trash man resume example with 13+ years of experience
Jessica Claire
- 609 Johnson Ave.49204TulsaOK 100 Montgomery St. 10th Floor
- (555) 432-1000
- resumesample@example.com
- Date of Birth:
- India:
- single:
- Religion:
- Military service:
- :
Summary
I have over 24 years of work experience, starting with a paper route when I was 13 years old. Over the years, my work ethic has been strengthened. I have experience in regards to rigging, and I am somewhat mechanically inclined. Previously, I held the title of a CNC Machinist with extensive setup experience. I have also been a Hands-on Machine Operator offering 10 years of experience working in manufacturing settings and operating machinery for production. With gauging techniques to inspect parts and conduct measurements, I am productive and reliable.
Skills
|
|
Experience
Trash Man, 11/2020 - Current
Cf Industries, Inc. – Mount Vernon, NY
Cf Industries, Inc. – Mount Vernon, NY
- Lifted trash containers and climbed in and out of trucks without limitation and without injury or reduced effectiveness or speed.
- Dumped containers completely, left customer's location clean and free of debris, securely closed containers and prevented containers from inhibiting traffic flow.
- Verified number of containers on route and at each location matched service level listed and reported discrepancies.
- Dropped off and picked up roll-off containers, verified proper tie-downs and reported on needed truck maintenance.
- Mastered residential and commercial route navigation and serviced 250 customers per day using either front or rear end load lift attachment.
- Notified management or dispatcher of service interruptions, including blocked containers, closed lots, streets or alleyways and potential safety hazards.
- Worked closely with management to improve route efficiencies and identify best practices and reported incidents, accidents, injuries or property damage.
- Drove garbage trucks on specified routes, collected and loaded solid waste and recyclables and transported to appropriate disposal or recycling sites.
- Communicated customer requests to dispatcher or manager and identified and reported containers needing repair or replacement.
- Performed standardized pre-trip and post-trip vehicle inspections and operated hydraulic hand controls to lift and load residential and commercial trash cans to dispose of trash.
- Conferred with customers to resolve garbage overage issues and maintain team efficiency.
- Compressed collected items to maintain storage efficiency.
- Inspected vehicles before and after route trips and completed minor repairs as needed.
- Traveled to disposal sites to dump refuse and recyclable materials into appropriate locations.
- Checked road and weather conditions to determine impact on transportation routes.
- Refueled vehicle and checked fluid levels at completion of each shift.
- Observed all traffic laws and speed limits to avoid accidents.
- Used GPS for alternative routes during heavy traffic periods and road closures.
Operator, 01/2020 - 04/2020
Keysight Technologies – Austin, TX
Keysight Technologies – Austin, TX
- Cleaned and lubricated equipment on regular schedules to maintain life of machinery and achieve consistent operations.
- Maintained correct temperature, levels and pressures on process systems and equipment.
- Created and maintained daily activity logs to track ongoing operational performance.
- Practiced safe lockout-tagout procedures to prevent injury to personnel during maintenance procedures.
- Calibrated each machine at beginning and end of each shift.
- Removed and replaced tools and dyes to complete various tasks.
- Received and processed written and verbal instructions, prints and work orders.
- Regulated system conditions to balance power generation, cost and safety concerns.
- Set up machines for various jobs to maintain compliance with manufacturing thresholds and waste reduction initiatives.
- Evaluated materials for quality and sorted parts and final products.
- Put completed products into packages and moved to staging locations.
- Monitored operating power plant equipment and readouts to identify problems and pursue corrective action.
- Compiled operational data into reports to help management spot trends and resolve problems.
- Maintained open communication with systems operators to keep line voltages, transmission loads and frequencies in check.
- Identified machinery issues and repaired parts to keep equipment up and running.
- Selected proper cutting tools, calculating parameters to manufacture components and parts.
- Met or exceeded target of 80% on-time customer shipments with motivational approach to team leadership.
- Identified and helped resolve nonconforming product issues to support accurate order fulfillment.
- Maintained work environments safe and efficient at all times.
- Assigned individual work plans and reviewed jobs to accomplish all tasks within expected parameters.
