LiveCareer-Resume

safety technician resume example with 5+ years of experience

Jessica Claire
  • , , 609 Johnson Ave., 49204, Tulsa, OK 100 Montgomery St. 10th Floor
  • Home: (555) 432-1000
  • Cell:
  • resumesample@example.com
  • :
Summary

Committed job seeker with a history of meeting company needs with consistent and organized practices. Skilled in working under pressure and adapting to new situations and challenges to best enhance the organizational brand. Seeking entry-level opportunities to expand skills while facilitating company growth.

Skills
  • Maintains updated knowledge and strong technical expertise of Safety, HACCP and ISO standards, regulations, and practices.
  • Flexible and controlled under crisis situations.
  • Reliable - good attendance is essential.
  • Flexibility in terms of working hours (ie early morning, day, evening)
  • Highly organized with excellent time management/priority setting skills, and solutions-oriented.
  • Experience in an inclusive diverse work environment.
  • Working proficiency with MS Office applications, including Outlook, Word and Excel, and internet applications.
  • Experience of developing and/or implementing Health and Safety Management Systems / documented.
  • Perform job site safety compliance inspections including hazard analysis, safe work procedures, written reports and recommendations.
  • Strong verbal and written communication skills.
Experience
Safety Technician, 11/2022 to 02/2023
Capstone LogisticsBrighton, MI,
  • Inspected job sites for hazardous conditions, excessive noise and PPE use.
  • Audited facility-wide safety procedures, risk assessments, inspections and meetings to verify compliance with policies and identify potential threats.
  • Sustained safety protocols, ensuring proper, cost-effective and safe handling of equipment and materials.
  • Inspected and tested fire alarms, carbon monoxide detectors, emergency generators and other safety and emergency systems for full functionality.
  • Analyzed job and worksites and reported on hazards, recommendations and successful corrections.
  • Oversaw implementation of new safety methods and processes, providing employees with seminars and hands-on instruction on safe work techniques
  • Provided daily updates to project managers, foremen and contractors on safety behaviors and operational enhancements.
  • Assisted companies with rectifying safety and hazard issues.
  • Worked effectively with multiple contractors at site providing safety training for employees.
  • Define a hazard as the potential for something to cause harm or create any adverse health effect on people within the workplace.
  • Evaluate the risk and decide on what precautions we need to take.
  • Communicate consistently about safety with employees.
  • Worked with site foremen to create safer working environments.
  • Conduct daily walk through of unit and work area to make sure that all employees are following all OSHA and company policies and procedures.
  • Am also a first responder in case of emergency (Certificate CPR)
  • Coordinated off-site medical care and drug and alcohol testing for employees.
Safety Technician, 06/2022 to 10/2022
Capstone LogisticsConcord, NC,
  • Inspected job sites for hazardous conditions, excessive noise and PPE use.
  • Audited facility-wide safety procedures, risk assessments, inspections and meetings to verify compliance with policies and identify potential threats.
  • Sustained safety protocols, ensuring proper, cost-effective and safe handling of equipment and materials.
  • Inspected and tested fire alarms, carbon monoxide detectors, emergency generators and other safety and emergency systems for full functionality.
  • Analyzed job and worksites and reported on hazards, recommendations and successful corrections.
  • Oversaw implementation of new safety methods and processes, providing employees with seminars and hands-on instruction on safe work techniques
  • Provided daily updates to project managers, foremen and contractors on safety behaviors and operational enhancements.
  • Assisted companies with rectifying safety and hazard issues.
  • Worked effectively with multiple contractors at site providing safety training for employees.
  • Define a hazard as the potential for something to cause harm or create any adverse health effect on people within the workplace.
  • Evaluate the risk and decide on what precautions we need to take.
  • Communicate consistently about safety with employees.
  • Worked with site foremen to create safer working environments.
  • Conduct daily walk through of unit and work area to make sure that all employees are following all OSHA and company policies and procedures.
  • Am also a first responder in case of emergency (Certificate CPR)
  • Coordinated off-site medical care and drug and alcohol testing for employees.
Pipe-fitter /Fire Sprinkler Fitter /Safety Advisor, 02/2021 to 09/2021
Department Of DefenseFort Sill, OK,
  • Work all Underground Pipe
  • Perform all large bore chrome pipe/standard pipe
  • Prepare hydro testing
  • Assist Journeyman to install valves and pipe
  • Expedite/Distribute materials
  • Clean, grind and fit pipes
  • Read and interpreted specifications, diagrams and blueprints for job.
  • Handled all responsibilities for piping systems, including fabricating, assembling, installing and maintaining.
  • Measured and marked pipes for cutting and threading.
  • Threaded pipes using specified machinery.
  • Threaded and installed pipe using pipe wrench and dies.
  • Fabricated and positioned screw pipe, socket weld pipe and stainless steel tubing.
  • Used valve keys and wrenches to turn valves and shut off water from pipe sections.
  • Performed hydrostatic pressure testing of boilers and pressure vessels.
  • Identifying signs of potential problems with boilers and pressure vessels, such as tube leakage, scaling, pitting, metals discoloration and refractory failures.
  • Filled piping systems with water and air to test for leaks.
  • Inspected installations to repair leaks and make adjustments to pipes.
  • Cut openings in walls and floors to accommodate pipe and pipe fittings.
  • Inspected worksites to determine presence of obstructions, unsafe conditions and crew errors.
  • Evaluated written JSAs and job permits to check compliance.
  • Conducted regular inspections of facilities to check compliance with fire, hazard and safety guidelines.
  • Maintained adequate supply of approved safety and PPE supplies for work force.
  • Managed safety and health programs, enforcing compliance with occupational health and safety regulations.
  • Supervised safe handling, storage and disposal of hazardous materials.
  • Cut diverse pipe sizes and lengths to prepare for installation.
  • Verified and gathered measurements to determine proper piping sizes.
  • Inspected and tested installed systems to isolate and identify faults.
  • Shut off steam or other gases or liquids from pipes to conduct maintenance.
Pipe Fitter - Safety Advisor, 12/2019 to 05/2020
S&B Engineering - Client: Phillips 66City, STATE,
  • Work all underground pipe.
  • Perform all large bore chrome/standard pipe.
  • Perform hydro testing.
  • Assist Journeyman to install valves and pipe support.
  • Expedite/Distribute materials.
  • Clean, grind and fit pipes.
  • Read and interpreted specifications, diagrams and blueprints for job.
  • Handled all responsibilities for piping systems, including fabricating, assembling, installing and maintaining.
  • Measured and marked pipes for cutting and threading.
  • Threaded pipes using specified machinery.
  • Threaded and installed pipe using pipe wrench and dies.
  • Fabricated and positioned screw pipe, socket weld pipe and stainless steel tubing.
  • Used valve keys and wrenches to turn valves and shut off water from pipe sections.
  • Performed hydrostatic pressure testing of boilers and pressure vessels.
  • Identifying signs of potential problems with boilers and pressure vessels, such as tube leakage, scaling, pitting, metals discoloration and refractory failures.
  • Filled piping systems with water and air to test for leaks.
  • Inspected installations to repair leaks and make adjustments to pipes.
  • Cut openings in walls and floors to accommodate pipe and pipe fittings.
  • Inspected worksites to determine presence of obstructions, unsafe conditions and crew errors.
  • Evaluated written JSAs and job permits to check compliance.
  • Conducted regular inspections of facilities to check compliance with fire, hazard and safety guidelines.
  • Maintained adequate supply of approved safety and PPE supplies for work force.
  • Managed safety and health programs, enforcing compliance with occupational health and safety regulations.
  • Supervised safe handling, storage and disposal of hazardous materials.
  • Cut diverse pipe sizes and lengths to prepare for installation.
  • Verified and gathered measurements to determine proper piping sizes.
  • Inspected and tested installed systems to isolate and identify faults.
  • Shut off steam or other gases or liquids from pipes to conduct maintenance.
Pipe Fitter - Safety Advisor, 04/2019 to 10/2019
S&B Engineering, FFCU - Client: Phillips 66City, STATE,
  • Work all underground pipe.
  • Perform all large bore chrome/standard pipe.
  • Perform hydro testing.
  • Assist Journeyman to install valves and pipe support.
  • Expedite/Distribute materials.
  • Clean, grind and fit pipes.
  • Read and interpreted specifications, diagrams and blueprints for job.
  • Handled all responsibilities for piping systems, including fabricating, assembling, installing and maintaining.
  • Measured and marked pipes for cutting and threading.
  • Threaded pipes using specified machinery.
  • Threaded and installed pipe using pipe wrench and dies.
  • Fabricated and positioned screw pipe, socket weld pipe and stainless steel tubing.
  • Used valve keys and wrenches to turn valves and shut off water from pipe sections.
  • Performed hydrostatic pressure testing of boilers and pressure vessels.
  • Identifying signs of potential problems with boilers and pressure vessels, such as tube leakage, scaling, pitting, metals discoloration and refractory failures.
  • Filled piping systems with water and air to test for leaks.
  • Inspected installations to repair leaks and make adjustments to pipes.
  • Cut openings in walls and floors to accommodate pipe and pipe fittings.
  • Inspected worksites to determine presence of obstructions, unsafe conditions and crew errors.
  • Evaluated written JSAs and job permits to check compliance.
  • Conducted regular inspections of facilities to check compliance with fire, hazard and safety guidelines.
