Jessica Claire
Montgomery Street, San Francisco, CA 94105 (555) 432-1000,
Professional Summary

Licensed professional engineer with 6 years of experience in the water/wastewater treatment industry. My work experience includes design of industrial water and wastewater systems. I have worked on design of reverse osmosis (RO), dissolved air flotation (DAF), ceramic microfiltration (CMF) and ultrafiltration (UF) units. Additionally, I have a strong background in the integration of process equipment such as pumps, blowers, valves and piping; hydraulic calculations; structural design; and design of equipment for heat recovery such as shell-and-tube heat exchangers, vent condensers and directcontact water heaters. I have managed multiple projects from start to finish and have been the sole technical body on many jobs up to $500,000 in value. I am passionate in my work and look forward to making my contributions to the industry.

  • Design of heat transfer equipment (shell-and-tube heat exchangers, direct-contact water heaters, steam heaters, vent condensers)
  • RO system design
  • DAF design
  • CMF system design
  • Development of project piping specifications
  • Design of process and power plant piping according to ASME B31.3 & B31.1
  • Design of pump and piping skids
  • Highly proficient in AutoCAD/CADWorx
  • Heat transfer calculations
  • Selection and sizing of pumps, valves and other process equipment
  • Hydraulic calculations for compressible and incompressible fluids
  • Wastewater treatability studies and pilot projects
  • Writing reports on treatability studies and pilots
  • Structural design and analysis
  • Familiar with structural & civil engineering codes (IBC, ASCE 7 and ASCE 360)
  • Proficient with Fathom 7.0 flow analysis software
Work History
03/2018 to 04/2020 Project Engineer Stanley Black & Decker, Inc. | Nashville, TN,

Design of water and wastewater treatment systems:

  • Design of RO units.
  • Membrane projections.
  • DAF design for optimal operation.
  • Carrying out treatability studies and pilot projects.
  • Design of CMF systems including optimizing flux rates, membrane selection and design of pumps & piping.
  • Writing technical reports on equipment performance.

Design of general process equipment:

  • Selection and sizing of blowers, pumps and valves.
  • Structural analysis and design of skids & platforms.
  • Review of fabrication and assembly drawings.
  • Design of process piping per ASME B31.3.
  • System head loss calculations for water, air, steam and natural gas.

Design of heat transfer equipment:

  • Carry out heat transfer calculations.
  • Design of shell-and-tube heat exchangers, vent condensers steam heaters and direct-contact water heaters.
  • Review of fabrication drawings.
11/2014 to 03/2018 Mechanical Engineer Plug Power Inc. | Atlanta, GA,

Managed all aspects of equipment selection and design throughout project. Primary responsibilities include the following:

  • Selection of manual, automatic, flow control and safety valves according to project requirements.
  • Responsible for selecting and purchasing tanks & pressure vessels to meet system design.
  • Preparation of submittal packages for client. Responsible with organizing submittal process to obtain final technical approval from the end user.
  • Main technical point of contact with vendors. Responsible with coordinating purchasing to meet scope and schedule requirements.

Design of piping:

  • Preparation of piping material specifications for projects.
  • Carry out calculations according to ASME B31.1 & B31.3 requirements.
  • Liaison with fabricator to address issues during fabrication.

Design of skid packages for best operational efficiency. This includes the following:

  • Piping and structural 3D modeling using CADWorx.
  • Seismic & wind load analysis of structures according to ASCE 7.
  • Interpretation of project specifications to provide cost-effective solutions.
  • Management and leadership of design subcontractors to develop construction drawings and 3D models.
03/2014 to 11/2014 Designer/Drafter Pelican | Plainfield, IN,
  • Develop technical drawings for civil, process, mechanical and structural disciplines.
  • Design of interconnecting piping using CADWorx Plant.
  • Design of pipe racks, supports and skid frames using structural steel.
  • Equipment layout and design of skid packages.
  • Development of piping isometric drawings for fabrication.
  • Generate cut lists for pipe and structural steel.
  • Compilation of bill of materials (BOM) and material take-off (MTO) lists for hardware and structural steel.
Education & Credentials
Expected in 2013 Bachelor of Science | Mechanical Engineering University of Central Florida, Orlando, FL GPA:
Expected in 01/2020 | Professional Engineer (PE), Florida Board of Professional Engineers (FBPE), GPA:

License No. 88763

Additional Information

References available upon request.

By clicking Customize This Resume, you agree to our Terms of Use and Privacy Policy


Resumes, and other information uploaded or provided by the user, are considered User Content governed by our Terms & Conditions. As such, it is not owned by us, and it is the user who retains ownership over such content.

How this resume score
could be improved?

Many factors go into creating a strong resume. Here are a few tweaks that could improve the score of this resume:


resume Strength

  • Length

Resume Overview

School Attended

  • University of Central Florida
  • Professional Engineer (PE)

Job Titles Held:

  • Project Engineer
  • Mechanical Engineer
  • Designer/Drafter


  • Bachelor of Science

By clicking Customize This Resume, you agree to our Terms of Use and Privacy Policy

*As seen in: