Qa Qc Mechanical Engineer Resume Example

Love this resume?

By clicking Build Your Own Now, you agree to our Terms of Use and Privacy Policy

Jessica Claire
  • Montgomery Street, San Francisco, CA 94105
  • Home: (555) 432-1000
  • Cell:
Professional Summary
Results-oriented and highly motivated Mechanical Engineer with more than 25 years experience in Quality Assurance/Quality Control inspections on Building, Power and Oil & Gas  construction projects. Primary inspection responsibilities are monitoring, supervising and appraising the Contractor's/Sub-contractor's fabrication, construction, maintenance and repair performances in the area of quality control including evaluation of materials and procedures in accordance to applicable project specifications. Such inspection responsibilities includes monitoring and checking the quality works in the areas of mechanical, structural, piping, welding, pressure vessels, pipelines, tanks, protective coatings and linings, painting, corrosion control, insulation, non-destructive testing, civil and electrical. Prepare inspection reports and issue non conformance reports as required. Other responsibilities are support to commissioning of plant and equipment utilities, preventive maintenance, condition monitoring, failure analysis, and handover of documents; assist in the implementation of safety and environmental protection programs; and provides data required on project progress.
  • Good communication skills
  • Fast learner
  • Basic computer skills
  • Project management skills
  • Strong initiative
  • Strong team player
  • Supervisory experience
  • Familiarity with weld inspection process
  • General math skills
  • Knowledgeable in construction safety
  • Strong interpersonal skills
  • Works well in diverse team environment
  • Multidisciplinary exposure
  • Interpersonal skills
  • Proficiency at reading blueprints
  • Engineering drawings/standards
  • Good judgment
Work History
QA/QC Mechanical Engineer, 06/2012 to 05/2013
Dak AmericasCharlotte, NC,
  • in 1200 MW Combined Cycle Power Plant in Shariket Kahraba Koudiet Eddraouch,  El Taref, Algeria.
  • Primary responsibilities are on inspection of mechanical items such as piping, tanks, pumps, motors, etc. from material evaluation, fabrication and assembly phases, and during installation on site, including issues on corrosion.
  • Secondary responsibilities are support for the inspection of civil and electrical works such as witnessing of soil compaction test, concrete pouring on slabs, columns, etc. and check cube samples
  • Check subcontractors' activities including verification of personnel qualification, plans, method statements or procedures if according to project codes and specifications, equipment and tool calibrations, and safe working conditions.
  • Prepare inspection reports, issue non conformance and analyze the root causes, and evaluate the proposed solutions.
  • Provided outstanding customer service.
  • Followed company procedures to maintain work environment in a neat and orderly condition.
  • Collaborated with Engineering, Construction and Commissioning Departments to ensure smooth work flow and efficient organization operations.
  • Assists on the submission of project dossiers.
QA/QC Mechanical Engineer, 06/2007 to 10/2011
General ElectricHuntsville, AL,
  • in 2000 MW Combined Cycle Mesaieed A Independent Power Plant Project in Mesaieed, Qatar.
  • Started as company representative in the fabrications of steel structures in Hidada fabrication shop in Jeddah, Saudi Arabia, and in Shaw-Nass piping spool fabrication shop in Bahrain.
  • Evaluate personnel qualifications and procedures in accordance with project specifications.
  • Checked welding, non destructive tests, hydrotests, paintings, etc.
  • Reviewed and approved contractor inspection reports, audits and other pertinent reports such as as built drawings, etc.
  • Prepared regular interval progress reports in coordination with Engineering and Construction departments.
  • Monitors and supervises the dispatch of fabricated items to Qatar.
  • Attended all critical pre-installation conferences with general contractors, subcontractors, consultants and manufacturer’s representatives.
  • Supervised 12 mechanical subcontractors on project site from erection of fabricated structures and pipe spools in turbine buildings, black start, cooling towers, water and waste water treatment plants, etc. including checking of welding, non destructive tests, painting, hydrotests, etc.
  • Supported the civil and electrical inspection team on their load of activities such as soil compaction tests, concrete cube sample compression tests, electrical grounding tests, electric light intensity tests, etc.
  • Conducted weekly contractor/subcontractor meetings, which facilitated stronger communication and the ability to resolve critical issues.
  • Issues non conformance reports, analyze root cause and evaluate proposal for closures.
  • Liaises with Client's Representative on inspection activities including clearing of punch list items.
  • Assists on the submission of project dossiers.
Piping QC Inspector, 05/2004 to 06/2007
Dak AmericasMoncks Corner, SC,
  • Worked as Piping QC Inspector in Ras Laffan Onshore Expansion Project's Acid Gas Injection, Train 4 and Train 5 Processes including Utilities, Al Khaleej Gas Process, and Mesaieed Compressor, Pipeline and Metering; and LPG Butane and Propane Tanks; and LNG Tank No. 6.
  • Supervised subcontractor's welding work by monitoring welder performance, welding process, material, handling and inspection results.
  • Monitored proper assignment of qualified welding procedures and welders.
  • Conducted material traceability and on transferring on cut piping materials.
  • Assisted the Welding Engineer for supervision of subcontractors Welding Inspectors' work relating non destructive tests, post weld heat treatments and positive material identification.
  • Witnessed MT and PT inspection on shop and field weld joints.
  • Witnessed of Pneumatic and Hydro tests.
  • Liaised with Client's Representative on periodic testing and inspection activities.
QAQC Supervisor, 02/1998 to 05/2001
Chiyoda Singapore PTE Ltd (Phils)City, STATE,
  • Worked as QA/QC Supervisor in Petron's modification and alteration of Lube Oil Batching Plant project in Pandacan, Manila, Phils.
  • Responsible for coordination and supervision of all inspection activities such as NDT, visual, dimensional, material, welding and painting inspections carried out in accordance with inspection plans with relative standard level of control in order to assure that contractual requirements are met.
  • Assures quality surveillance of construction activities ensuring that established fabrication and installation methods are applied in the execution of the work.
  • Conducts internal quality audits, identify non-conformances and prepare and review corrective actions.
  • Liaises with Client's Representative about periodic activities and inspection schedules.
  • Also, assures filing of quality documentation and collate final dossiers.
Welding Inspector, 09/1996 to 02/1997
QED SingaporeCity, STATE,
  • Worked as Welding Inspector seconded to Hyundai on ONGC offshore pipeline and jacket installation projects in Bombay High, India.
  • Responsible for weld quality inspection, NDT coordination and generate reports.
  • Liaises with Client's Representative on inspection activities.
QC Inspector, 1990 to 06/1996
Societe Generale De SurveillanceCity, STATE,
  • 4/1995 - 7/1996 Seconded to McDermott-ETPM East Inc. as QC Inspector for the fabrication of QGPC BH/MM Dev. Project Platforms; Oxy-Qatar Shuiaba Water Flood Pilot Project PS-IL Platform; Qatargas Upstream Dev. Project LQ Building, Bridges 1 and 2, and Jackets; and Enron Tapti and Panna Field Platforms; Saudi Aramco – Universal Modular Platforms in Jebel Ali yard. Responsible for structural and piping weld quality inspection, witnessing of hydrotests and stress relieving works; generate reports and punchlist.   
  • 11/1994 – 3/1995 Seconded to Maritime Industrial Services as QC Inspector in the installation of Fauji Oil Terminal 36” Diameter Crude Oil Trestle Bridge Pipe Line Project in Karachi, Pakistan. Responsible for total quality inspection to include material inspection; painting inspection; structural and piping weld inspection; non-destructive testing coordination; radiographic film interpretation; assists in pre-commissioning works; generate reports; documentation; and punchlist. 
  • 3/1994 – 10/1994 Seconded to McDermott-ETPM East Inc. as QC Inspector in the fabrication of Elf N’kossa and Qatargas Upstream Dev. Project jackets. Responsible for structural weld quality inspection and generate reports.   
  • 3/1993 – 2/1994 Seconded to McDermott-ETPM East Inc. as QC Inspector in the fabrication and installation of ONGC I-PQSU Project jackets, platforms and risers in Bombay High and Neelam Oilfields in India onboard DLB-801 Barge. Responsible for weld quality inspection and generate reports.   
  • 10/1992 – 2/1993 Seconded to McDermott-ETPM East Inc. as QC Inspector in the hook-up works onboard M/V True Grit on various platforms in Safaniya, Marjan, Berri and Zuluf oilfields of Saudi Aramco in Saudi Arabia. Responsible for weld quality inspection, NDT coordination, witnessing of hydrotests and stress relieving, and generate reports.   
  • 9/1992 – 10/1992 Seconded to Paladon Engineering Ltd. As Client’s Inspector in McDermott yard at Ras Alkhaimah, UAE, in the fabrication of 17 units of stage/test separators for ADCO Bab Oil Dev. Project. Responsible for monitoring; and verification of work, material and weld quality. Also generate reports and punchlist.   
  • 4/1992 – 8/1992 Seconded to McDermott Int’l. as QC Inspector in the hook-up works in IOOC Salman Oilfield Project in Iran. Responsible for weld quality inspection, witnessing of hydrotests, generate reports and punchlists.   
  • 9/1991 – 3/1992 Seconded to McDermott Int’l. as QC Inspector in the hook-up works for Saudi Aramco Berri Oilfield in Saudi Arabia onboard M/V True Grit. Responsible for weld quality inspection, witnessing of hydrotests and stress relieving, and generate reports.   
  • 8/1991 – 8/1991 Seconded to National Petroleum Construction Co. as QC Inspector in the installation of QGPC Idd Al Shargi jacket and platform in North Dome Oilfield in Qatar; and Saudi Aramco MP-1 and MP-2 temporary production platforms in Zuluf Oilfield in Saudi Arabia onboard HLS 2000 Barge. Responsible for weld quality inspection and generate reports.   
  • 2/1991 – 6/1991 Seconded to McDermott Int’l. as QC Inspector in the fabrication of IOOC Salman Project Q1, Q2 and FP platforms in Jebel Ali yard. Responsible for weld quality inspection and generate reports.   
  • 10/1990 – 2/1991 Seconded to Chevron as Client’s Inspector in the Takula Accommodation Platform Refurbishment Project for Cabinda Gulf Oil Co. (Angola) in Lamprell-Jumeirah yard in Sharjah, UAE. Responsible for the verification and monitoring of works; mechanical, structural and painting inspection; and checks Contractor’s documentation in close coordination with RINA Surveyor.   
  • 3/1990 – 10/1990 Seconded to ETPM as QC Inspector in the fabrication of Numbi and Wamba platforms for Cabinda Gulf Oil Co./Agip/Chevron (Angola) Project in Sharjah Yard, UAE. Responsible for weld quality inspection; witnessing of hydrotest and stress relieving; generate reports and punchlist.   
NDT Inspector, 02/1987 to 09/1989
Al Hoty Stanger Ltd.City, STATE,
  • Worked as Third Party Piping/Structural Inspector in Jeddah Oil Refinery Modification Project; Rabigh Steam Power Plant Extension Project; and Royal Saudi Air Force - Air Field Facilities in Taif, fabrication and installation of 12" thick Hangar Doors, Etc. 
  • Responsible for piping and structural welding inspection, witnessing of welder's qualification tests, Non-destructive Testing and documentation.
QC Inspector, 02/1984 to 02/1987
Philippine National Oil Company Marine Corp.City, STATE,
  • Worked as QC Inspector to several Philippine Navy ships refurbishment works; construction of 4 units of 5000DWT Coal Carriers of PNOC Coal Division; and refurbishment of 3 units of US Navy Pontoon Barges (Bravo, Delta, Foxtrot). 
  • Responsible for structural and piping weld quality inspection; sandblasting and painting inspection; Non-destructive Testing; and generate reports and pre-commissioning documents.
High School Diploma: , Expected in 1976
Batangas State University - Batangas City, Philippines
Bachelor of Science: Mechanical Engineering, Expected in 1983
Batangas State University - Batangas City, Philippines
  • Student government representative

By clicking Build Your Own Now, you agree to our Terms of Use and Privacy Policy

Resumes, and other information uploaded or provided by the user, are considered User Content governed by our Terms & Conditions. As such, it is not owned by us, and it is the user who retains ownership over such content.

How this resume score could be improved?

Many factors go into creating a strong resume. Here are a few tweaks that could improve the score of this resume:


Resume Strength

  • Personalization
  • Target Job

Resume Overview

School Attended
  • Batangas State University
  • Batangas State University
Job Titles Held:
  • QA/QC Mechanical Engineer
  • QA/QC Mechanical Engineer
  • Piping QC Inspector
  • QAQC Supervisor
  • Welding Inspector
  • QC Inspector
  • NDT Inspector
  • QC Inspector
  • High School Diploma
  • Bachelor of Science

Similar Resume

View All
Piping/Mechanical QA/QC Inspector
QA/QC Mechanical