  • Maintained adequate supply of approved safety and PPE supplies for work force.
  • Managed safety and health programs, enforcing compliance with occupational health and safety regulations.
  • Supervised safe handling, storage and disposal of hazardous materials.
  • Cut diverse pipe sizes and lengths to prepare for installation.
  • Verified and gathered measurements to determine proper piping sizes.
  • Inspected and tested installed systems to isolate and identify faults.
  • Shut off steam or other gases or liquids from pipes to conduct maintenance.
Pipe Fitter - Safety Advisor, 09/2018 to 04/2019
Jacobs - Client: INEOSCity, STATE,
  • Work all underground pipe.
  • Perform all large bore chrome/standard pipe.
  • Perform hydro testing.
  • Assist Journeyman to install valves and pipe support.
  • Expedite/Distribute materials.
  • Clean, grind and fit pipes.
  • Read and interpreted specifications, diagrams and blueprints for job.
  • Handled all responsibilities for piping systems, including fabricating, assembling, installing and maintaining.
  • Measured and marked pipes for cutting and threading.
  • Threaded pipes using specified machinery.
  • Threaded and installed pipe using pipe wrench and dies.
  • Fabricated and positioned screw pipe, socket weld pipe and stainless steel tubing.
  • Used valve keys and wrenches to turn valves and shut off water from pipe sections.
  • Performed hydrostatic pressure testing of boilers and pressure vessels.
  • Identifying signs of potential problems with boilers and pressure vessels, such as tube leakage, scaling, pitting, metals discoloration and refractory failures.
  • Filled piping systems with water and air to test for leaks.
  • Inspected installations to repair leaks and make adjustments to pipes.
  • Cut openings in walls and floors to accommodate pipe and pipe fittings.
  • Inspected worksites to determine presence of obstructions, unsafe conditions and crew errors.
  • Evaluated written JSAs and job permits to check compliance.
  • Conducted regular inspections of facilities to check compliance with fire, hazard and safety guidelines.
  • Maintained adequate supply of approved safety and PPE supplies for work force.
  • Managed safety and health programs, enforcing compliance with occupational health and safety regulations.
  • Supervised safe handling, storage and disposal of hazardous materials.
  • Cut diverse pipe sizes and lengths to prepare for installation.
  • Verified and gathered measurements to determine proper piping sizes.
  • Inspected and tested installed systems to isolate and identify faults.
  • Shut off steam or other gases or liquids from pipes to conduct maintenance.
Pipe-fitter Top Helper, 03/2018 to 08/2018
Fluor Daniels Corporation - Client: ChevronCity, STATE,
  • Kept work areas clean, neat and free of hazards.
  • Organized and cleaned work area and tools.
  • Operated equipment with strong focus on safety and ground communication.
  • Fire watch
  • Hole watch
  • Confined space watch
  • Grinding pipe
  • Helping the fitter
  • Flagger
  • Spotter
  • Used and maintained fusion equipment and pipefitting hand tools.
  • Threaded pipes using specified machinery.
  • Bent, fitted and brazed pipes according to specifications.
  • Cut diverse pipe sizes and lengths to prepare for installation.
  • Clean pipe
  • Handel material
  • Learn how to read ISOS
Pipefitter Helper, 08/2014 to 10/2016
Fluor Daniels Corporation - Client: ChevronCity, STATE,
  • Kept work areas clean, neat and free of hazards.
  • Organized and cleaned work area and tools.
  • Operated equipment with strong focus on safety and ground communication.
  • Fire watch
  • Hole watch
  • Confined space watch
  • Grinding pipe
  • Helping the fitter
  • Flagger
  • Spotter
  • Used and maintained fusion equipment and pipefitting hand tools.
  • Threaded pipes using specified machinery.
  • Bent, fitted and brazed pipes according to specifications.
  • Cut diverse pipe sizes and lengths to prepare for installation.
  • Clean pipe
  • Handel material
  • Learn how to read the ISOS
Education and Training
Medical Office Specialist: , Expected in 02/2009 to San Antonio College - San Antonio, TX
GPA:
High School Diploma: , Expected in 09/2006 to La Joya High School - La Joya, TX
GPA:
Certifications

TWIC Construction Site Safety Technician Construction Site Safety Supervisor Field Safety (7 years of experience) Safety Technology (certified on 2022) OSHA 10 OSHA 30 CPR First AID/AED

,

By clicking Customize This Resume, you agree to our Terms of Use and Privacy Policy

Your data is safe with us

Any information uploaded, such as a resume, or input by the user is owned solely by the user, not LiveCareer. For further information, please visit our Terms of Use.

Resume Overview

School Attended

  • San Antonio College
  • La Joya High School

Job Titles Held:

  • Safety Technician
  • Safety Technician
  • Pipe-fitter /Fire Sprinkler Fitter /Safety Advisor
  • Pipe Fitter - Safety Advisor
  • Pipe Fitter - Safety Advisor
  • Pipe Fitter - Safety Advisor
  • Pipe-fitter Top Helper
  • Pipefitter Helper

Degrees

  • Medical Office Specialist
  • High School Diploma

By clicking Customize This Resume, you agree to our Terms of Use and Privacy Policy

*As seen in:As seen in: