pump operator resume example

• Moved levers or controls of lifting devices to load, unload or stack material.
• Prepared finished stock for shipment by identifying, pulling and packing product.
• Communicated with team members to coordinate efficient and accurate movements.
• Weighed materials or products to record data on tags or labels.
• Drove gasoline- or electric-powered vehicles to transport materials between loading, processing and storage areas.
• Secured loads on pallets to minimize damage and worker injuries.
• Employed hand signals to communicate effectively with coworkers operating transport vehicles and direct movements from floor.
• Positioned lifting devices around loaded pallets, skids and boxes to secure materials for transport to designated areas.
• Maintained current forklift training and certification as required by company policies.
• Picked up warehouse debris and deposited waste into appropriate piles and stacked baled trash.
• Scheduled or performed needed maintenance on equipment to promote longevity of use.
• Checked shipments for damaged or incorrect items.
• Moved freight, stock and other materials to and from storage and production areas and loading docks.
• Loaded, unloaded, transported and stacked materials through careful operation of various warehouse equipment.
• Packaged, labeled and tagged goods before transfer.
• Reported safety and quality issues to management.
• Followed maps and GPS systems to promptly complete tasks.
• Inspected product load for accuracy to foster timely and complete delivery.
• Squared stacked displayed materials for safe and orderly conditions.
• Noted and recorded receipt of materials on drivers' paperwork.
• Transported material to correct locations and documented inventory changes.
• Tracked materials moved for stocking purposes and to complete logs for management.
• Maneuvered forklift over and around loaded pallets, boxes and other materials.
• Relocated goods from dock area to appropriate storage locations.
• Performed inspections and made repairs on tractors.
• Communicated with supervisor and other warehouse staff to coordinate work.
• Followed safe practices to mix and apply chemicals.
• Inspected lifts before use to prevent damage to goods.
• Used handheld scanners for warehouse management system compliance.
• Tied and secured loads to prevent shifting or damage to items.
• Unloaded incoming items from trucks and rail cars and transported materials to staging area.
• Maintained yard appearance, keeping ground clean and clear.
• Accurately measured and recorded product weight, dimensions or other production data for use in tag and label creation.
• Operated power material handling equipment to accurately select and palletize loads.
• Positioned lifting devices to secure material or products for transport to designated areas.
• Estimated weights, heights and centers of balance to make precise placements.
• Signaled workers to discharge, dump or level materials.
• Visually assessed materials for conformance to quality standards and shipping orders, removing nonconforming products and reporting for further action.

• Used floor scales to weigh pallets and bundles, documenting weights for company records.
• Recorded bundle weights into company log.
• Loaded or unloaded deliveries and shipments, taking care to avoid damage and safety risks.
• Cleaned and lubricated cables, pulleys and grappling devices.
• Followed related safety regulations, contract requirements, company policies and operating procedures.
• Mentored new employees on safety protocols and equipment procedures.
• Adhered to OSHA safety standards and precautions including weight capacity, tag lines and ground stability.
• Inspected equipment and materials for defects prior to operating cranes to prevent malfunction or damage.
• Updated computer tracking system with all material movements.
• Observed and followed signals of those from individuals directing moving and positioning of loads.

Maintained cranes by inspecting for defects or wear, lubricated ropes and winches and replaced worn out cables.load ibeams and stocked the yard

• Inspected and maintained inventory of all slings, chains, ropes and shackles.
• Maintained cranes by inspecting for defects or wear, lubricated ropes and winches and replaced worn out cables.
• Calculated load weights and verified lifting capacities to prevent overload.
• Guided team members in arranging blocking or outrigging under cranes.
• Verified daily schedules and instructions with project manager prior to beginning work on project.
• Performed routine crane repairs and assisted other operators.
• Used floor scales for weighing bundles.
• Inspected crane mechanisms and lifting accessories to maintain functionality and identify malfunctions.
• Adjusted cables and pulleys to prevent damage to cranes.
• Operated mobile crane and moved materials to various locations.
• Determined crane's load chart and rigging weight to calculate net capacity of every possible configuration.
• Directed work crews for correct placement of blocking and outrigging under cranes.
• Used pendant-operated, overhead and gantry cranes in compliance with safety standards and company guidelines.
• Maintained accurate crane operator log books detailing seat time, jobs, locations, cranes used and daily hours.
• Reviewed daily delivery schedules to determine orders, sequences of deliveries and special loading instructions.
• Monitored cables and grappling devices for wear and replaced cables according to preventive maintenance schedule.
• Reduced hazards and risks by conducting daily inspections on piling cranes and drill rigs.
• Promoted worksite safety by identifying hazards and reporting or correcting immediately.
• Inspected packaging for conformance to regulations and customer requirements.
• Completed assigned tasks accurately and within deadlines to meet site manager's specifications.
• Read and interpreted blueprints to ensure proper placement of materials.
• Trained and monitored junior crane operators, communicating tasks clearly and giving regular, constructive feedback.

• Leveraged micrometers, verniers and gages to accurately inspect parts.
• Observed company's strict safety rules during each shift to avoid job-related injuries.
• Performed routine maintenance on machines and monitored usage to reduce parts breakdown.
• Loaded and unloaded machines to prevent expensive equipment issues.
• Achieved safety, quality and performance standards to meet production schedules.welder helper machinist brake operator sheer operator rolls mills lathes punch sand blast powder coat ect
• Fabricated various parts using multiple machines at once.
• Worked with supervisor to debug and develop production processes and learn machine set-up skills.
• Worked from layout and work order, created programs and set up machines to produce required parts.
• Monitored and adjusted processes or equipment to improve quality and productivity.
• Established and performed quality assurance duties to maintain acceptable production levels.
• Set-up and operated lathes, mills and grinders to cut raw materials.
• Interfaced with machines to adjust settings or tools, driving high-quality production.
• Kept parts within close tolerances of design standards to maintain optimal quality.
• Provided expert coaching and training for new team members.
• Changed out aging tools, fixtures and offsets.
• Used devices, templates and fixtures to measure dimensions of finished workpieces for conformance.
• Read blueprints and 3D models to determine product specifications and plan operational sequences.
• Maintained production tooling by replacing and grinding worn tools.
• Compared numerical displays with process sheet data to verify dimensional adjustments.
• Set controls to regulate speed, feed and coolant flow.