LiveCareer-Resume

solids control technician resume example with 12+ years of experience

Jessica Claire
  • , , 609 Johnson Ave., 49204, Tulsa, OK 100 Montgomery St. 10th Floor
  • H: (555) 432-1000
  • C:
  • resumesample@example.com
  • Date of Birth:
  • India:
  • :
  • single:
Summary

Versatile Solid Controls Technician, Equipment Operator and Leader with expertise in:

Centrifuges
•Traveled to rig locations for setting-up, tearing-down, monitoring and maintaining centrifuges and processing related equipment.
•Experienced in running Alpha Laval Variable Frequency Drive centrifuges Working at shop level: Duties include keeping current inventory of equipment.
•Operated centrifuges to process drill cuttings, while keeping the drilling rigs drill mud conditioned and up to proper standards.
•Rigged up and rigged down solids control equipment ranging from centrifuges, mud cleaners, gas busters, and chokes.
•Operated and maintained the upkeep of all site equipment and centrifuges, including small repairs, painting, and cleaning.
Electrical Issues
•Provide Exceptional Customer service, Maintain and operate solids control equipment, Troubleshoot and repair of electrical issues.
Front End Loader
•Operated heavy equipment such as front end loader, excavator, extend a boom, man lift, and skid
steer.
•Front end loader work, loading trucks, unloading trucks, scooping dirt and solids and back dragging the yard.
•Front end loader, track hoe, and other equipment are also used in this set-up.
•Operated front end loaders and zoom boom loaders to load and unload trucks and move chemicals.
•Use a front end loader to process drill cuttings and prepare them for disposal.
Equipment Maintenance
•Ensured that equipment maintenance was completed and documented showing equipment is working properly.
•Reviewed, revised and implemented equipment maintenance procedures.
•Used advanced skills in equipment maintenance operations to ensure successful and safe drilling.
•Provide solids control services (including centrifuge operations, dewatering, disposal, equipment maintenance, excavator ops, ect.)
Augers
•Maintain dryers, shakers, pumps, augers, disposal, and kept equipment clean
•Help run centrifuge and verti g dryer, Auger etc.
Dryers
•Used a track hoe while working on vertical dryers to consistently feed the hopper so cuttings could be hauled off site.
•Maintained equipment such as: excavator, dryer package, centrifuge, dryer shakers, and shaker screens.
•Use Excavator to feed Vertical Dryer, mix solids with fly ash to be hauled to disposal.
•Utilized, maintained, repaired, and operated a variety of dryer shakers.
•Ran and maintain solids control, dryer and catch bins.

Highlights
  • Equipment Operator including: Back-hoe, Track-hoe, Loader, Scraper, Dozer, Articulated Dump Truck, Large Haul Trucks, Skid-steer, Heavy, Medium and Light duty Winch Vehicles (Tow Trucks), Air Cushioned Recovery Equipment, Crane, Rock Crushing Equipment Operating front end loaders, excavators, backhoes, telescoping forklifts. Dewatering fresh and brine water, also hybrid fluid.
  • Single and dual centrifuge barite recovery
  • Burn multiple retorts per shift. Keep detailed records of retort result.
  • Complete daily solids control reports for clients and email to instructed people by requested times.
  • Operate various centrifuge types.
  • Fixed and variable back drives. HH5500, United, 20 and 40 Lynx, Tomeos TDM50
  • Used vertical dyers, drying shakers, trough and grinder.
  • Perform scheduled maintenance. Troubleshoot mechanical and electrical issues. Repair as needed.

Computer Skills/Soft Skills:

  • Microsoft Windows, Office, Word, Excel, Internet Explorer, MAC OS & programs
  • Ability to Read and Understand Blueprints.
  • Equipment Safety
  • Safe Work Practices
  • OSHA Regulations
  • Active Listening
  • Supervisory Control and Data Acquisition (SCADA)
  • Technical Documentation
  • Testing Procedures
  • Production Goals
Experience
Solids Control Technician, 02/2011 - Current
Clean Harbors Carmichael, CA,

Repair, maintain, set up and rig down solids control equipment

Service and maintain solids control equipment on a weekly basis

Ensure equipment runs efficiently and as well as troubleshoot issues that arise

Troubleshoot and repair minor electrical issues

Complete all required paper work daily (safety documents, work orders, service records and daily reports)

Repair, maintain, set up and rig down generators and tank farm systems as required

  • Operated pumps to circulate water, oil or other fluids through wells to remove sand or materials obstructing free flow of oil.
  • Organized continued operations for rig by creating and overseeing daily preventive maintenance program.
  • Maintained and performed safety inspections on equipment and tools.\
  • Reduce LGS by 2%
Solid Controls Technician, 09/2022 - 02/2023
Steel Dynamics, Inc. Kernersville, NC,
  • Skilled in troubleshooting control system malfunctions and creating plans for repair.
  • Demonstrated boundless knowledge of digital control concepts
  • Verified site locations followed safety policies and minimized risk of worker injury.
  • Monitored installation and operations to consistently meet rigorous requirements.
  • Reduce LGS by 2%
Supervisor, 06/2020 - 12/2021
Clean Harbors Charlestown, MA,
  • Applied strong leadership talents and problem-solving skills to maintain team efficiency and organize workflows.
  • Enforced rules and regulations outlined in company manual to set forth expectations comprehensibly and consistently.
  • Monitored production equipment and pipelines to identify and repair any issues or faults.
  • Monitored production levels and adjusted equipment to minimize downtime.
  • Documented workers' hours, wages and other pertinent information.
  • Prepared and submitted reports on job progress and safety conditions to upper management.
  • Provided feedback to workers on job performance and safety procedures.
  • Administered disciplinary actions to workers violating safety regulations and company policies.
  • Sourced suppliers and purchased necessary materials for work.
  • Trained workers in proper methods, equipment operation and safety procedures.
  • Monitored job progress and performance of employees or contractors to complete projects prior to deadlines.
  • Directed projects according to schedule and quality demands.
  • Oversaw daily operations at site, keeping team production moving at optimal pace.
  • Created and implemented plans to maximize efficiency of workers.
  • Increase productivity by 18%
Solids Control Technician, 03/2017 - 06/2020
5 Star Solids Control Services City, STATE,
  • Operated pumps to circulate water, oil or other fluids through wells to remove sand or materials obstructing free flow of oil.
  • Maintained and performed safety inspections on equipment and tools.
  • Implemented troubleshooting techniques to alleviate service rig operating issues and maintain optimal performance.
  • Interpreted instrument readings to determine depth of obstruction.
  • Installed pressure-control devices onto wellheads.
  • Lifted, installed and removed equipment in extreme weather conditions and temperatures.
  • Monitored controls and interpreted instrument readings to locate faults or obstacles.
  • Reduce LGS by 2%
Education
Certificate: Information Technology, Expected in 12/2021
-
Louisiana State University At Eunice - Eunice, LA
GPA:
Status -

By clicking Customize This Resume, you agree to our Terms of Use and Privacy Policy

Your data is safe with us

Any information uploaded, such as a resume, or input by the user is owned solely by the user, not LiveCareer. For further information, please visit our Terms of Use.

Resume Overview

School Attended

  • Louisiana State University At Eunice

Job Titles Held:

  • Solids Control Technician
  • Solid Controls Technician
  • Supervisor
  • Solids Control Technician

Degrees

  • Certificate

By clicking Customize This Resume, you agree to our Terms of Use and Privacy Policy

*As seen in:As seen in: