LiveCareer-Resume

mechanical design engineer resume example with 16+ years of experience

Jessica Claire
Montgomery Street, San Francisco, CA 94105 609 Johnson Ave., 49204, Tulsa, OK
Home: (555) 432-1000 - Cell: - resumesample@example.com - -
Summary
Highly analytical, performance-driven engineering professional with 10+ years' experience creating innovative, cost -efficient designs using Pro/Engineer Wildfire/Creo components for Caterpillar Machines and Engines and Komatsu Mining Trucks. Broad knowledge in cast components and sheet metal fabrications, tube and hoses routings for air and fluid. Team spirited with project-management abilities, effective communication and presentation skills.
Skills
  • Creo 2.0 (Creo 3.0), Creo-Simulate (Pro-Mechanica), Pro-Mechanism, Pro-E Wildfire 5.0 Pro/Sheet-Metal, Pro/Assembly, Pro/Piping, AutoCAD, SolidWorks, Pro/ENGINEER Cabling
  • Microsoft Project and MS Office.
  • Research & Design Strengths
  • Design, Analysis
  • Six Sigma (Green Belt)
  • FMEA
  • APQP
  • Manufacturing Requirements / Specifications
  • Functional studies for assemblies and components
  • Creo 2.0 Creo Elements /Pro 5.0 (formerly Pro/Engineer Wildfire 5.0)
  • Pro/ENGINEER Mechanica Simulation Pro/ENGINEER Wildfire 5.0
  • Pro-Cabling using Creo 2.0, Pro/ENGINEER Wildfire 5.0
Accomplishments
Experience
09/2011 to Present
Mechanical Design Engineer , ,
  • Develop design concept drawings and respective supporting engineering drawings plus technical information for current production dump trucks (6 plus models) Interface with other Komatsu Engineering Groups as required for technical information exchange.
  • Assist in providing technical support to 5 other company operation's groups including Manufacturing, Marketing, Sales, Parts, and Service.
  • Utilize CAD programs to develop design concept drawing, complete assembly drawing, complete component drawing, and complete system drawing for respective vehicle chassis, and/or component, and/or system plus BOM and supporting technical information.
  • Development to meet design compliance to Engineering Standards, Product Quality, and Product Cost.
  • Maintain open communications with internal and external customers and suppliers and assist in providing technical support to meet their expectations.
  • i.e.
  • Manufacturing, Parts, Service, Sales, Marketing, customers, vendors, management, and other Engineering groups).
09/2010 to 01/2011
Mechanical Design Engineer Illinois Tool Works , ,
  • Researched and design new parts for Intake components -lower /upper lines (Aftercooler to cylinder head) Apply design tools: ProE, FEA, BJA, GD&T and CFD to obtain new design parts, work with suppliers and internal engineering resources to obtain prototype and new parts.
  • Evaluate and demonstrate manufacturing feasibility and technical justification for the design approach, conduct (FMEA) Failure Mode & Effects Analysis.
  • Maintain documentation of complex design activities and responsible for complete design cycle for concept generation to final checking and releasing of the drawings in Teamcenter.
03/2010 to 09/2010
Mechanical Engineer Illinois Tool Works , ,
  • Responsible role in the new product development of the heat shield design for C280 and 3500 Engine.
  • Design, Modeling and Drafting for the C280/3500 components and supplier collaboration engagements.
  • Teamed with seniors engineers to prototype equipment, conducted project planning for each prototyping, assisted with design documentation utilizing detailed technical drawings and engineering specifications.
  • Responsible for complete design cycle for concept generation to final checking and releasing of the drawings in Teamcenter database.
08/2008 to 03/2010
Project Engineer Asrc Federal Holding Company , ,
  • Participating in Design Reviews of C175 Providing on-site design services for engine modifications for Marine installations of the C175 Diesel Power for propulsion and power generation.
  • Functional studies for assemblies, components related to C175 -Lube /Fuel/ Cooling Systems.
  • FMEA) Failure Mode & Effects Analysis.
  • Design, Modeling and Drafting for the C175 components for external supplier engagements.
  • Responsible for complete design cycle for concept generation to final checking and releasing of the drawings in Teamcenter database.
02/2006 to 08/2008
Project Engineer Huitt-Zollars Oklahoma City, OK,
  • Design & Modification of Fuel Tanks, Base Rails, and Control box using Pro-E Wildfire 2.0, followed by drawing preparation pertaining to CAT standards.
  • Conducted Potential Failure Mode Effects Analysis for the PM1000 switchgear and circuit protection enclosure.
  • Conducted Testing, establishing proper assembly procedures for components & creating required documentation for service and retrofits.
  • Mechanical design for the: PM1000/2000, Xq1000/2000 and XQM/XQA Power Module Experienced in modeling, cast components and sheet metal fabrications.
  • Responsible for the quality of the final product Understanding of product surfacing and packaging clearances.
  • Container / Enclosure Assemblies: Involving Concept Creation, Verification and Conclusion.
  • Installation and packaging of a variety of components and systems, verify the clearances and interactions between components in according to specifications driven by system owners.
10/2003 to 01/2006
Mechanical Design Engineer Huitt-Zollars Rockland, MA,
  • Concept design and modeling using Pro/Engineer 2001 and Wildfire components for Caterpillar Machines and Engines providing support for various large assemblies, valve covers connecting rods, elbows, ducts and routings for air and fluid.
  • Experience in 3D modeling, cast and sheet metal Functional studies for assemblies and components - comparison of solutions and presentation of findings.
Education and Training
Expected in February 2004
Master of Science: Mechanical Engineering
Transilvania University of Brasov - Konstanz,
GPA:
Mechanical Engineering
Expected in June 2003
Bachelor of Science: Mechanical Engineering Automotive Engineering
BSME) - ,
GPA:
Mechanical Engineering Automotive Engineering
Expected in
Romania (www.unitbv.ro/en/Home.aspx) Coursework: Six Sigma, FMEA, NPI & CPI Advanced Manufacturing Engineering, Basic Finite Element Methods, Project Management, Special Characteristics,:
University of Transilvania - ,
GPA:
Activities and Honors
Concept to Prototype
Languages
English: good level (spoken and written) Romanian: good level (spoken and written) German: medium level (spoken) continued...
Skills
3D modeling, approach, AutoCAD, Basic, Cabling, CAD, Concept, CPI, database, documentation, Drafting, ENGINEER, English, Functional, German, drawing, in Design, Marketing, Mechanical design, exchange, MS Office, Microsoft Project, 2000, Modeling, new product development, packaging, power generation, Pro-E, Project Management, project planning, prototyping, Quality, Maintain documentation, Research & Design, Romanian, Sales, Simulation, site design, Six Sigma, SolidWorks, switchgear, technical support, written
Additional Information
  • Innovation and Design *Concept to Prototype

By clicking Customize This Resume, you agree to our Terms of Use and Privacy Policy

Your data is safe with us

Any information uploaded, such as a resume, or input by the user is owned solely by the user, not LiveCareer. For further information, please visit our Terms of Use.

Resume Overview

School Attended

  • Transilvania University of Brasov
  • BSME)
  • University of Transilvania

Job Titles Held:

  • Mechanical Design Engineer
  • Mechanical Design Engineer
  • Mechanical Engineer
  • Project Engineer
  • Project Engineer
  • Mechanical Design Engineer

Degrees

  • Master of Science
  • Bachelor of Science
  • Romania (www.unitbv.ro/en/Home.aspx) Coursework: Six Sigma, FMEA, NPI & CPI Advanced Manufacturing Engineering, Basic Finite Element Methods, Project Management, Special Characteristics,

By clicking Customize This Resume, you agree to our Terms of Use and Privacy Policy

*As seen in:As seen in: