Dedicated to performing accurate, efficient and quality work according to strict timetables. Effective at operating with minimal oversight while supporting all team needs. Top-notch organizational, planning and problem-solving skills with a superior work ethic.
Skills
Counterweights expertise
Basic mathematical abilities
Climbing skills
Piping knowledge
Winching familiarity
Motorized systems experience
Testing procedures
Light carpentry
General plumbing
Building maintenance
Smoke detector testing
Repair work
OSHA
Job bidding
Safety procedures
Heavy lifting
Plumbing and electrical work
Planning and design
Renovations, building and demolition
Construction equipment
OSHA safety requirements
Building codes and regulations
Interpreting blueprints
Experience
Rigger, 01/2020 - 09/2020 Nassco – San Diego, CA,
Reviewed job specifications and site conditions to determine appropriate rigging configurations.
Transported materials, tools and machines to installation sites.
Coordinated structural and heavy lifts weighing up to 12,500 pounds with lull equipment.
Set up metal pipes and support cables in effective arrangements for required loads.
Maintained open communication with crane and other equipment operators to smoothly and efficiently transport loads.
Sorted and erected steel, bolt-up and torque connections.
Safely and efficiently rigged steel members for connectors and pre-assembled bent sections.
Installed and utilized correct safety equipment at all times.
Worked closely with team members to deliver project requirements, develop solutions and meet deadlines.
Maintained updated safety/equipment knowledge through training and classes.
Demonstrated self-reliance by meeting and exceeding workflow needs.
Inspected grooves, angles and gap allowances with micrometer, caliper and precision measuring instruments.
Adjusted weld machines to correct settings prior to weld applications for precision and waste reduction.
Dismantled and assembled wellhead equipment.
Completed minor torch ups with MIG welders.
Set up equipment and welded parts according to welding chart specifications and type.
Followed all safety guidelines, including proper machine guarding and lockout and tagout procedures.
Cleaned and degreased weld joints and workpieces efficiently.
Installed fabricated metal components in processing plant by Unilin.
Laid out, positioned, aligned and secured parts and assemblies with straightedges and combination square sand calipers.
Sustained safety protocols and promoted proper, cost-effective and accurate handling of equipment and materials.
Adjusted functional parts of equipment and control instruments.
Adjusted gas flow and pressure to create and maintain desired flames.
Improved project completion time by multi-tasking on heavy equipment such as forklifts.
Maximized shop organization and equipment lifespan by maintaining equipment.
Heated, formed and dressed metal parts with hand tools, torch and arc welding equipment.
Inspected chains, hammers and other tools for damage or wear to prevent injuries and accidents.
Conducted precision cutting with power saws, hand shears and chipping knives.
Created safety guards, angle iron and square tubing.
Positioned and clamped workpieces together and properly assembled in jigs and fixtures.
Laid out, fitted and fabricated metal components.
Prepared broken parts for welding by properly grooving and scarfing surfaces.
Operated manual and semi-automatic welding equipment to fuse metal segments together.
Repaired and maintained heavy-duty and construction machinery.
Steered forklifts, hand trucks, scissor lifts and other equipment to move materials around work sites.
Followed signals from ground crew and other operators to safely move materials and prevent dangerous interactions or missed cues.
Maintained machinery by repairing and replacing broken and malfunctioning components.
Checked equipment for defects before and after shift and submitted report indicating equipment condition.
Performed grading of site land and smoothed surfaces as part of projects or finish work.
Removed tools and machinery from job site and secured location at end of shift.
Kept equipment fueled and ready for immediate use to support scheduling demands.
Reviewed and carefully followed all safety policies and procedures.
Put up and attached structural components, poured concrete and completed other construction-related tasks.
Learned about new equipment and related attachments while maintaining knowledge of items used daily to meet job requirements.
Worked from layout and work order, created programs and set up machines to produce required parts.
Fabricated various parts using multiple machines at once.
Loaded and unloaded different tool parts from trucks and storage areas.
Loaded and unloaded machines to prevent expensive equipment issues.
Set-up and operated lathes, mills and grinders to cut raw materials.
Changed out aging tools, fixtures and offsets.
Observed company's strict safety rules during each shift to avoid job-related injuries.
Assessed system operations to identify potential areas requiring maintenance services.
Performed tasks to maintain on-site physical security, safety and efficiency.
Repaired equipment and machinery, performing maintenance according to updated industry standards.
Followed instructions regarding duties and assignments for facility and machinery maintenance.
Maintained compliance with internal and regulatory safety standards, including OSHA.
Coordinated product, tool and equipment inventories and maintained tracking records.
Maintained clear and safe workspace area to meet OSHA standards.
Used rulers and micrometers to inspect parts to determine changes in dimension requirements.
Consulted blueprints and repair manuals to complete high-quality repairs and restore optimal functionality.
Replaced wall sockets, ran lines and completed basic carpentry to finish installations.
Diagnosed equipment malfunctions and completed repairs to restore equipment and maintain uptime.
Inspected and maintained facilities to maximize cleanliness and support upkeep targets.
Followed correct procedures for handling, transporting and disposing of new and recycled materials.
Followed correct procedures for handling, transporting and disposing of new and recycled materials.
Designed, fabricated and installed upgrades to improve existing equipment.
Foundation Specialist, 05/2019 - 12/2019 Black Hawk College – Galva, IL,
Calculated concrete quantities needed for jobs.
Positioned wire mesh and rebar to reinforce concrete.
Poured concrete into forms using pump hose and leveled.
Loaded and unloaded necessary tools, materials and machines from trucks and trailers.
Removed debris and waste to clean site after completing work.
Inspected and maintained tools and equipment.
Constructed forms to create various concrete structures.
Finished surfaces by troweling, floating and brushing following project requirements and specifications.
Worked with teammates to move steel forms.
Prepared concrete by hand mixing sand and cement.
Compacted grade using jumping jack or plate compactor equipment.
Reviewed blueprints and other drawings to identify correct grades.
Adapted concrete mixing techniques in terms of client wishes and atmosphere.
Operated equipment and vehicles, including excavators and loaders to prepare site.
Placed steel pins using sledgehammer.
Set up scaffolding, braces and other temporary structures to support crew during work.
Read site layouts and developed plans for concrete pouring and mixing.
Resolved labor, design and tool issues during all phases of construction projects.
Hired and managed subcontractors for electrical and plumbing installations.
Logged inventory of materials used to maintain workplace access to supplies.
Visited job sites and reviewed renovation plans to ascertain aspects of projects.
Renovated and produced physical structures to meet timeline and budgetary constraints.
Reviewed engineering documentation to determine construction operations order.
Eliminated project lags by organizing works-in-progress and delegating tasks.
Established scopes of work, budgets and construction timelines to manage effective project planning.
Saved money by minimizing waste and overseeing cost-effective supplier purchases.
Maintained site safety and aligned work with budget, schedule and applicable building codes.
Initiated process improvements, spearheading strategies to boost revenue by acquiring new residential customers, commercial clients and construction partners.
Applied changes requested by designers, owners or inspectors to optimize work.
Evaluated architectural plans and consulted with clients to gain deep understanding of project scope and objectives.
Estimated materials and labor requirements to complete jobs within budgetary and timeline requirements.
Assigned work to employees based on project requirements and individual team member strengths.
Determined optimal construction requirements and site plans.
Collaborated with owners during building process to maintain unique vision.
Led worksite preparation and project planning for smoothly run jobs.
Supervised material usage and contractor hours to keep projects in line with budgets.
Maintained high standards of safety, productivity and quality for every job.
Complied with federal and company regulations to maintain high level of safety at all job sites.
Adhered to codes when performing plumbing and electrical work.
Painted interior and exterior walls, selecting appropriate paints for varying conditions.
Remodeled and upgraded bathrooms, kitchens, basements and living areas.
Installed various types of flooring, including hardwood, laminate, tile and carpet.
Hung, repaired, patched, caulked and painted drywall.
Communicated with clients throughout project to deliver exceptional customer service.
Refreshed kitchens, including cabinetry, countertops and appliances.
Placed bids on work and provided project plans and estimates to customers.
Directed all stages of project management for multiple types of home repair, maintenance and remodeling.
Maintained baseline safety knowledge to identify areas requiring improvement to meet code.
Trained in plumbing, carpentry, painting, plastering, machine servicing and installation.
Read and understood specifications, drawings and blueprints to complete accurate, high-quality work.
Collected and removed debris from work sites to maintain team productivity and minimize safety hazards.
Maintained clean, safe working environment by removing waste from job site prior to shift completion.
Mixed, poured and spread concrete, asphalt and other materials with high accuracy to meet project requirements.
Built and disassembled scaffolds, bracing and barricades to assist in vertical construction activities.
Leveled earth around completed work to provide proper drainage, protect underground piping and ready ground for planned landscaping.
Dug ditches and trenches at target locations and backfilled excavations.
Used established signals to help equipment operators align, move and adjust machinery.
Operated overhead lifts to move heavy and bulky work materials.
Used organizational skills to meet productivity requirements.
Constructed and removed support structures such as scaffolding, ramps and braces.
Education and Training
High School Diploma: , Expected in 06/2014 - Central Cabarrus High School - Concord, NC GPA:
Resumes, and other information uploaded or provided by the user, are considered User Content governed by our Terms & Conditions. As such, it is not owned by us, and it is the user who retains ownership over such content.
How this resume score could be improved?
Many factors go into creating a strong resume. Here are a few tweaks that could improve the score of this resume:
