Hardworking Construction/Welder/Pipefitter/Fabricator with over 10 years of successful experience in Hard Labor and High skill Construction jobs. Recognized consistently for performance excellence and contributions to success in Construction and Production industry. Strengths in welding are Stainless steel TIG (GTAW) and STICK welding (SMAW) and WELDING/Fabrication skills backed by Expierience from years of working in Metallurgy and Welding from the jobs and education shown.
|
|
I AM RESPONSIBLE FOR FOLLOWING THE STEPS REQUIRED TO COMPLETE MY TASK OF LOADING THE ROBOT WITH GLASS FOR THE EV AND MAKING SURE ALL STANDARDS ARE MET BEFORE PUTTING THE ROOF/FRONT GLASS IN THE FLIPPER FOR THE DRIVER TO INSTALL ON THE EV. DRIVE THE ROOF/FRONT GLASS ON TO THE EV AND LINE UP PROPERLY AND FINISH STEPS TO COMPLETE INSTALL AND FOLLOW STEPS TO DETACH DRIVER.
KNOWING AND COMPLETING 5S TASKS
SORT, SET IN ORDER, SHINE, STANDARDIZE AND SUSTAIN
I ALSO LOOK FOR SAFETY CONCERNS AND ERGONOMIC IMPROVEMENTS THAT CAN SAVE TIME AND INJURIES FROM HAPPENING. I LOOK TO HELP MY FELLOW ASSOCIATE IF THEY FALL BEHIND BECAUSE OF DEFECTS OR MISTAKES FROM THE ROBOT.
- Fetched materials, equipment and tools for welding professionals.
- Welded in flat, horizontal, vertical and overhead positions.
- Set up and operated shielded metal arc and gas metal arc welding equipment.
- Repaired manufactured products by dismantling, straitening, reshaping and reassembling parts.
- Maintained equipment in good working order.
- Inspected final products to assess compliance with quality standards and established tolerances.
- Reviewed production specifications to verify accurate weights and measurements prior to mixing ingredients.
- Operated equipment such as Grade-all forklift, forklift, scissor lift and boom lift on daily basis to achieve any type of installation, measuring, clean up, building, welding required to complete the job task.
- Minimized warping using good fitting, burning and welding techniques.
- Conducted special welds with extremely low tolerances for industrial operations.
- Clamped, held, tack-welded, heat-bent and bolted component parts to achieve required configurations and positions.
- Chipped off excess weld, slag and spatter using hand tools.
- Used MIG gun arc to melt and deposit metal from electrode to workpieces.
- Fabricated shop parts directly from blueprints.
- Inspected welds and checked critical measurements to meet specifications.
- Certified rigging for loading and unloading equipment such as chillers, tanks, large pipe deliveries, pre-fabricated components for the job that need to be rigged for direct installation.
- Worked for Ryan Mechanical out of local 525 Las Vegas and helped build the RENO/SPARKS giga factory performing stainless and carbon steel welds as well as 4" stainless pro press lines for piping air and coolant to equipment in level 1 building D
- Repaired manufactured products by dismantling, straitening, reshaping and reassembling parts.
- Welded in flat, horizontal, vertical and overhead positions.
- Prepared welding equipment to perform advanced welding work.
- Completed welding projects using gas tungsten arc, gas metal arc, flux-cored arc, plasma arc and shielded metal arc equipment.
- I helped in rig and install equipment such as equipment frames and bagel ovens and artisan pizza ovens and tool boxes for job completion
- Helped build and weld structure supports for Ergonomic platforms for the EOL to help stop and prevent injuries to workers for Tesla EOL in GA3 for model S in 2014 with my SMAW 4G structural AWS certification. Furthermore i assisted and helped move 2 500 LB standing cranes from GA3 EOL to GA3 body in white.
- I welded 1/2-1 1/2 female fittings with TT indication devices into wine tanks for baktek
- I traveled and worked in 11 states (CHI,AZ,NV,IN,NM,NY,LA,WY,CO,CA,OR)
- Set up and operated shielded metal arc and gas metal arc welding equipment.
- Repaired manufactured products by dismantling, straitening, reshaping and reassembling parts.
- Welded in flat, horizontal, vertical and overhead positions.
- Managed repair and maintenance schedule to organize shop and maintain equipment.
- Clamped, held, tack-welded, heat-bent and bolted component parts to achieve required configurations and positions.
- Conducted special welds with extremely low tolerances for industrial operations.
- Fabricated shop parts directly from blueprints.
- Minimized warping using good fitting, burning and welding techniques.
- Removed and repaired unacceptable welds with air arc and grinder to meet quality guidelines.
- Inspected welds and checked critical measurements to meet specifications.
- Replaced leaking pipe connections caused by leaking gaskets from being installed wrong or tightening hardware in wrong pattern and to wrong torque specification.
- Keep and maintain clean work environment
Learned how different metals will react to different types of heat and welding procedures.
Welding exotic metals such as titanium, chrome, chrome-moly tubing, types of aluminum.
Welding in different positions such as 2G, 3G, 4G structural and also 5G and 6G and 6G/R (restrictions test)
Prepping and cutting our own coupons for testing with 2" 160 XX carbon pipe with GTAW root with SS 309 wire and purge for dissimilar metals test
Got all completion certificates and passed all tests for certifications in all classes completed
Advanced pipe welding class
Exotic metals' Sports welding class
Basic pipe welding
Classes in his degree included the following
1.) Blueprint design and reading
2.) Basic Machining (manual and some CNC lathe and milling) Bridgeport and HASS CNC machines
3.) GMAW welding
4.) GTAW welding
5.) SMAW welding
6.) FLUX core welding ( inner shield and dual shield wire and procedure)
7.) Basic sheet metal and bending class
Also the general education classes as all other delta college degrees
Recognition- Placed 3rd in state for the 2011 SKILLS USA welding competition in San Diego for delta college
By clicking Customize This Resume, you agree to our Terms of Use and Privacy Policy
Disclaimer
Resumes, and other information uploaded or provided by the user, are considered User Content governed by our Terms & Conditions. As such, it is not owned by us, and it is the user who retains ownership over such content.
How this resume score
could be improved?
Many factors go into creating a strong resume. Here are a few tweaks that could improve the score of this resume:
resume Strength
- Length
- Personalization
- Target Job
Resume Overview
School Attended
- Lincoln Electric Welding School
- San Joaquin Delta College
Job Titles Held:
- Tesla Production Associate- Roof Glass/Front Glass
- WELDER/PIPEFITTER/PLUMBER
- Millwright/Welder
- Welder/Mechanic
Degrees
- No Degree
- Associate of Science
By clicking Customize This Resume, you agree to our Terms of Use and Privacy Policy
