309a apprentice resume example with 15+ years of experience

Jessica Claire
  • Montgomery Street, San Francisco, CA 94105 609 Johnson Ave., 49204, Tulsa, OK
  • H: (555) 432-1000
  • C:
  • Date of Birth:
  • India:
  • :
  • single:
  • :

I am highly trained in safely operating various types of heavy to small equipment in high paced production environments. I take pride in my work on a daily basis and strive to better myself and others. I have been trained in safe work practices since I started in the forestry industry when I was 18. I am excellent at multitasking and working under pressure while doing everything in a safe and productive manner.

  • Skills and Qualifications
  • EMS Training
  • Heavy equipment operator mining and forestry
  • Train the trainer forestry roads and pit construction
  • Saw mill operations
  • Forestry operations
  • Surface and underground mining operation
  • Sustainable Forest Management Training
  • I operate many different types and styles of heavy,
  • Medium and small scale mechanical equipment
  • Multiple different Fire training sessions and scenarios
  • Multiple different Safety, environmental training and
  • Information sessions
  • Underground mine rescue trained 7+ yrs. up to the
  • Advanced skill level
  • Work well in team settings
  • Work well independently
  • Occupational Health and Safety certification training
  • Parts one and two
  • Train the Trainer : Mechanical Harvesting/Forestry
  • Pit & Road Construction Equipment Operator
  • Train the Trainer Generic
  • Good ability to think outside the box to overcome
  • Problems when they occur in an everyday work
  • Environment
  • Knowledge and beginners level of SAP use at from
  • Helping out in the EF Eacom warehouse purchasing
  • And receiving dept.
  • Good communication skills
  • Attention to detail
  • Leadership skills
  • Life skills
  • Chain saw certification
  • First Aid trained 15 + yrs.
  • Very versatile
  • Quick Learner
  • WHMIS 20Yrs
  • Common Core mechanical harvesting
  • Common core Hard Rock Mining
  • Completed competent supervisor course
  • Basic lumber grading
  • Overhead crane course Ontario
  • Forklift certified Ontario
  • Skid steer certified
  • Firefighting certificate from working in mechanized
  • Harvesting
  • Knowledge of fire suppression systems and
  • Maintenance of and or erecting
  • Keen eye for safety and environmental issues in the
  • Workplace and following up with corrective actions
  • Prospecting experience
  • Geologist assistant
  • Underground hard rock mining common core and
  • Forestry common core
  • Business cost saving techniques
  • Working at heights
  • Forestry Heavy Equipment Operator
  • Victory logging, Simmons logging, R&W Timber and Ear Falls Contracting all being based out of the Ear Falls Township with
  • The exception of Raleigh Falls Timber and Ricci trucking that are a business based in Dryden on. But also having an Ear Falls division
  • Which I was working in.
  • Problem-Solving
  • Construction Quality Standards
  • Schematic and Blueprint Reading
  • Tool Maintenance and Storage
  • Clean Finish Work
  • Calculations and Measurements
  • Blueprint Reading
  • Attention to Detail
  • Work Prioritization
  • Work Site Organization
  • Verbal and Written Communication
  • Teamwork and Collaboration
  • Hand and Power Tool Expertise
  • Time Management
  • Regulatory Compliance
  • Logging Paperwork
  • Hand and Power Tools
  • Relationship Building
  • Loading and Unloading
  • Equipment Operation
  • Demolition Assistance
  • Installation Projects
  • Mechanical Troubleshooting
  • Heavy Lifting
  • Quality Inspections
  • Safety Understanding
  • Basic Math
  • PPE Use
  • Maintenance & Repair
309A Apprentice , 01/2021 - Current
Progressive Logistics Aurora, CO,
  • I am currently working as an electrical apprentice for Anderson Electric
  • I do residential, construction and commercial electrical services as an apprentice also going underground in the red lake mines to perform electrical services mostly on the seismic expansion and maintenance of seismic instruments
  • I am a first year apprentice in 309A
  • Worked closely with mentors to understand project objectives.
  • Maintained organization, cleanliness and safety in work areas.
  • Completed semi-skilled and skilled work under supervision of fully qualified professionals.
  • Operated hand and power tools and diagnostic equipment to complete various aspects of jobs.
  • Embraced ongoing education and learning opportunities to develop new skills.
  • Shadowed craft experts and supervisors to learn wide range of simple and complex techniques.
  • Assisted colleagues in accomplishing planned procedures or activities to increase productivity.
  • Transported items and tools from truck to work locations.
  • Used strong verbal and written communication skills to convey messages to others.
  • Moved and held materials for senior professionals to complete work.
  • Completed workshops and off-the-job training to achieve job competencies.
  • Studied project specifications to determine appropriate construction methods.
  • Covered surfaces with dropcloths or masking tape and paper, protecting surfaces during construction activities.
  • Completed tear-down of existing structures to prepare for new construction.
  • Communicated with management and customers at project completion and verified customer satisfaction with finished work.
  • Prepared construction sites, materials and tools for specific projects and loaded and unloaded equipment and products.
  • Engaged in preparation work to ready worksite for installers.
  • Moved construction materials by hand or various transport methods.
  • Read and interpreted construction blueprints for various projects.
  • Removed debris, garbage and dangerous materials from sites and assembled and broke down ladder equipment.
  • Followed safety, environmental and regulatory policies by properly handling and disposing of hazardous waste.
  • Performed demolitions, installed remodeling products according to company standards and procedures and learned finishing work for installations and remodels.
  • Followed company and governmental health and safety regulations and trained new team members.
  • Operated pneumatic hammers, vibrators and tampers and performed complex and advanced construction tasks.
  • Assisted tradesmen and machine operators in construction projects.
  • Signaled and guided heavy equipment operators and secured special attachments to construction machines.
  • Maintained construction vehicles and equipment in top operating condition.
Maintenance Worker, 01/2018 - 01/2022
Securitas Security Services Usa, Inc. Benton Harbor, MI,
  • I started on production in the saw mill with my first job being trained on the trimmer then moved to a lead hand position of the saw mill crew which in turn I learned a lot about the upper sawmill operations while being in the role of crew leader
  • Later on I took a job opportunity as Planer man operating the planer and doing my best to help keep the entire planer production floor in maintaining the mechanical equipment during break downs and or preventative maintenance
  • I would also help production technicians as required when planer crews were shorthanded or for employee breaks
  • As noted above it was same for me while working in the planer area as it was in the upper sawmill for learning much about how they operate the production floor
  • Near the end of 2020 I worked in the Eacom purchasing, shipping and receiving department at which time I gained some knowledge of using SAP as well as other duties of a purchaser
  • Currently I still work with maintenance doing a variety of different jobs and tasks property wide ranging from fire protection PMs to helping maintain a safe workplace in general
  • Also being a certified active member of the OH&S team.
  • Operated hand tools and power tools to make minor maintenance repairs and maintain grounds and walks.
  • Identified problems during daily work inspections and addressed concerns.
  • Maintained clear and safe workspace areas to meet OSHA standards.
  • Notified management about necessary repairs or professional service needs for building operating systems.
  • Performed tasks to maintain on-site physical security, safety and efficiency.
  • Repaired minor carpentry, electrical and plumbing issues to return equipment to functionality.
  • Collaborated with team members to assess equipment performance needs.
  • Cleaned vents and replaced filters to verify proper air flow.
  • Read work orders or received instructions from supervisors or homeowners to determine work requirements.
  • Maintained compliance with internal and regulatory safety standards.
  • Removed snow from sidewalks, driveways and parking areas.
  • Followed correct procedures for handling, transporting and disposing of new and recycled materials.
  • Diagnosed equipment malfunctions and performed repairs to restore equipment and maintain uptime.
  • Calculated required materials needed based on field measurements or work orders.
  • Changed air conditioning filters to improve indoor air quality and help HVAC system perform properly.
  • Examined alarm systems and portable fire extinguishers for physical damage requiring repair.
  • Inspected heating, ventilation and air-conditioning systems for efficiency to help maintain good indoor air quality.
  • Used rulers and micrometers to inspect parts and determine dimension requirements.
Underground Miner, 01/2009 - 01/2015
Accent Controls, Inc Gap, PA,
  • I operated heavy equipment in forestry for mechanical harvesting operations, log haul cut to length operations, mobile chipper operations and pit and road construction operations
  • My duties on shift work were to perform preventative maintenance on machinery such as, lubrication, fluid level checks and top ups, pre and post operational checks of equipment were always a must, good housekeeping at all times, helping HD mechanics with fixing equipment during mechanical downtime, safe working practices and preventative maintenance such as oil and filter changes ect
  • Operating the equipment to its full production capabilities during run time was a must