Machinist, 04/2017 - 01/2020
Malt-O-Meal – Saint Louis, MO
Malt-O-Meal – Saint Louis, MO
- Calibrated machinery to optimize performance according to prescribed standards and specific project needs.
- Supported inventory longevity by building and maintaining equipment to promote effective mechanical and safety usage.
- Sharpened, replaced and tracked cutting tools to adhere to strict quality control and usage schedules.
- Increased equipment lifespans by incorporating thorough preventive and corrective maintenance processes.
- Fabricated tools, jigs and fixtures to meet manufacturing and engineering needs.
- Monitored feed and speed of machines during machining process to report problems and required repairs.
- Executed on-time, under-budget project management on complex industrial equipment, including metal and precision part machining issues.
- Designed detailed preventive maintenance schedules to enhance tool performance.
- Dismantled and inspected components to complete necessary adjustments and repairs.
- Measured and marked dimensions and reference points to meet precise specifications.
- Sustained safety protocol, including lock out and tag out, by properly and cost-effectively using equipment and materials.
- Constructed appropriate offset corrections for tool wear, broken tools and casting variations.
- Maintained logs, lists and files and promptly completed all necessary paperwork.
- Measured, marked and indicated dimensions and reference points on materials.
- Gauged and maintained tolerances on grinding diameters, depths, squareness and parallelism.
- Trained, directed and instructed apprentices and helpers to increase production levels and meet established goals.
- Selected appropriate speeds and feeds according to metal type and finish specifications.
- Executed bench, machine and hand tool work by shaping, fitting and assembling machine parts from metal stock.
- Operated hand tools, drill presses, riveting machines and tap burners to safely produce projects.
- Monitored and adjusted processes or equipment to improve quality and productivity.
Machine Operator, 03/2007 - 04/2017
GSI – City, STATE
GSI – City, STATE
- Read and understood blueprints, product specifications and tooling instructions to plan correct operational sequences and prevent materials waste.
- Selected proper cutting tools, calculating parameters to manufacture components and parts.
- Detected work-piece defects and machine malfunctions, maintaining apparatus to prevent future issues.
- Established and adjusted feed rates and cutting parameters to keep operations in line with production demands.
- Fastened and adjusted jigs and stops on machine tables to facilitate positioning of materials.
- Operated multiple fabricating machines, including cutoff saws, shears, rolls, brakes, presses and forming or spinning machines.
- Lubricated parts and performed minor maintenance to improve machine function.
- Executed bench, machine and hand tool work by shaping, fitting and assembling machine parts from metal stock.
- Used CNC and manual equipment to perform rough and finishing machining, working with tin, sheet iron and sheet copper.
- Set up machines for various jobs to maintain compliance with manufacturing thresholds and waste reduction initiatives.
- Maintained assigned equipment and performed daily inspections to increase equipment lifetimes and cut costs.
- Documented daily production data and submitted accurate time logs to keep management up-to-date, using software.
- Identified and helped resolve nonconforming product issues to support accurate order fulfillment.
- Established and enforced 5s program successful in increasing line efficiency and dropping accidents significantly per quarter.
- Maintained work environments safe and efficient at all times.
- Met or exceeded target of on-time customer shipments with motivational approach to team leadership.
- Controlled material usage to keep costs low, proactively investigating and resolving discrepancies to minimize waste.
Education and Training
GED: , Expected in 06/2007
Paris High School - Paris, IL
Paris High School - Paris, IL
By clicking Customize This Resume, you agree to our Terms of Use and Privacy Policy
Your data is safe with us
Any information uploaded, such as a resume, or input by the user is owned solely by the user, not LiveCareer. For further information, please visit our Terms of Use.
Resume Overview
School Attended
- Paris High School
Job Titles Held:
- Trash Man
- Operator
- Machinist
- Machine Operator
Degrees
- GED
By clicking Customize This Resume, you agree to our Terms of Use and Privacy Policy
*As seen in:As seen in:![Forbes]()
![CNet]()
![Business Insider]()
![Mashable]()
![The New York Times]()