LiveCareer-Resume

Industrial Maintenance Technician resume example with 20+ years of experience

Jessica Claire
  • Montgomery Street, San Francisco, CA 94105 609 Johnson Ave., 49204, Tulsa, OK
  • H: (555) 432-1000
  • C:
  • resumesample@example.com
  • Date of Birth:
  • India:
  • :
  • single:
Summary

Proven Industrial and Facility/Building Maintenance Technician with strong electrical and mechanical skills with 20 years of experience as a Maintenance Technician. Expert knowledge as a problem solver with strong electrical and mechanical skills including carpentry, HVAC, schematic/blueprint reading and plumbing. Also highly skilled at implementing and coordinating designed repair plans (work orders) and workplace safety.

Proven Maintenance Technician with exceptional record of strategic approaches to indicate operational efficiency with machines and equipment in plants. Expert knowledge with adjusting system components or removing and replacing defective parts. Excellent problem solver with strong electrical and mechanical skills.

Skills
  • New equipment installation, troubleshooting, and repair of all facility, building and plant electrical and mechanical equipment
  • Workplace safety and 5S compliance
  • Maintenance job scheduling
  • Maintenance job planning
  • Writing Work Orders
  • Lock/out/Tag/out procedure
  • Blueprint/Schematic/Structural Drawing Readings
  • Hydraulics
  • Pneumatics
  • Certified Maintenance Instructor
  • Certified CPR Instructor thru Red Cross
  • Supervision
  • Journeyman Machinist
  • Plumbing
  • Rigging/Overhead Crane/flagging hand signals
  • Welding (stick/mig/tig)
  • HVAC
  • Mechanical Repair
  • Codes compliance
  • Diagnostics Certification
  • Troubleshooting strength
  • Power and hand tool use
  • Understanding schematics
  • Electrical Certification
  • OSHA
  • Safety-oriented mindset
  • Maintenance scheduling
  • Organizational ability
  • Equipment repair
  • Reporting and documentation
  • System installations
  • Mechanical aptitude
  • Blueprint interpretation
  • Welding abilities
  • Repair expertise
  • Technical proficiency
  • Troubleshooting skills
  • Safety testing
Experience
Industrial Maintenance Technician, 03/2015 - 11/2019
Carlisle Syntec, Inc. Nashville, TN,
  • Selected troubleshooting methodologies to find malfunctions in machine systems to conduct repairs.
  • Installed and repaired basic mechanical systems, hydraulic systems, pneumatic systems and process control systems.
  • Diagnosed electrical, mechanical and plumbing problems to apply corrective action for operational efficiency.
  • Interpreted schematic drawings and diagrams prior to performing required maintenance.
  • Read and interpreted technical documents blueprints to disassemble and reassemble equipment for repairs and component replacements.
  • Engaged in troubleshooting of machinery malfunctions through use of testing instruments and observation of defective equipment, listening and visually analyzing for sources of problems.
  • Facilitated optimal efficiency in machinery with thorough cleaning, lubricating and adjustment of components.
  • Performed regular preventative maintenance on machinery and mechanical equipment to maintained continued operation and operator safety.
  • Operated welding equipment such as plasma cutter and might welder to cut, join, repair and fabricate components and equipment.
  • Adhered to safety, health and environmental rules and regulations to avoid workplace injury and machine productivity.
  • Operated hoists and tools to safely handle and move parts and equipment.
  • Improved operations by working with team members and customers to find workable solutions.
  • Earned reputation for good attendance and hard work.
Maintenance Technician, 10/2010 - 03/2015
Encompass Health Athens, TN,
  • Responsible for troubleshooting, repair, overhaul and new installation on all facility and plant equipment.
  • Including KBA and Mitsubishi Printing Presses, Bobst cutters, Bobst gluers and Marquip sheeters.
  • Monitored machine operation and verified performance met production requirements.
  • Selected troubleshooting methodologies to find malfunctions in machine systems to conduct repairs.
  • Adjusted plant equipment to maintain proper performance and safe operating conditions.
  • Conducted preventive maintenance and repairs on [Equipment].
  • Installed and repaired basic mechanical systems, hydraulic systems, pneumatic systems and process control systems.
  • Diagnosed electrical, mechanical and plumbing problems to apply corrective action for operational efficiency.
  • Operated hoists and tools to safely handle and move parts and equipment.
  • Interpreted schematic drawings and diagrams prior to performing required maintenance.
  • Engaged in troubleshooting of machinery malfunctions through use of testing instruments and observation of defective equipment, listening and visually analyzing for sources of problems.
  • Read and interpreted technical documents blueprints to disassemble and reassemble equipment for repairs and component replacements.
  • Adhered to safety, health and environmental rules and regulations to avoid workplace injury and machine productivity.
  • Kept accurate records of malfunctions, equipment and parts used and maintenance performed using [Software].
  • Operated welding equipment such as [Tool] and [Tool] to cut, join, repair and fabricate components and equipment.
  • Provided excellent service and attention to customers when face-to-face or through phone conversations.
  • Earned reputation for good attendance and hard work.
  • Utilized drawings, blueprints and schematics of building and systems layout as well as machinery construction.
  • Installed new systems, replacement parts and components to maintain proper operation.
  • Mentored junior maintenance professionals to provide instruction on correct repair procedures.
  • Oversaw preventive maintenance on electrical panels, [Equipment] and [Equipment].
  • Performed simple carpentry tasks, including installing shelves, hooks and closet rods to meet customer needs.
  • Evaluated systems in use to uncover problems, complete maintenance and recommend solutions.
  • Collaborated with building managers to assess ongoing needs and plan preventative maintenance schedules.
  • Diagnosed equipment malfunctions and completed repairs to restore equipment and maintain uptime.
  • Consulted blueprints and repair manuals to complete high-quality repairs and restore optimal functionality.
  • Used brushes, rollers, spray equipment and paint to paint variety of interior and exterior surfaces.
  • Used electrical drawings to troubleshoot and repair electromechanical and various other systems.
  • Cleaned and lubricated machinery shafts, bearings and gears.
  • Performed general maintenance on machinery and equipment to prevent malfunctions.
  • Changed HVAC filters and cleaned condensation drains to perform preventative maintenance on HVAC systems.
  • Inspected electrical components to identify defects and hazards and to make necessary adjustments.
  • Repaired leaking faucets, clogged toilets and other equipment to keep bathrooms fully functional.
  • Replaced wall sockets, ran lines and completed basic carpentry to finish installations.
  • Diagnosed and repaired mechanical issues.
  • Operated hand and power tools to complete repairs.
  • Diagnosed problems with mechanical and electrical systems and equipment using advanced troubleshooting abilities.
  • Performed routine inspection and maintenance of equipment.
  • Used rulers and micrometers to inspect parts to determine changes in dimension requirements.
  • Routinely inspected equipment for preventive and emergency maintenance needs.
  • Installed new systems, replacement parts and components to maintain proper operation.
  • Evaluated systems in use to uncover problems, complete maintenance and recommend solutions.
  • Diagnosed equipment malfunctions and completed repairs to restore equipment and maintain uptime.
Industrial Maintenance Technician, 09/2001 - 10/2010
Carlisle Syntec, Inc. Rancho Cucamonga, CA,
  • Responsible for troubleshooting, repair, overhaul and new Installation on all facility and plant equipment.
  • Including diesel engines, pumps, large motors, valves, and turbines.
  • Including performing the role as supervisor and maintenance instructor.
  • Selected troubleshooting methodologies to find malfunctions in machine systems to conduct repairs.
  • Monitored machine operation and verified performance met production requirements.
  • Adjusted plant equipment to maintain proper performance and safe operating conditions.
  • Used [Tool] and [Tool] to adjust mechanical equipment, improving functionality [Number]%.
  • Conducted preventive maintenance and repairs on [Equipment].
  • Installed and repaired basic mechanical systems, hydraulic systems, pneumatic systems and process control systems.
