LiveCareer-Resume

calibration technician resume example with 20+ years of experience

Jessica Claire
Montgomery Street, San Francisco, CA 94105 609 Johnson Ave., 49204, Tulsa, OK
Home: (555) 432-1000 - Cell: - resumesample@example.com - - -
Professional Summary

Extensive professional experience using electrical and electronic test instrumentation for testing, calibration, alignment, troubleshooting, maintenance, fabrication, evaluation, and validation of electronic equipment and systems.

Utilize standardized methods for measuring voltage, current, resistance, power, capacitance, inductance, frequency, pressure, torque, and temperature. Implement and comply with ISO 9000, ISO 9001, ISO 9002, ISO 17025 and ANSI / NCSL Z540-1 Quality Management guidelines.

Highly skilled in assembling, repairing and modifying electronic parts and equipment efficiently and with close attention to detail.

Electrical assembly and design specialist with knowledge of computerized controllers, digital circuitry and operational testing.

Capable of working with blueprints and schematics process sheets to assemble circuit boards and subassemblies.

Efficient Electronics Technician experienced in operating wire strippers and torque wrenches. Repairs circuit boards and assembles cables with ease and speed.

Electrical and electronics assembly line and production worker with five years in successful manufacturing operations. Focused on driving results and exceeding expectations.

Capable Electronics Technician  with strong technical knowledge and communication skills. Adheres to all established safety and production procedures.

Skills
  • Specializes in Calibration, Telecom, Wireless and Manufacturing.
  • System troubleshooting
  • Trained in operational testing
  • Microsoft Word proficiency
  • Electromechanical systems expert
  • Detail-oriented
  • Quick learner
  • Blueprint interpretation
  • Wiring diagrams
  • Time management
  • OSHA Safety Training in Labeling Chemical containers and storage.
  • Trained in through-hole and surface mount soldering.
  • Trained in Mircosoft Office.
  • Expertise in digital circuitry
  • Specializes in Metrology.
Work History
04/2013 to 10/2013
Calibration Technician Simco Electronics Springboro, OH,
  • Applied ISO Guide 25, General Requirements for the Competence of Calibration and Testing Laboratories.
  • Performed gowning procedure in clean rooms where special isolation is required for manufacture of 10 inch flat-panel aviation LCD displays in a contamination-free environment and calibration of process control instrumentation.
  • Interpret blueprints, schematics, logic diagrams, and technical equipment manuals.
  • Troubleshoot system to modular level and printed circuit board to component level.
  • Utilize basic hand tools and specialty tools for repair of printed circuit boards, modules, and system sub-assemblies.
  • Perform through-hole and fine-pitched surface mount soldering using temperature controlled soldering iron station.
  • Trained in ESD procedures utilizing wrist strap properly grounded while working with static sensitive CMOS circuitry.
  • Performed calibration of new and existing gages used by production machinists, inspectors and Quality engineers and provided preventive maintenance on measurement equip.
  • Confirmed correct hook-up of sensor lines and complete information display.
  • Maintained and repaired well production and automation equipment.
  • Installed, maintained and recommended appropriate field solutions for electronic products.
  • Maintained proper communications on field automation equipment.
  • Interpreted schematic blueprints, wiring diagrams, performance specifications and service manuals.
  • Conducted highly complex diagnostic and operational tests.
  • Made critical adjustments to component values and settings during testing.
  • Analyzed test results to locate and determine causes of malfunction.
11/2011 to 2012
Test Engineer Charter Spectrum Batesville, SC,
  • Installed and tested applications for Windows 7 smart phones.
04/2011 to 06/2011
Cell Technician Parker-Hannifin, Corporation Hatfield, PA,
  • Assembled, calibrated, aligned and troubleshot range-finder devices used with AV6010 High-Speed Bar-Coding Scanning and Imaging System.
  • Solid-state lasers and camera boards were aligned separately before integrated into one range finder unit.
  • Testing consisted of computer generated software used for aligning lasers, camera board and fully assembled range finder unit.
  • Performed temperature chamber final test on all range finders.
  • Confirmed correct hook-up of sensor lines and complete information display.
  • Inspected equipment for proper performance and correct communication.
  • Maintained and repaired well production and automation equipment.
  • Installed, maintained and recommended appropriate field solutions for electronic products.
  • Maintained proper communications on field automation equipment.
  • Interpreted schematic blueprints, wiring diagrams, performance specifications and service manuals.
  • Conducted highly complex diagnostic and operational tests.
  • Made critical adjustments to component values and settings during testing.
  • Analyzed test results to locate and determine causes of malfunction.
01/2011 to 02/2011
Antenna Assembler and Tester Emerson Electric Co. Pearland, TX,
  • Assembled, soldered and tested Department of Defense antenna assemblies.
  • Conducted highly complex diagnostic and operational tests.
08/2010 to 10/2010
Metrology Technician Flowers Foods Inc. Philadelphia, PA,
  • Calibration of dimensional, temperature, electrical and electronic test instrumentation used for laboratory and field service preventive maintenance operations.
  • Tested, calibrated, troubleshot, and repaired oscilloscopes, hand-held multimeters, high precision digital multimeters, data loggers, ammeters, clamp-on current probes, RF voltmeters, voltage & current calibrators, RF power meters, thermistors, power sensors, signal generators, spectrum analyzers, frequency counters, thermometers, thermocouples, HIPOTS, fault-interrupt circuit boxes, sound level meters, micrometers, calipers, dial indicators, and torque wrenches.
  • Confirmed correct hook-up of sensor lines and complete information display.
  • Inspected equipment for proper performance and correct communication.
  • Installed, maintained and recommended appropriate field solutions for electronic products.
  • Maintained proper communications on field automation equipment.
  • Interpreted schematic blueprints, wiring diagrams, performance specifications and service manuals.
  • Conducted highly complex diagnostic and operational tests.
  • Made critical adjustments to component values and settings during testing.
  • Analyzed test results to locate and determine causes of malfunction.
05/2008 to 07/2008
Production Technician Canon Business Process Services Waltham, MA,
  • Provided customer support services and produced new Primary Flight and Multi-Function Flat Panel Displays for Eclipse 500 System.
  • Tested, troubleshot, and repaired to component level flat panel LCD displays.
  • Performed temperature chamber and vibration test of flat panel displays before final assembly and testing.
  • Confirmed correct hook-up of sensor lines and complete information display.
  • Inspected equipment for proper performance and correct communication.
  • Installed, maintained and recommended appropriate field solutions for electronic products.
  • Maintained proper communications on field automation equipment.
  • Interpreted schematic blueprints, wiring diagrams, performance specifications and service manuals.
  • Conducted highly complex diagnostic and operational tests.
  • Made critical adjustments to component values and settings during testing.
04/2007 to 03/2008
Mechanical Technician Simco Electronics Longmont, CO,
  • Mapped permanent magnets individually and collectively using Microsoft Excel, Lab VIEW software and P.C.
  • interfaced to gauss meter, motor drive and test magnetometer.
  • Developed a graphical analysis of the combined gauss levels of each permanent magnet and developed a linear solution represented by Excel graphs.
  • A total of thirty-six permanent magnets are combined and tested for the flattest possible response for the magnetic resonance imaging sensor receiver section.
  • This MRI sensor is part of the oil drilling tool.
  • This enabled the MRI sensor in the drilling tool to distinguish between oil and water deep underground.
  • Confirmed correct hook-up of sensor lines and complete information display.
  • Inspected equipment for proper performance and correct communication.
  • Installed, maintained and recommended appropriate field solutions for electronic products.
  • Maintained proper communications on field automation equipment.
  • Interpreted schematic blueprints, wiring diagrams, performance specifications and service manuals.
  • Conducted highly complex diagnostic and operational tests.
  • Made critical adjustments to component values and settings during testing.
  • Analyzed test results to locate and determine causes of malfunction.
11/2006 to 02/2007
Field Calibration Technician Ametek, Inc. Grand Junction, CO,
  • Performed onsite / laboratory calibration and maintenance of process control equipment.
  • Confirmed correct hook-up of sensor lines and complete information display.
  • Inspected equipment for proper performance and correct communication.
  • Installed, maintained and recommended appropriate field solutions for electronic products.
  • Maintained proper communications on field automation equipment.
  • Tested and maintained computer-related industrial electronic control systems and electrical components.
  • Interpreted schematic blueprints, wiring diagrams, performance specifications and service manuals.
  • Conducted highly complex diagnostic and operational tests.
  • Made critical adjustments to component values and settings during testing.
04/2006 to 08/2006
Calibration Technician Emerson Electric Co. Russellville, KY,
  • Calibrated and repaired micrometers, calipers, plugs, threaded set plugs, threaded ring gages, dial indicators, snap gages, depth gages and torque wrenches.
  • Inspected equipment for proper performance and correct communication.
  • Maintained proper communications on field automation equipment.
  • Conducted highly complex diagnostic and operational tests.
  • Made critical adjustments to component values and settings during testing.
11/2005 to 03/2006
Electronics Technician Simco Electronics Mahwah, NJ,
  • Maintained flight information display monitors, terminal public announcement sound system, security field equipment, gas sensor monitoring system, smoke and fire alarms, and radio communications.
  • Provided on-call service regarding these systems at the Philadelphia International Airport.
  • Analyzed system troubles, making essential adjustments or repairs when necessary.
  • Tested and calibrated test instrumentation field equipment.
  • Confirmed correct hook-up of sensor lines and complete information display.
  • Inspected equipment for proper performance and correct communication.
  • Installed, maintained and recommended appropriate field solutions for electronic products.
  • Tested and maintained computer-related industrial electronic control systems and electrical components.
  • Interpreted schematic blueprints, wiring diagrams, performance specifications and service manuals.
  • Conducted highly complex diagnostic and operational tests.
  • Made critical adjustments to component values and settings during testing.
  • Analyzed test results to locate and determine causes of malfunction.
04/2003 to 10/2005
Metrology Technician Apex Systems Mission, KS,
  • Confirmed correct hook-up of sensor lines and complete information display.
  • Inspected equipment for proper performance and correct communication.
  • Installed, maintained and recommended appropriate field solutions for electronic products.
  • Interpreted schematic blueprints, wiring diagrams, performance specifications and service manuals.
  • Conducted highly complex diagnostic and operational tests.
  • Made critical adjustments to component values and settings during testing.
  • Analyzed test results to locate and determine causes of malfunction.
02/2002 to 04/2003
Calibration Technician Apex Systems Neenah, WI,
  • Utilized calibration characteristic capabilities involving dimension, torque, pressure, voltage, current, resistance, power, frequency, time, and temperature.
  • Performed onsite / laboratory calibration of oscilloscopes, frequency counters, multimeters, ammeters, signal generators, digital tachometers, thermometers, pressure gages, micrometers, calipers, dial indicators, torque wrenches, pin sets and surface plates using Labmate software.
  • Confirmed correct hook-up of sensor lines and complete information display.
  • Inspected equipment for proper performance and correct communication.
  • Installed, maintained and recommended appropriate field solutions for electronic products.
  • Maintained proper communications on field automation equipment.
  • Tested and maintained computer-related industrial electronic control systems and electrical components.
  • Interpreted schematic blueprints, wiring diagrams, performance specifications and service manuals.
  • Conducted highly complex diagnostic and operational tests.
  • Made critical adjustments to component values and settings during testing.












07/2001 to 10/2001
Electronics Production Technician Department Of Defense Huntsville, AL,
  • Assembled, modified, tested, calibrated, troubleshot and repaired helium-neon laser trackers for three-dimensional metrology.
  • Used proprietary software for calibration and test instrumentation and schematics for testing, calibration and diagnostics of laser trackers.
  • Confirmed correct hook-up of sensor lines and complete information display.
  • Inspected equipment for proper performance and correct communication.
  • Installed, repaired and troubleshot numerical controls.
  • Conducted highly complex diagnostic and operational tests.
  • Made critical adjustments to component values and settings during testing.
03/1996 to 04/2001
Electronics Technician Communication Test Design, Inc City, STATE,
  • Performed testing, troubleshooting, modification and repair of telecommunication and cellular communications equipment.
  • Performed functional and in-circuit testing of Lucent base station cell-site circuit boards.
  • Functional testing required a CDMA test shelf, P.C.
  • with I/O card, serial connection using RS-422 card, shelf power supply, and Lab VIEW and Lucent test software.
  • Utilized Agilent 3070 in-circuit tester with Lucent test fixtures to test cell site printed circuit boards to localize faulty circuitry.
  • Tested, modified, and repaired Motorola and QUALCOMM analog / digital cellular phones, utilizing a base station test stimulator in order to test call processing simulating a call environment.
  • Administered functional testing and maintenance to tip and ring, ISDN, DSL, T1, T3 and fiber optic TDM.
  • Confirmed correct hook-up of sensor lines and complete information display.
  • Inspected equipment for proper performance and correct communication.
  • Installed, maintained and recommended appropriate field solutions for electronic products.
  • Maintained proper communications on field automation equipment.
  • Tested and maintained computer-related industrial electronic control systems and electrical components.
  • Interpreted schematic blueprints, wiring diagrams, performance specifications and service manuals.
  • Conducted highly complex diagnostic and operational tests.
  • Made critical adjustments to component values and settings during testing.
  • Analyzed test results to locate and determine causes of malfunction.
11/1988 to 08/1995
Electronics Technician Philadelphia Naval Shipyard City, STATE,
  • Maintained electrical and electronic calibration reference standard apparatus used for calibration of secondary working standard apparatus and general-purpose test equipment.
  • Performed calibration and maintenance of test instrument standard apparatus traceable to National Institute of Standards and Technology.
  • Tested, troubleshot and repaired oscilloscopes, high precision digital multimeters, voltage and current calibrators, RF signal generators, power meters and frequency counters.
  • Performed standard volt measurements for electrical standards laboratory, comparing transferable electronic reference standards against a standard cell bank with tractability to NIST.
  • Performed insertion-loss and reflected power measurements of RF cables, wave-guide, attenuators, isolators, directional couplers and antennas using RF generator source and plug-in, power meter, SWR meter, graph recorder and network analyzers.
  • Wrote and revised calibration procedures.
  • Confirmed correct hook-up of sensor lines and complete information display.
  • Inspected equipment for proper performance and correct communication.
  • Maintained proper communications on field automation equipment.
  • Interpreted schematic blueprints, wiring diagrams, performance specifications and service manuals.
  • Conducted highly complex diagnostic and operational tests.
  • Made critical adjustments to component values and settings during testing.
  • Analyzed test results to locate and determine causes of malfunction.
08/1977 to 11/1988
Electronics Mechanic Philadelphia Naval Shipyard City, STATE,
  • Knowledge of electrical and electronic theory, as well as digital fundamentals.
  • Expertise in use of test instrumentation.
  • Read and interpreted calibration procedures and technical manuals, schematic diagrams, truth tables and flow charts.
  • Troubleshot to component level on electronics printed circuit board.
  • Calibration, testing, troubleshooting and repair of electronics test instruments used in production electronics shop.
  • Provided technical assistance and guidance to apprentices and peers regarding calibration, diagnostics and repair of complex test instruments.
  • Performed overhaul and restoration of Naval Tactical Data Systems (NTDS), specifically operational summery consoles, radar switchboards and printed circuit board maintenance.
  • Confirmed correct hook-up of sensor lines and complete information display.
  • Inspected equipment for proper performance and correct communication.
  • Interpreted schematic blueprints, wiring diagrams, performance specifications and service manuals.
  • Conducted highly complex diagnostic and operational tests.
  • Made critical adjustments to component values and settings during testing.
  • Analyzed test results to locate and determine causes of malfunction.
Education
Expected in to to
Associate of Science: Technical Studies
Delaware County Community College - Media, PA
GPA:
  • Coursework in Electronics and Communication Engineering Technology and Electrical Engineering Communications Technology
Expected in to to
Algebra & Trigonometry English Composition:
Drexel University - ,
GPA:
Expected in 1977 to to
Certificate of Apprenticeship: Electronics Mechanic Journeyman
Philadelphia Naval Shipyard Apprenticeship - Philadelphia, PA
GPA:
Expected in to to
Bachelor of Science: Electrical Engineering
Drexel University - Philadelphia, PA
GPA:
  • Coursework in Electronics and Communication Engineering Technology and Electrical Engineering Communications Technology
Certifications

By clicking Customize This Resume, you agree to our Terms of Use and Privacy Policy

Your data is safe with us

Any information uploaded, such as a resume, or input by the user is owned solely by the user, not LiveCareer. For further information, please visit our Terms of Use.

Resume Overview

School Attended

  • Delaware County Community College
  • Drexel University
  • Philadelphia Naval Shipyard Apprenticeship
  • Drexel University

Job Titles Held:

  • Calibration Technician
  • Test Engineer
  • Cell Technician
  • Antenna Assembler and Tester
  • Metrology Technician
  • Production Technician
  • Mechanical Technician
  • Field Calibration Technician
  • Calibration Technician
  • Electronics Technician
  • Metrology Technician
  • Calibration Technician
  • Electronics Production Technician
  • Electronics Technician
  • Electronics Technician
  • Electronics Mechanic

Degrees

  • Associate of Science
  • Algebra & Trigonometry English Composition
  • Certificate of Apprenticeship
  • Bachelor of Science

By clicking Customize This Resume, you agree to our Terms of Use and Privacy Policy

*As seen in:As seen in: