for [job role title] at [location].

Similar Resumes