  • Operated hoists and tools to safely handle and move parts and equipment.
  • Interpreted schematic drawings and diagrams prior to performing required maintenance.
  • Studied statistics, interpreted diagrams and analyzed requirements involved in production to improve efficiency of operations.
  • Adhered to safety, health and environmental rules and regulations to avoid workplace injury and machine productivity.
  • Read and interpreted technical documents blueprints to disassemble and reassemble equipment for repairs and component replacements.
  • Engaged in troubleshooting of machinery malfunctions through use of testing instruments and observation of defective equipment, listening and visually analyzing for sources of problems.
  • Facilitated optimal efficiency in machinery with thorough cleaning, lubricating and adjustment of components.
  • Performed regular preventative maintenance on [Type] machinery and mechanical equipment to maintained continued operation and operator safety.
  • Kept accurate records of malfunctions, equipment and parts used and maintenance performed using [Software].
  • Analyzed machine error messages and diagnostic test results to identify faults.
  • Provided excellent service and attention to customers when face-to-face or through phone conversations.
  • Earned reputation for good attendance and hard work.
Facilities Maintenance Technician, 07/2019 - 11/2021
Cb Richard Ellis Tallahassee, FL,
  • Inspected facilities and proactively detected and diagnosed potential or actual maintenance or repair needs by listening, looking and using precision measuring and testing instruments.
  • Performed building and equipment maintenance and repairs, including heating, ventilation, air conditioning, carpentry, plumbing, electrical, vehicular and machinery work.
  • Recorded facilities work in official logs and meticulously tracked and followed recommended maintenance schedules to keep company operating smoothly and meeting customer needs.
  • Diagnosed problems with mechanical and electrical systems and equipment using advanced troubleshooting abilities.
  • Inspected electrical components to identify defects and hazards and to make necessary adjustments.
  • Changed HVAC filters and cleaned condensation drains to perform preventative maintenance on HVAC systems.
  • Rebuilt machinery per manufacturers' designs and retrofitted and upgraded machinery per in-house design to improve equipment reliability or performance and optimize production.
  • Used brushes, rollers, spray equipment and paint to paint variety of interior and exterior surfaces.
  • Performed simple carpentry tasks, including installing shelves, hooks and closet rods to meet customer needs.
  • Evaluated systems in use to uncover problems, complete maintenance and recommend solutions.
  • Contributed to operational quality and efficiency via instrumental calibration, application of quality controls and implementation of maintenance functions.
  • Disassembled [Type] and [Type] machinery and equipment to remove parts and make repairs.
  • Performed building and equipment maintenance and repairs by doing heating, ventilation, air conditioning, carpentry, plumbing, electrical, vehicular and machinery work.
  • Trained company teams to recognize and report serious or dangerous mechanical and electrical problems immediately and to perform basic maintenance without need for mechanic.
Education and Training
Associate of Applied Science: Industrial Maintenance Technology, Expected in 05/2000
-
Chattanooga State Community College - Chattanooga, TN
GPA:
4 Year Apprenticeship/Journeyman: Multi Skill Maintenance Technology, Expected in 09/2005
-
TVA JOURNEYMAN MACHINIST - Chattanooga, TN
GPA:

By clicking Customize This Resume, you agree to our Terms of Use and Privacy Policy

Your data is safe with us

Any information uploaded, such as a resume, or input by the user is owned solely by the user, not LiveCareer. For further information, please visit our Terms of Use.

Resume Overview

School Attended

  • Chattanooga State Community College
  • TVA JOURNEYMAN MACHINIST

Job Titles Held:

  • Industrial Maintenance Technician
  • Maintenance Technician
  • Industrial Maintenance Technician
  • Facilities Maintenance Technician

Degrees

  • Associate of Applied Science
  • 4 Year Apprenticeship/Journeyman

By clicking Customize This Resume, you agree to our Terms of Use and Privacy Policy

*As seen in:As seen in: