Seeking a challenging position in the field of Coating Corrosion Control Management who oversees Coating Corrosion policies, and ensures safe conditions in a work environment to prevent harm, injury or illness and assists in monitoring and coordinating general organization's Coating Corrosion program.
QA/QC Supervisor01/2011 to 01/2014 FLUOR / Bagram Air Field
Managed Quality Control activities at various construction sites.
Ensured site quality records are maintained.
Performed construction site quality compliance audits.
Developed corporate construction site procedures.
Interfaced with client's construction supervisors and QC personnel to deal with Specific issues.
Provided and communicated quality findings.
Observed work in progress, ensured that proper safety equipment was worn and procedures followed.
Made recommendations for corrections and follow up to ensure that violations were corrected.
Supervise and train 7 TCNs and 5 LNs (local national) Under the N.E.D Program on HVAC procedures and safe work practices.
Analyzed hazards and developed ergonomic risk assessments for both public and non-public areas.
Resolved complaints and made recommendations to management for corrective action, as required.
Conducted or provided for employee safety training.
Reviewed accidents and made recommendation for prevention of similar future incidents.
Conducted record keeping principles and practices.
Coating/Blaster Insulator Inspector Quality Control01/2010 to 01/2011 Northrop Grumman
Inspection of painting and monitoring the painting process to achieve the required Project Specification Quality.
Inspection of structural, piping & equipment Witness test panel painting, adhesion tests (x-cut, cross hatch, pull off test) prior to commencement of painting job.
Witness operator qualification test (bend test) & procedure qualification test (bend test & pull off test) for Thermal Spray Aluminum application.
To carryout salt contamination tests on blasted surface to ensure the salt level is within the specified limits.
Witness Holiday Detection test for internal coated piping/tanks, pipelines external and underground piping.
Witness Adhesion test & curing test (DSC analysis) for FBE coating Performed skilled painting work - applying paints, solvents, sealants, and synthetic interior and external finishes involved in construction, maintenance, repair - required to maintain facilities in safe and efficient condition.
Surveillance during PUF spray application and witness thickness check, pull off adhesion test.
Witness tensile, compression, thermal conductivity, reactivity tests for PUF test samples at site laboratory.
Verification of insulation materials such as Poly Isocynurate (PIR), Polyurethane foam (PUF), Foam glass, Glass wool, Rock wool boards, Reinforcement cloth, Filament tape, Butyl rubber, Stainless steel bands, Clips, Rivets, Cladding sheets, Primary & secondary.
QA Inspector Sub contractor01/2008 to 01/2010 CTR
Managed all functions and activities within the Quality Assurance Department.
Analyzed trends to identify potential hazardous areas.
Insured that the company is in full specification of the customer's contract.
Maintained records and daily inspection reports, inspection logs and inspection sign off reports.
Coordinated technical support tasks.
Excised leadership and motivational techniques towards work center personnel.
Painter/Blaster Supervisor01/2003 to 01/2007 US NAVY
Supervised/Trained 12 man crew.
Dispose of hazardous waste in an appropriate manner.
Select paint according to requirements, and match colors of paint following specified color charts.
Mix paints to match color specifications, then stir and thin the paints, using spatulas or power mixing equipment.
Remove grease, dirt, paint, or rust from vehicle surfaces in preparation for paint application, using abrasives, solvents, brushes, washing tanks.
Monitor painting operations to identify flaws, such as blisters or streaks, and correct their causes.
Disassemble, clean, and reassemble sprayers and power equipment, using solvents, wire brushes, and cloths for cleaning duties.
Spray prepared surfaces with specified amounts of primers and decorative or finish coatings.
Obtained surfaces by washing with solutions and with pressure Performed plane glass repairs.
Sandblast according to Supervisor specification.
Perform different blasting task using several methods to Navy/ SSPC Regulations.
Use of various types of blast equipment while accessing tanks in confined spaces.
Bachelor's Degree: Occupational HealthMay - 2017Columbia Southern UniversityOrange Beach, ALOccupational Health
ATI - Mechanical Engineering/HVAC
*132 Hour OSH Professional