  • The types of equipment I operated in this field range from fork lifts, excavators, rock trucks, mobile chipper, grapple skidder, front end loader, DE limber with knuckle boom and or a slide rail and few different models of processors as well
  • I worked underground at the Red Lake Gold Mine which all began after a three month common core training program to be completed and passed at a satisfactory grade in order to be accepted
  • During my time at the mine site above and underground I worked for the underground construction group, drill and blast, load haul and dump, nipping, mine rehabilitation, shaft maintenance crew, cage and skip tending, central blasting and secondary blasting certification and road and sump maintenance crew all well being continually trained with the mine rescue team learning many different skills many to which come in handy for everyday life and new work places to this day
  • Working underground in wide variety of different roles I operated heavy equipment such as scoops, rock trucks, mine tractors, man carriers, loci, fork lifts, scissor lifts and boom trucks along with many different tools
  • An example of when working hands on with the construction crew I performed many different duties such as shotcreting, cement work, drilling ground support, stope cleaning and set up with different types of equipment and tools for paste fill preparation that assist in the production of underground mining moving forward.
  • Processed [Number] tons of material per shift to meet production deadlines.
  • Adhered to safety protocols by maintaining awareness of markings, grade stakes and hand signals while operating equipment.
  • Operated equipment to transfer materials between workstations.
  • Maintained and sanitized work areas to achieve safe equipment operation.
  • Maintained fast-paced schedules by loading materials onto vehicles using loading machine.
  • Cleaned, sanitized and maintained equipment and tracks, walkways and conveyor decking to maintain safe work area.
  • Operated levers to move conveyor booms and shovels to place coal, rock, ore and other mining contents for transportation.
  • Analyzed technical documents and executed written instructions to complete accurate production tasks.
  • Ran complex machinery to transport and manipulate coal, ore and rock.
  • Moved mine cars into position for loading and unloading.
  • Assessed excavated materials, verifying content weight and documenting progress.
  • Measured, weighed and verified rock, gravel and other excavated material levels to prevent equipment overload.
  • Opened and closed bottom doors of cars in order to dump contents.
Heavy Equipment Operator , 05/2004 - 05/2008
Ear Falls Contracting City, STATE,
  • Followed safety regulations while operating equipment to achieve safe conduct.
  • Operated excavators and other construction equipment to properly grade land.
  • Operated front end loader to move dirt and different base materials.
  • Loaded and offloaded rocks, debris and other materials from heavy equipment.
  • Transported materials around construction sites to work locations.
  • Performed pre-shift and post-shift equipment inspections and accurately completed reports to support company policy.
  • Operated digging and transporting equipment to efficiently fulfill project requirements.
  • Kept equipment fueled and ready for immediate use to support scheduling demands.
  • Followed signals from ground crew and other operators to safely move materials and prevent dangerous interactions or missed cues.
  • Learned about new equipment and related attachments while maintaining knowledge of items used daily to meet job requirements.
  • Identified hazardous materials on job sites and took action to mitigate and enhance safety.
  • Inspected faulty equipment to identify and address root causes.
  • Loaded both raw materials and finished components to support manufacturing and production processes.
  • Loaded and moved dirt, rocks, equipment and materials.
  • Maintained equipment on-site with regular maintenance and repairs.
  • Operated heavy equipment to demolish current structures, remove plants or trees and clear property of debris.
  • Coordinated machine operations with other site personnel to keep materials moving smoothly and prevent accidents.
  • Operated equipment to remove debris, snow or other equipment from streets and work areas.
Education and Training
Grade 12 Diploma: , Expected in 07/2021
Red Lake District High School - Red Lake - , ON
Status -

By clicking Customize This Resume, you agree to our Terms of Use and Privacy Policy

Your data is safe with us

Any information uploaded, such as a resume, or input by the user is owned solely by the user, not LiveCareer. For further information, please visit our Terms of Use.

Resume Overview

School Attended

  • Red Lake District High School - Red Lake

Job Titles Held:

  • 309A Apprentice
  • Maintenance Worker
  • Underground Miner
  • Heavy Equipment Operator


  • Grade 12 Diploma

By clicking Customize This Resume, you agree to our Terms of Use and Privacy Policy

*As seen in:As seen in: